ICP DAS USA NS-205 User manual

NS-205 5-Port Switch - QuickStart (Feb/2016)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
1
NS-205
5-Port Industrial 10/100 Mbps Ethernet Switch
Quick Start Guide
Product Website:
http://www.icpdas-usa.com/ns_205_ethernet_switch.html
1. Introduction
The NS-205 has 5 Ethernet Switching ports that support 10/100Base-T(X),
with a 10/100M auto-negotiation feature and auto MDI/MDI-X function. It
can connect 5 workstations and automatically switches the transmission
speed (10 Mbps or 100 Mbps) for corresponding connections. The flow
control mechanism is also negotiated. LEDs embedded in RJ-45 jacks
make for easy monitoring. Port connectors are shielded RJ-45. A power
source for +10 ~ +30VDC is required.
Figure 1-1 NS-205

NS-205 5-Port Switch - QuickStart (Feb/2016)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
2
2. LED functions:
Standard RJ45 female connectors are provided. A standard RJ45 plug cable is all that
is necessary to connect your device to the unit since switch that supports auto
crossover. Table 1 shows the LED indicator functions. The module includes an internal.

NS-205 5-Port Switch - QuickStart (Feb/2016)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
3
3. Ethernet Wiring:
When making a connection to another device using straight-through UTP cable, make
sure
the MDI-X to MDI connection rule is followed. The following figure illustrates the pin
assignments of a straight-through UTP and a crossover UTP cable:
4. Checking Power:
Since the NS-205 consumes 2.4W, ensure that your power supply is able to meet this
demand. The Input voltage range is +10~+30VDC.
External power supply is connected using the removable terminal block as shown below: