ICP DAS USA iCAM-721F User manual

P.1
Packing List
iCAM-721F package includes the following items:
iCAM-721F
Accessory Tool Pack
Alignment Sticker
Software CD
Quick Start (This Document)












For Desktop Web
iCAM-721F Quick Start
v1.1, 05/2020
Technical Resources
How to search for drivers, manuals and spec information on ICP DAS website.
For Mobile Web
Technical Support
[email protected]
www.icpdas.com

P.2
1
Physical Connection
1) Be sure that your PC or Notebook has connected to your local
Ethernet network.
2) Be sure that IP Camera has connected to your local networking
via the Ethernet port (RJ45) on the cable. For this PoE model,
user can use PoE Switch as power supply.
3) Use CAM FINDER software utility in CD to set up the camera (see
the next page), or directly set up the camera via the Micro IE
browser using the following default IP information:
IP: 192.168.255.2
Submask: 255.255.0.0
Gateway address: 192.168.0.1
DNS Server address: 8.8.8.8
Default
Username: admin
Password: admin
PC/Notebook
iCAM-721F
①
②
PoE Switch
RJ45

P.3
2 CAM FINDER Installation
CAM FINDER software utility installation is required for finding out
your camera on local network that you can launch camera web
pages via Internet Browser or do some basically setting directly
without camera web pages.
CAM FINDER utility programs are located in the Software iCAM CD
provided together with the device. Please insert the CD into the PC
CD-ROM Drive, open the folder “Software_Utility” and then “CAM
FINDER”. Launch the CAM FINDER setup file “setup.exe”and
complete the installation step by step.
iCAM CD Path: \Software_Utility\Cam Finder\
The latest version of the CAM FINDER software program is available
on the iCAM product website, please see the page 1 of this Quick
Start.

P.4
3 Network Configuration
CAM FINDER is a utility that provides an easier, more efficient way to
configure the IP address and network settings of the devices. It even
provides a convenient way to set the network settings for multiple
devices simultaneously using the batch setting function. Moreover,
CAM FINDER can save the network settings for all devices as a backup
and restore them when necessary.
Double click the CAM FINDER icon on the
Desktop of PC to run the software.
Click the right key of
mouse on the gray
area and select the
[Language] can change
the software language
that supports for
[Traditional Chinese],
[English], [Spanish] and
[Simplified Chinese].

P.5
Using CAM FINDER to Assign an IP Address
1) Click the [Device Search] on the top of Window to search the
camera on the network.
2) From the list, select the device item with the MAC Address that
corresponds to the iCAM-721F that is to be configured.
3) Double click the item
to open the Property
Page or click right key
of mouse to the item
and select the [Single
Device Setting].
3
2
1

P.6
4) Modify the relative network settings of Static IP Address.
5) Click [Set]button to complete the property configuration settings.
4
5

P.7
Open the Web-based UI of the selected camera
1) To access the Web-based UI of the selected unit,
run the [Open Web] on the select item.
2) For first time user, there will be a prompt to install the
NETCAM VIEWER PLUG-IN. Click the hyper-link directly to
download. Before completing the installation, you should
close the browser first for PLUG-IN component installation.
After installation completed, re-launch the browser.

P.8
3) If the device has been configured correctly, the default Web
browser will open to the home page of the selected device.
* Username and password is required. (Default is admin / admin)