ICOP Technology VSX-DIP-PCI-V2 User manual

VSX/VDX-DIP-PCI Development Kit
&
VSX-DIP-PCI-V2 CPU Module
with 5S/4USB/LAN/2GPIO 128MB DDR2 Onboard
User’s Manual
(Revision 1.0A)

Copyright
The information in this manual is subject to change without notice for continuous improvement in
the product. All rights are reserved. The manufacturer assumes no responsibility for any
inaccuracies that may be contained in this document. And makes no commitment to update or to
keep current the information contained in this manual.
No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part,
in any form or by any means without the prior written permission of the ICOP Technology Inc.
Copyright 2007 ICOPTechnology Inc.
Manual No. IUMVSX-DIP-PCI-V2000-01 Ver.1.0A July, 2010
Trademarks Acknowledgment
Vortex86SXis the registered trademark of ICOP Technology Inc.
Other brand names or product names appearing in this document are the properties
and registered trademarks of their respective owners. All names mentioned herewith
are served for identification purpose only.

T a b l e o f C o n t e n t s
T ab l e o f C o n t e n t s.............................................................iii
C h a p t e r 1 Introduction……………………………………………1
1.1 Packing List............................................................1
1.2 Product Description................................................2
1.3 Specifications.........................................................3
1.4 Board Dimension....................................................6
C h a p t e r 2 Installation……………………………………………..8
2.1 Board Outline.........................................................8
2.2 Connectors & Jumpers Location...........................11
2.3 Connectors & Jumpers Summary.........................13
2.4 PinAssignments & Jumper Settings.....................14
2.5 System Mapping...................................................24
2.6 Watchdog Timer...................................................27
2.7 GPIO....................................................................28
2.8 SPI flash...............................................................29
C h a p t e r 3 Driver Installation……………………………………30
Appendix ………………………………………………………………..31
A. TCP/IPlibrary for DOS real mode.............................31
B. VSX-DIP-PCI & VSX-DEV-204-PCI Schematic.........32
C. BIOS Default Setting.................................................33
Warranty............................................................................................34

VSX-DIP-PCI-V2 Vortex86SXDIP-204pin-PCI CPU Module
1
C h a p t e r 1
Introduction
1.1 Packing List
Product Name Package
VSX-DEV-204-PCI
Vortex86SX/DX CPU VSX/VDX-DIP-PCI
Development board x1
RS232 cable x 2
IDE cable (2.0 ) x 1
IDE cable (2.54 ) x 1
GPIO cable x 3
Product Name Package
VSX-DIP-PCI-V2
Embedded Vortex86SX DIP 204pin-PCI
CPU Module x1
Product Name Package
PCI-VGA-Z9s
XGI Z9S VGA/ DVI PCI board x1

VSX-DIP-PCI-V2 Vortex86SXDIP-204pin-PCI CPU Module 2
1.2 Product Description
The VSX-DIP-PCI-V2 family of low-power x86 embedded controller is designed to meet
DIP-204pin-PCI specification, and integrated with the following features.
300MHz Vortex86SX System-On-Chip
128 / 256MB DDR2 system memory
4 USB 2.0 (host)
Up to 5 serial ports (TX/RX x1)
16-bit GPIO x2
4PCIbus
2 watchdog timer
Enhanced IDE
JTAG interface
AMI BIOS
2MB SPI flash
Single voltage +5V DC
Support extended operating
temperature range of -20°C to +70°C
VSX-DIP-PCI-V2 is suitable for broad range of data-acquisition, Industrial automation, Process
control,Automotive controller,AVL, Intelligent Vehicle management devic,Medical device, Human
machine interface, Robotics, machinery controlAnd more…application that required small
footprint, low-power and low-cost hardware with open industry standard such as DIP-204pin-PCI.
For assisting users easily use our DIP-204pin-PCI Module, ICOP provides complete development
kit of DIP-204pin-PCI Development Board for DIP-204pin-PCI Module. We also supply our
customers with referential circuit diagram foreasing user’s effort during development process.
Meanwhile, you can design your own based board which only equips I/O functions you need.
Please visit our website for getting further information: http://www.dmp.com.tw/tech/vortex86dx/
You also can contact us for getting referential circuit drawing: [email protected]

VSX-DIP-PCI-V2 Vortex86SXDIP-204pin-PCI CPU Module 3
1.3 Specifications
VSX / VDX-DEV-204-PCI
Features VSX-DEV-204-PCI
Bus Interface PCI Bus interface
Connectors
2.54mm 40-pin header for IDE x1
2.54mm 20-pin header for GPIO x3
2.54mm 10-pin header for RS-232 x2
2.0mm 44-pin header for IDE x1
124-pin slot for PCI x4
External RJ-45 connector for Ethernet x1
External USB connector x4
External 9-pin D-Sub male connector for RS-232 x4
External 6-pin Mini DIN connector for Keyboard x1
External 6-pin Mini DIN connector for Mouse x1
External 3-pin Mini DIN connector for Power x1
Power Requirement Single Voltage +5V @ 250mA
Dimension 240 X 160 mm (9.45 x 6.3 inches)
Weight 300g
Operating
Temperature -20oC ~ +70oC
-40°C ~ +85°C (Optional)

VSX-DIP-PCI-V2 Vortex86SXDIP-204pin-PCI CPU Module 4
VSX-DIP-PCI-V2
Features VSX-DIP-PCI-V2
CPU DM&P SoC CPU Vortex86SX- 300MHz
Real Time Clock with Lithium Battery Backup
Cache L1:16K I-Cache, 16K D-Cache
BIOS AMI BIOS
Bus Interface PCI interface
System Memory 128 / 256MB DDR2 onboard
Watchdog Timer Software programmable from 30.5 us to 512 seconds x2
sets(Watchdog 1 fully compatible with M6117D)
LAN Integrated 10/100M Ethernet
I /O Interface Enhanced IDE port x1
RS-232 port x5 (TX/RX x1)
USB port x4
16-bit GPIO port x2
Connectors 1.25mm 6-pin Wafer for JTAG x1
2.00 mm 34-pin header for PCI interface x6
Flash Disk Support
Onboard 2MB SPI Flash Disk (Driver: A)
Power Requirement Single Voltage +5V @ 280mA
Dimension 70 X 45mm (2.75 x 1.77 inches)
Weight 23g
Operating
Temperature -20oC ~ +70oC
-40°C ~ +85°C (Optional)

VSX-DIP-PCI-V2 Vortex86SXDIP-204pin-PCI CPU Module 5
PCI-VGA-Z9s
Features PCI-VGA-Z9s
Chipset
XGI Volari Z9s Chipset
Bus PCI Bus
Video Memory 32MB DDR2 VGA Memory, support resolution up to 1600
x 1200 @ 16M
Connectors
External 15-pin D-Sub Female connector for VGA x1
External DVI Female connector for VGA x1
Operating
Temperature 0oC ~ +60oC

VSX-DIP-PCI-V2 Vortex86SXDIP-204pin-PCI CPU Module 6
1.4 Board Dimension
VSX-DEV-204-PCI

VSX-DIP-PCI-V2 Vortex86SXDIP-204pin-PCI CPU Module 7
VSX-DIP-PCI-V2

VSX-DIP-PCI-V2 Vortex86SXDIP-204pin-PCI CPU Module 8
C h a p t e r 2
Installation
2.1 Board Outline
VSX / VDX -DEV-204-PCI

VSX-DIP-PCI-V2 Vortex86SXDIP-204pin-PCI CPU Module 9
VSX-DIP-PCI-V2

VSX-DIP-PCI-V2 Vortex86SXDIP-204pin-PCI CPU Module 10
PCI-VGA-Z9s
VSX-DIP-PCI-V2 Development Kit
VSX-DIP-PCI-V2

VSX-DIP-PCI-V2 Vortex86SXDIP-204pin-PCI CPU Module 11
2.2 Connectors & Jumpers Location
Connectors
VSX / VDX-DEV-204-PCI

VSX-DIP-PCI-V2 Vortex86SXDIP-204pin-PCI CPU Module 12
VSX-DIP-PCI-V2

VSX-DIP-PCI-V2 Vortex86SXDIP-204pin-PCI CPU Module 13
2.3 Connectors & Jumpers Summary
VSX / VDX-DEV-204-PCI
Summary Table
Nbr Description Type of Connections Pin nbrs.
J3 PCI 1 bus PCI-5V_Slot_120P
J4 PCI 2 bus PCI-5V_Slot_120P
J5 PCI 3 bus PCI-5V_Slot_120P
J6 PCI 4 bus PCI-5V_Slot_120P
J7 COM3:RS232 /TTLMode
Selector Box Header, 2.54, 5x2 10-pin
J8 COM4:RS232 /TTLMode
Selector Box Header, 2.54, 5x2 10-pin
J9 COM1:TTL/ GPIO
COM2:TTL
Box Header, 2.54, 10x2 10-pin
J10 Reset Pin Header, 2.54, 1x2 2-pin
J11 PS/2 Keyboard / Mouse Mini-DIN Female 6-pin
J13 IDE Connector Box Header, 2.0,22x2 44-pin
J14 IDE Connector Box Header, 2.54, 20x2 40-pin
J15 DC +5V Input Mini-DIN Female 3-pin
J16 Power Connector Terminal Block 5.0, 2x1 2-pin
J17 GPIO Port 0 / 1 Box Header, 2.54,10x2 20-pin
J18 GPIO Port 2 / 3 Box Header, 2.54,10x2 20-pin
J45A/J45B
COM1 / COM2 D-Sub Male 9-pin
J46A/J46B
COM3 / COM4 D-Sub Male 9-pin
USB1 USB 2/ USB 3 USB connector 8-pin
USB2 USB 0/ USB 1 USB connector 8-pin
JH7
JH12
x-PCI & Multi I/O
Connector-204 Pin
Pin Header, 2.034x6
204-pin
SP1 BUZZER
SW1 Power SWITCH
IDE- LED IDEActive LED (Green ) LED-SMD
PWR-LED PowerActive LED (Red) LED-SMD

VSX-DIP-PCI-V2 Vortex86SXDIP-204pin-PCI CPU Module 14
2.4 Pin Assignments & Jumper Settings
VSX / VDX-DEV-204-PCI
J7: COM 3: RS232 / TTL Mode Selector
Pin # Signal
Name Pin # Signal Name
1 DCD3 2 RXD3
3 TXD3 4 DTR1
5 GND 6 DSR1
7 RTS3 8 CTS1
9 RI3 10 NC
Note: Add 0 ohm on R38 position, COM3 will change to TTL
J8: COM4: RS232 / TTL Mode Selector
Pin # Signal Name
Pin # Signal Name
1 DCD4 2 RXD4
3 TXD4 4 DTR4
5 GND 6 DSR4
7 RTS4 8 CTS4
9 RI4 10 NC
Note: Add 0 ohm on R39 position, COM3 will change to TTL

VSX-DIP-PCI-V2 Vortex86SXDIP-204pin-PCI CPU Module 15
J9: COM1: TTL / GPIO4 ; COM2: TTL
J10: RESET
Pin # Signal Name
Pin # Signal Name
1 Reset 2 GND
J11: PS/2 Keyboard / Mouse
Pin # Signal Name
Pin # Signal Name
1 KBDATA 2 NC
3 GND 4 VCC
5 KBCLK 6 NC
7 MSDATA 8 NC
9 GND 10 VCC
11 MSCLK 12 NC
13 GGND 14 GGND
15 GGND 16 GGND
17 GGND
Pin # Signal Name
Pin # Signal Name
1 GND 2 VCC
3 DCD1/GP40 4 DCD2
5 TXD1/GP41 6 TXD2
7 RTS1/GP42 8 RTS2
9 RI1/GP43 10 RI2
11 RXD1/GP44 12 RXD2
13 DTR1/GP45 14 DTR2
15 DSR1/GP46 16 DSR2
17 CTS1/GP47 18 CTS2
19 TXDEN1 20 TXDEN2

VSX-DIP-PCI-V2 Vortex86SXDIP-204pin-PCI CPU Module 16
J13: IDE (44 Pins)
Pin # Signal Name
Pin # Signal Name
1 IDERST 2 GND
3 IDED7 4 IDED8
5 IDED6 6 IDED9
7 IDED5 8 IDED10
9 IDED4 10 IDED11
11 IDED3 12 IDED12
13 IDED2 14 IDED13
15 IDED1 16 IDED14
17 IDED0 18 IDED15
19 GND 20 NC
21 IDEREQ 22 GND
23 IDEIOW 24 GND
25 IDEIOR 26 GND
27 ICHRDY 28 GND
29 IDEACK 30 GND
31 IDEINT 32 NC
33 IDESA1 34 IDECBLID
35 IDESA0 36 IDESA2
37 IDECS-0 38 IDECS1
39 IDELED 40 GND
41 VCC 42 VCC
43 GND 44 NC