ICP Electronics LCD-Kit05A User manual

LCD-Kit05A
VGA Input LCD Kit of
12.1” TFT Color 800x600 – 18bits Display
©Copyright 2000 by ICP Electronics Inc. All Rights Reserved.
Manual first edition July 17, 2000.
The information in this document is subject to change without prior
notice in order to improve reliability, design and function and does
not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect,
special, incidental, or consequential damages arising out of the use
or inability to use the product or documentation, even if advised of
the possibility of such damages.
This document contains proprietary information protected by
copyright. All rights are reserved. No part of this manual may be
reproduced by any mechanical, electronic, or other means in any
form without prior written permission of the manufacturer.

LCD-Kit05A 1
Contents
1. Introduction ........................................................................ 2
1.1 Specifications.................................................................................. 3
1.2 What You Have............................................................................... 4
2. Installation.......................................................................... 5
2.1 LCD-Kit05A Connection Layout ...................................................... 6
2.2 Dimension Drawing......................................................................... 7
3. LCD-Kit05A Connectors .................................................... 8
3.1 LCD-05 Connection Board Layout .................................................. 8
3.1.1 LCD Connector ............................................................................... 9
3.1.2 Backlight Inverter Control.............................................................. 10
3.2 Backlight Connector...................................................................... 11
3.3 Touch Panel Power Connector ..................................................... 11
3.4 Brightness Setting Connector….................................................... 11
3.5 AV-6721 Control Board................................................................. 11
3. Appendix .......................................................................... 12
Unpacking Precautions
LCD-Kit05A 2
1
Introduction
Welcome to the LCD-Kit05A. The LCD-Kit05A is an Amorphous
Silicon TFT LCD panel with VGA input and OSD (On Screen
Display) control. It is made for the system manufacturers,
integrators, or VARs that want to provide all the performance,
quality and reliability.
The LCD-Kit05A is designed with 800 x 600 resolution and 18-
bits display colors, wide view angle, High Contrast and Low
Reflection to present a High Image Quality. With its compact size
(12.1”), LCD-Kit05A is also the most suitable solution for OA
Equipment, Display Terminals, and Industrial portable
Workstation LCD monitor.
The LCD-Kit05A comes with specifically designed mounting kit
for fast installation. It is also Plug and Play, can be directly and
easily connected to any VGA port.

LCD-Kit05A 3
1.1 Kit Specifications :
 Single Supply Voltage : +12V
 Outline Dimensions: 294.0mm (W) x 240.7mm (H) x 61.0mm (D)
 Panel Size: 12.1” Diagonal
 Active Area Size: 246.0mm x 184.5mm
 Viewing Area: 247.5mm x 186.0mm
 Display Colors: 256k Colors by the combinations of 18 bits data
 Number of Pixels: 800 (W) x 600 (H)
 Brightness : 250 cd/m2
 Pixel Pitch: 0.3075mm (H) x 0.3075mm (V)
 Viewing Angle: Vertical = 90o, Horizontal = 110o
 Contrast Ratio: 250 : 1
 Surface Treatment: Anti-glare and Hard Coat
 Backlight: Twin Cold-Cathode Fluorescent Lamps for sidelighting
 Operating Temperature : 0~50oC
 LCD MTBF : 50,000 hours
 Backlight MTBF : 25,000 hours (avr.)
 VGA Input
 OSD built
 RS232 I/F Touch Panel (option)
LCD-Kit05A 4
1.2 What You Have
In addition to this User's Manual, the LCD-Kit05A package
includes the following items:
 AC-6721 User’s Manual
 LCD-Kit05A User’s Manual
 Power adapter
 AC power cord
 VGA cable (1.8M)
If any of these items is missing or damaged, contact the dealer
from whom you purchased the product. Save the shipping
materials and carton in case you want to ship or store the product
in the future.

LCD-Kit05A 5
2
Installation
This chapter describes how to install the LCD-Kit05A and include
all connections description such as jumpers, connectors and
switches setting. The layout of LCD-Kit05A connectors are
shown on the next chapter. The reference manual of AV-6721
control board are separated on attached booklet. Also the
Unpacking Precautions are shown on appendix that you should
be careful with are described on the following page.
TO RS-232 (OPTION)
+12VDC INPUT
VGA
OSD (DOWN)
OSD (UP)
OSD (SELECT)
OSD (RETURN)
LCD-Kit05A 6
2.1 LCD-Kit05A Connection Layout
CN1
IV-16130
CN2
A26
AV6721
LCD-05
FP-2401
VGA INPUT
+12VDC INPUT

LCD-Kit05A 7
2.2 LCD-Kit05A Dimension Drawing
212.8 37.2
1.1 294
225
112.5
240.7
LCD-Kit05A 8
3
LCD-Kit05A Connectors
3.1 LCD-05 Connection Board Layout
CN2 CN3
CN1
CN6
CN5
CN4
LCD-05

LCD-Kit05A 9
3.1.1 LCD Connector
•CN1: 22x2 Header/2.0mm LCD Connector
(connect to LCD Control Card)
PIN NO FUNCTION PIN NO FUNCTION
1 +12V 2 +12V
3 GND 4 GND
5 +5V 6 +5V
7 FPVEE 8 GND
9 P0 10 P1
11 P2 12 P3
13 P4 14 P5
15 P6 16 P7
17 P8 18 P9
19 P10 20 P11
21 P12 22 P13
23 P14 24 P15
25 P16 26 P17
27 P18 28 P19
29 P20 30 P21
31 P22 32 P23
33 GND 34 GND
35 SHFCLK 36 FLM
37 M 38 LP
39 GND 40 ENBKL
41 GND 42 NC
43 +5V 44 +5V
LCD-Kit05A 10
•CN5: LCD OUTPUT (DF14-30P-1.25H) Connector
(connect to Panel Display)
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 GND 2 SHFCLK
3 NC 4 NC
5 GND 6 P18
7 P19 8 P20
9 P21 10 P22
11 P23 12 GND
13 P10 14 P11
15 P12 16 P13
17 P14 18 P15
19 GND 20 P2
21 P3 22 P4
23 P5 24 P6
25 P7 26 M
27 GND 28 +5V
29 +5V 30 GND
3.1.2 Backlight Inverter Control
•JP1: Backlight Inverter ON/OFF control - jumper
PIN NO. FUNCTION
1-2 USE FPVEE
2-3 USE ENBKL
3.2 Backlight Connector
•CN2: Backlight Inverter Connector
PIN NO. DESCRIPTION
1 Vin (+12V)
2 ON/OFF
3 GND
4 VR

LCD-Kit05A 11
•CN4: JST-2Pin/2.5mm Backlight Inverter ON/OFF Switch
PIN NO. DESCRIPTION
1 +12V
2 Vin
1-2 ON : Backlight Inverter ON
1-2 OFF : Backlight Inverter OFF
3.3 Touch Panel Power Connector
•CN3: Touch Panel Power Connector
PIN NO. DESCRIPTION
1 +12V
2 GND
3 GND
4 +5V
3.4 Brightness Setting Connector
•CN6: Brightness VR Connector
PIN NO. DESCRIPTION
1 Series Resistor to VCC
2 VR
3 GND
Note: Pin1 is reserved for potentiometer
3.5 AV-6721 Control Board
The AV-6721 Control Board is worked for VGA control;
all detail as feature and connection information please
refer to “AV-6721 User Manual”
LCD-Kit05A 12
Appendix
Unpacking Precautions
 Some components on LCD-Kit05A are very sensitive to static
electric charges and can be damaged by a sudden rush of power.
Ground yourself to remove any static charge before touching your
LCD-Kit05A. You can do it by using a grounded wrist strap at all
times or by frequently touching any conducting materials that is
connected to the ground.
 Do not touch the inner side of LCD panel and the connector/cable
of fluorescent lamp/backlight when the power is on. The inverter
supplies HIGH VOLTAGE to these parts (~ 630Vrms).
 Disconnect power supply before handling and doing connection
on LCD-Kit05A. Do not plug any connector or jumper while the
power is on. It will cause fatal damage to your LCD panel.
 Make sure that every connector is connected in correct direction.
Any incorrect connection may cause smoke or burn of electrical
parts or fatal damage of your LCD panel.
 Be careful with the liquid crystal material. Do not swallow, inhale
or have skin contact with this material in case that the LCD panel
is broken and the liquid flow out. If you inhale the liquid material,
rinse your mouth immediately with water then go to see a doctor.
If you have skin contact with the liquid, wash it immediately with
alcohol. Be careful, too, with the chips of glass if the panel is
broken.
 For outdoor usage, an ultra-violet ray protect-lens is
recommended to apply onto LCD display. It will prevent your LCD
from strong sun-light, scratches, dust and water invasion etc.
which can cause damage to the LCD display.