Icop VDX-6317RD-X User manual

VDX-6317RD-X
DM&P Vortex86DX 800MHz
Mity-Mite CPU Module
with 1S/USB/LAN/GPIO/PWMx16
256MB DDR2 Onboard
User’s Manual
(Revision 1.1A)

Copyright
The information in this manual is subject to change without notice for continuous improvement in
the product. All rights are reserved. The manufacturer assumes no responsibility for any
inaccuracies that may be contained in this document and makes no commitment to update or to
keep current the information contained in this manual.
No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part,
in any form or by any means without the prior written permission of the IC P Technology Inc..
Copyright 2008 IC P Technology Inc.
Manual No. IUM6317D000-01 Ver.1.0A March, 2011
Manual No. IUM6317RD000-01 Ver.1.1A September, 2014
Trademarks Acknowledgment
Vortex86DX is the registered trademark of IC P Technology Inc.
ther brand names or product names appearing in this document are the properties
and registered trademarks of their respective owners. All names mentioned herewith
are served for identification purpose only.

T a b l e o f C o n t e n t s
T a b l e o f C o n t e n t s ............................................................. iii
C h a p t e r 1 Introduction……………………………………………1
1.1 Packing List ............................................................ 1
1.2 Product Description ................................................ 2
1.3 Specifications ......................................................... 3
1.4 Board Dimension .................................................... 4
C h a p t e r 2 Installation……………………………………………..5
2.1 Board utline ......................................................... 5
2.2 Connectors & Jumpers Location .................... ........6
2.3 Connectors & Jumpers Summary ........................... 8
2.4 Pin Assignments & Jumper Settings ....................... 9
2.5 System Mapping ................................................. 133
2.6 Watchdog Timer ................................................... 16
2.7 GPI .................................................................... 17
2.8 SPI flash ............................................................... 18
2.9 PWM .................................................................... 19
3.0 IDE to SD ............................................................. 20
C h a p t e r 3 Driver Installation……………………………………21
Appendix ………………………………………………………………..22
A. TCP/IP library for D S real mode ............................. 22
B. BI S Default Setting ................................................. 23
Warranty ............................................................................................ 24

This page is blank

VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
1
C h a p t e r 1
Introduction
1.1 Packing List
Product Name Package
VDX-6317RD-X
Embedded Vortex86DX C U All-in-One Board
Manual & Drivers CD x 1
RS232 cable x 1
IDE cable x 1
G IO cable x 1
S/2 Keyboard cable x 1
USB cable x 1 (Optional)

VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
2
1.2 Product Description
The VDX-6317RD-X family of low-power x86 embedded controller is designed to meet Tiny
specification, and integrated with the following features.
800MHz Vortex86DX System- n-Chip
256MB DDR2 system memory
Enhanced IDE (UltraDMA-100/66/33)
10/100Mbps Ethernet
1 USB 2.0 (host)
Up to 1 serial ports
16-bit GPI x1
x-ISA bus
2 watchdog timer
PWM 16 channels
JTAG interface
AMI BI S
4MB SPI flash
Single voltage +5V DC
Support extended operating
temperature range of -20°C to +70°C
The VDX-6317RD-X Tiny family of embedded controller is designed with backward compatibility
in mind, to provide migration path for projects facing end-of-life challenges with their existing x86
based Mity-Mite controller. The VDX-6317RD-X family of controller is designed as a plug in
replacement, with backward compatibility to support legacy software to help extend existing
product life cycle without heavy re-engineering.
VDX-6317RD-X is suitable for broad range of data-acquisition, Industrial automation, Process
control, Automotive controller, AVL, Intelligent Vehicle management devic,Medical device,
Human machine interface, Robotics, machinery control And more…application that required
small footprint, low-power and low-cost hardware with open industry standard such asTiny.

VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
3
1.3 Specifications
Features VDX-6317RD-X
CPU
DM&P SoC CPU Vortex86DX- 800MHz
Real Time Clock with Lithium Battery Backup
Cache
L1:16K I-Cache, 16K D-Cache L2:128KB Cache
BI S
AMI BIOS
Bus Interface
16-bit x-ISA interface
System Memory
256MB DDR2 Onboard
Watchdog Timer
Software programmable from 30.5 us to 512 seconds x2
sets(Watchdog 1 fully compatible with M6117D)
LAN
Integrated 10/100M Ethernet
I / Interface
Enhanced IDE port (UltraDMA-100/66/33) x1
RS-232 port x1
USB port x1 (USB 2.0 version)
16-bit GPIO port x1
10/100Mbps Ethernet port x1
Connectors
2.00 mm ∅44-pin box header for IDE x1
2.00 mm ∅20-pin box header for 16-bit GPIO x1
2.00 mm ∅10-pin box header for RS-232 x1
2.00 mm ∅4-pin header for USB x1
2.54 mm ∅5-pin header for keyboard x1
1.25mm ∅6-pin Wafer for JTAG x1
External RJ-45 connector for Ethernet x1
Flash Disk Support
Onboard 4MB SPI Flash Disk (Driver: A)
44-pin IDE Flash Disk( EmbedDisk 16MB or above)
44-pin IDE to Micro SD (Optional)
PWM
16~24 Channels
Power Requirement
Single Voltage +5V
@
380mA
Dimension
80mm X 50mm (3.14 x1.96 inches)
Weight
42g
perating
Temperature
-20
o
C ~ +70
o
C
-40°C ~ +85°C (Optional)

VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
4
1.4 Board Dimension

VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
5
C h a p t e r 2
Installation
2.1 Board Outline
Note
1. VGA, ICOP-2820, function support via x-ISA Interface
ICOP-2820:
http://www.icop.com.tw/en/product/Processor-Module-ICOP-2820/ICOP
-2820.html
2. 2.0MM 4-pin header USB cbale (P/N: USB(2.0)-1) is optional

VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
6
2.2 Connectors & Jumpers Location
Connectors

VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
7
Jumpers & LEDs

VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
8
2.3 Connectors & Jumpers Summary
Summary Table
Nbr Description Type of Connections
in nbrs.
J1 GPI (Port 0 / 1/ PWMx16) Box Header, 2.0∅ ,10x2 20-pin
J2 x-ISA Connector – 64 pin Box Header, 2.0∅, 32x2 64-pin
J3 PS/2 Keyboard Pin Header, 2,54∅,1x5 5-pin
J4 Power Connector Terminal Block 5.0∅,2x1 2-pin
J5 Buzzer Pin Header, 2,0∅,1x2 2-pin
J6 IDE Box Header, 2.0∅ ,22x2 44-pin
J7 C M1(TTL / PWMx8 ptional)
Box Header, 2.0∅ 5x2 10-pin
J9 Console Redirection Pin Header, 2.54∅ , 2x1 2-pin
J 1 USB Pin Header, 2,0∅,4x1 4-pin
J 2 JTAG Wafer, 1.25∅ , 6x1 6-pin
LAN 10/100Base-T Ethernet LAN RJ45 Connector 8-pin
WR-LED
Power Active LED (Red) LED-SMD
IDE- LED
IDE Active LED (Green ) LED-SMD
LED 2
LAN Duplex LED ( Yellow ) LED-SMD
LED 3
LAN Link/Active LED (Green)
LED-SMD

VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
9
2.4 Pin Assignments & Jumper Settings
J1: G IO ( ort 0 / 1/ WMx16)
J2: x-ISA Connector – 64pin
in # Signal Name
in #
Signal Name
1
GND
2
SBHE
3
RSTDRV
4
SD7
5
VCC
6
SD6
7
SD8
8
SD5
9
SD9
10
SD4
11
SD10
12
SD3
13
SD11
14
SD2
15
SD12
16
SD1
17
SD13
18
SD0
19
GND
20
I CHRDY
21
SMEMW
22
AEN
23
SMEMR
24
SA19
25
I W
26
SA18
27
I R
28
SA17
29
SD14
30
SA16
31
SD15
32
S
A15
33
MEMCS16
34
SA14
35
IC S16
36
SA13
37
REFRESH
38
SA12
in # Signal Name
in #
Signal Name
1 GND 2 VCC
3 GP00 4 GP10
5 GP01 6 GP11
7 GP02 8 GP12
9 GP03 10
GP13
11 GP04 12
GP14
13 GP05 14
GP15
15 GP06 16
GP16
17 GP07 18
GP17
19 VCC 20
GND

VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
10
39
SYSCLK
40
SA11
41
IRQ7
42
SA10
43
IRQ6
44
SA9
45
IRQ5
46
SA8
47
IRQ4
48
SA7
49
IRQ3
50
SA6
51
IRQ10
52
SA5
53
IRQ11
54
SA4
55
BALE
56
SA3
57
VCC
58
SA2
59
SC
60
SA1
61
GND
62
SA0
63
IRQ12
64
IRQ14
J3: S/2 Keyboard
in # Signal Name
in #
Signal Name
1
KBCLK
2
KBDAT
3
NC
4
G
ND
5
VCC
J4: ower Connector (Terminal Block 5.0mm)
in # Signal Name
1
+5V
2
GND

VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
11
J6: IDE (44 ins)
J7: COM 1 (TTL / WMx8 Optional)
in # Signal
Name
in # Signal
Name
1 DCD1
2 RXD1
3 TXD1
4 DTR1
5 GND 6 DSR1
7 RTS1
8 CTS1
9 RI1 10 NC
in # Signal Name
in #
Signal Name
1
IDERST
2
GND
3
IDED7
4
IDED8
5
IDED6
6
IDED9
7
IDED5
8
IDED10
9
IDED4
10
IDED11
11
IDED3
12
IDED12
13
IDED2
14
IDED13
15
IDED1
16
IDED14
17
IDED0
18
IDED15
19
GND
20
NC
21
IDEREQ
22
GND
23
IDEI W
24
GND
25
IDEI R
26
GND
27
ICHRDY
28
GND
29
ID
E
ACK
30
GND
31
IDEINT
32
NC
33
IDESA1
34
IDECBLID
35
IDESA0
36
IDESA2
37
IDECS
-
0
38
IDECS1
39
IDELED
40
GND
41
VCC
42
VCC
43
GND
44
NC

VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
12
J9: Console Redirection
in # Signal Name
in #
Signal Name
1 Console 2 GND
J 1: USB
in # Signal Name
in #
Signal Name
1
VCC
2
LUSBD
3
-
3
LUSBD
3
+
4
GND
J 2: JTAG
in # Signal Name
in #
Signal Name
1 VCC 2 GND
3 TCK 4 TD
5 TDI 6 TMS

VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
13
2.5 System Mapping

VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
14

VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
15

VDX-6317RD-X Vortex86DX Mity-Mite CPU Module
16
2.6 Watchdog Timer
There are two watchdog timers in Vortex86SX/DX CPU. ne is compatible with M6117D
watchdog timer and the other is new. The M6117D compatible watchdog timer is called WDT0
and new one is called WDT1.
We also provide D S, Linux and WinCE example for your reference. For more technical support,
please visit: http://www.dmp.com.tw/tech or download the PDF file:
http://www.dmp.com.tw/tech/vortex86dx/