ICP DAS USA NS-205AG User manual


NS‐205AG 5‐PortSwitch ‐QuickStart(Mar/2019)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
1

NS-205AG
Unmanaged 5-port Industrial 10/100/1000 Base-T
Ethernet Switch
Quick Start Guide
Product Website:
https://www.icpdas-usa.com/ns_205ag
1. Introduction
The NS-205G/NS-205AG is 5-port unmanaged gigabit switches that
support 10/100/1000 Base-T, with a 10/100/1000M auto negotiation feature
and auto MDI/MDI-X function. It can connect 5 workstations and
automatically switches the transmission speed (10 Mbps or 100 Mbps or
1000 Mbps) for corresponding connections.

Figure1‐1NS‐205AG



NS‐205AG 5‐PortSwitch ‐QuickStart(Mar/2019)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
2

2. LED functions:
Standard RJ45 female connectors are provided. A standard RJ45 plug cable is all that
is necessary to connect your device to the unit since switch that supports auto
crossover. Table 1 shows the LED indicator functions. The module includes an internal.




NS‐205AG 5‐PortSwitch ‐QuickStart(Mar/2019)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
3

3.Ethernet Wiring:
When making a connection to another device using straight-through UTP cable, make
sure
the MDI-X to MDI connection rule is followed. The following figure illustrates the pin
assignments of a straight-through UTP and a crossover UTP cable:
4.Checking Power:
The Input voltage range is +12~+48VDC.
External power supply is connected using the removable terminal block as shown below: