DANGER: -
-
CAUTION:
ICM2805A
ICM2805A
NOTE: Do not flex the ICM2805A circuit board. Apply pressure only at
the standos.
ICM2805A
ICM2805A
ICM2805A
NOTE: Do not flex the ICM2805A circuit board. Apply pressure only at
the standos.
ICM2805A
ICM2805A
ICM2805A
NOTE: Do not flex the ICM2805A circuit board. Apply pressure only at
the standos.
INSTALLATION, OPERATION & APPLICATION GUIDE
www.icmcontrols.com
ICM2805A
Furnace Control Board
G3RC AND G4 FURNACE MODELS (SEE FIG. 1)
G5 FURNACE MODELS (NO MODIFICATIONS REQ.)
G6, M2 & M3 FURNACE MODELS
(NO MODIFICATIONS REQ.)
MODIFICATION
IS REQUIRED FOR
G3RC AND G4
MODELS ONLY.
If the P2 plug has
4 black wires
in positions
1 and 4, 3 and 6;
the modication
is not required.
Figure 1
