ICRealtime PTZ2300SIR User manual

IR Speed Dome User’s Manual
Version 1.1.1

i
Table of Contents
1FEATURES AND FUNCTIONS .................................................................................... 1
1.1 General Introduction...........................................................................................................................................1
1.2 Features ...............................................................................................................................................................1
1.2.1 On-Screen Menu............................................................................................................................................1
1.2.2 On-screen Tips...............................................................................................................................................1
1.2.3 Support multiple protocols ............................................................................................................................1
1.2.4 Proportional Pan and Tilt ..............................................................................................................................1
1.2.5 Preset Setup and Recall ...............................................................................................................................1
1.2.6 Auto Scan........................................................................................................................................................2
1.2.7 Auto Touring ...................................................................................................................................................2
1.2.8 Auto Pattern....................................................................................................................................................2
1.2.9 Privacy Masking .............................................................................................................................................2
1.2.10 IR Night Vision ...........................................................................................................................................2
1.2.11 Action on Alarm .........................................................................................................................................2
1.2.12 Auto Flip......................................................................................................................................................2
1.2.13 Self-diagnosis ............................................................................................................................................2
1.2.14 Day/Night Mode (B/W & Color Mode) ....................................................................................................2
1.2.15 Auto Focus .................................................................................................................................................2
1.2.16 Backlight Compensation ..........................................................................................................................3
1.2.17 Pan Tilt and Zoom.....................................................................................................................................3
1.2.18 3D Intelligent Location..............................................................................................................................3
1.2.19 Idle Status ..................................................................................................................................................3
1.2.20 Image Flip...................................................................................................................................................3
1.3 Specifications ......................................................................................................................................................3
1.3.1 Performance Specifications..........................................................................................................................3
1.3.2 Technical Specifications ...............................................................................................................................4
2PROTOCOL, BAUD RATE, ADDRESS SETUP........................................................... 6
2.1 Protocol and Baud Rate Setup .........................................................................................................................6
2.2 Set address dial switch ......................................................................................................................................7

ii
3CABLE CONNECTION.................................................................................................9
3.1 RS485 and Power Cable Connection..............................................................................................................9
3.2 Alarm Cable Connection...............................................................................................................................10
3.2.1 System Layout..............................................................................................................................................11
3.2.2 Alarm Connection ........................................................................................................................................12
3.2.3 Keyboard Connection..................................................................................................................................12
4MENU ......................................................................................................................... 14
4.1 Screen Menu Index.........................................................................................................................................14
4.2 Self-diagnosis System Information ................................................................................................................15
4.3 Main Menu .........................................................................................................................................................15
4.4 Menu Operation...............................................................................................................................................16
4.4.1 System Information......................................................................................................................................16
4.4.2 Display Setting .............................................................................................................................................17
4.4.3 Camera Setting ............................................................................................................................................18
4.4.4 Function Setting ...........................................................................................................................................21
4.4.5 IR Light Setup...............................................................................................................................................27
4.4.6 Alarm Setup ..................................................................................................................................................28
4.5 Dome Abnormal Phenomenon Operation................................................................................................29
4.5.1 Restore to Factory Default Setup ..............................................................................................................29
4.5.2 PTZ Movement is not smooth ....................................................................................................................29
5FAQ ............................................................................................................................ 30
5.1 Daily Maintenance..........................................................................................................................................30
5.2 Problems and Solutions...............................................................................................................................30
6APPENDIX Ⅰ THUNDER PROOF AND SURGE PROTECTION................................. 31
7APPENDIX Ⅱ ABOUT RS485 BUS............................................................................ 32

iii
7.1 RS485 Bus Main Feature ................................................................................................................................32
7.2 RS485 Bus Transmission Distance ...............................................................................................................32
7.3 Connection Methods and Terminal Resistance ...........................................................................................32
7.4 The Problem in Practical Use .........................................................................................................................32
7.5 RS485 Bus FAQ ...............................................................................................................................................33
8APPENDIX TOXIC OR HAZARDOUS MATERIALS OR ELEMENTS........................ 34

iv
Welcome
Thank you for purchasing our product!
This user’s manual is designed to be a reference tool for the operation of your system.
Here you can find information about this speed dome features and functions, as well as a detailed
menu tree.
Please keep it well for future reference!
Before installation and operation, please read the following safeguards and warnings carefully!

v
Important Safeguards and Warnings
1．Electrical safety
zAll installation and operation here should conform to your local electrical safety codes.
zThe power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the
Limited power source is rated 24V AC in the IEC60950-1.
zWe assume no liability or responsibility for all the fires or electrical shock caused by improper
handling or installation.
zWe are not liable for any problems caused by unauthorized modification or attempted repair.
2．Transportation Security
zNo heavy stress, violent vibration or water splash are allowed during transportation, storage and
installation.
zPlease use the original packing material (or the material of the same quality) when you ship it back
to the manufacturer.
3．Installation
zDo not apply power to the product before completing installation.
zDo not put object on the product.
4．Environment
zThis series product should be installed in a cool, dry place away from direct sunlight, inflammable,
explosive substances and etc.
zThe working temperature ranges from -30℃—60℃(Outdoor). Please keep it away from the
electromagnetic radiation object and environment.
zPlease keep the sound ventilation.
zDo not allow the water and other liquid falling into the device.
zPlease make sure the CCD (CMOS) component is out of the radiation of the laser beam device.
Otherwise it may result in CCD (CMOS) optical component damage.
5. Daily Maintenance
zCurrent series product has no power button. Please unplug all corresponding power cables before
your begin installation or daily maintenance work.
zPlease keep the dustproof cap back to protect the CCD or CMOS part if the device does not work
for a long time.
zDo not touch CCD (CMOS) component. You can use the blower to clean the dust on the surface of
the device. You can use the dry cloth with some alcohol or mild detergent to clear if necessary.
zDo not use the volatility solvent such as the benzene or thinner, or detergent with strong
abradibility. It may result in lens damage or it may adversely affect the device performance.
zIf there is too much dust, please use the water to dilute the mild detergent first and then use it to
clean the device. Finally use the dry cloth to clean the device

6
6. About Accessories
Always use all the accessories recommended by manufacturer.
Before installation, please open the package and check that all the components are included in the package:
Contact you local retailer ASAP if something is missing in your package.

1
1Features and Functions
1.1 General Introduction
This series IR speed dome product is an integrated high intelligent speed dome. It adopts water drop
configuration design and has small and delicate shape. This is a digital and intelligent product of vivid video.
It supports the auto IR light enable function in low illumination environments and the near and far light
intelligent control. The installation is convenient.
The IR speed dome external ports adopt the buckle device to realize the quick installation. There is
waterproof interface for the pipe thread. All of these make the installation easier. It supports various
languages, real-time clock function and protocol auto recognition. It supports 360° continuously pan, 92°tilt
and 180° auto flip. It can realize no blind spot monitor.
This series product can be widely used in remote monitor environments such as electric power, customs,
and water conservancy. It is suitable for the monitor environments of low illuminations such as the village,
town and suburb.
1.2 Features
This series speed dome has the following features:
1.2.1 On-Screen Menu
This series product menu supports multiple languages display and switch.
It is easy for you to view dome information and configure dome, camera parameters.
1.2.2 On-screen Tips
Here you can view:
zPreset name and system version (Software and hardware)
zDome system temperature. (Optional. You can disable this function)
zDome address. (Optional. You can disable this function)
1.2.3 Support multiple protocols
This series speed dome supports universally used protocols such as PELCO-P and PELCO-D. You can use
various devices (such as matrix, control keyboard and DVR) and protocols to operate speed dome.
1.2.4 Proportional Pan and Tilt
This function keeps the image from moving too fast when there is a large amount of zoom.
Speed dome continually decreases or increases pan and tilt speeds in proportion to depth of zoom. When
zooms speed is increasing, the camera moving speed becomes slow. When zooms speed is decreasing, the
camera moving speed becomes fast.
1.2.5 Preset Setup and Recall
Preset function is to save the address information (such as PTZ pan/tilt, focus and etc) to the memory so
that you can quickly adjust the dome and PTZ to the correct position. This series speed dome max supports
255 presets in PELCOD and PELCOP protocols. .

2
1.2.6 Auto Scan
Camera scans back and forth regularly in a horizontal field. Here you need to set left and right limit and scan
speed. You can set 5 scanning paths.
1.2.7 Auto Touring
Add addresses into a routine in a desired order and then set time and stop duration for each address. The
dome will begin an auto touring between these addresses. You can set 8 touring paths.
1.2.8 Auto Pattern
Memorize dome operation such as pan, tilt, and zoom to repeat. Focus and iris are in auto mode during auto
pattern. For each pattern, the time should be less than 60 seconds. You can set 5 pattern paths.
1.2.9 Privacy Masking
Privacy masking is a user-defined, four-sided area that can not be viewed by you. The masking area will
move with pan and tilt functions and automatically adjust in size as the lens zooms. You can set 8 privacy
masking zones (Depends on camera type).
1.2.10 IR Night Vision
In the night vision status, it can use the IR light to spot the monitor object, or you can monitor the
environments in the low illumination at night.
1.2.11 Action on Alarm
This series speed dome support three alarm activation operations. There are 7 alarm inputs (NO/NC).
Alarms can be individually programmed to initiate an associated preset, scanning, or tour when received.
Dome will return to a previously programmed state after alarm acknowledgement or to its previous position
before alarm.
1.2.12 Auto Flip
As long as you continue to hold the keyboard joystick in the down position, the dome rotates 180 degrees
and repositions itself for uninterrupted viewing of any subjects that passes directly beneath the dome.
1.2.13 Self-diagnosis
There is a self diagnosis procedure when dome boots up.
zTilt and vertical engine check
zCamera diagnostics
zDisplay dome information and diagnosis information such as address, protocol, baud rate, type.
1.2.14 Day/Night Mode (B/W & Color Mode)
System supports auto/manual switch in low illumination. You can specify the switch time.
zIn the auto mode and photosensitive resistance mode, the camera can automatically switch the
CCD level according to the light change. In the manual mode, it can use the menu or the button to
realize the color display, black and white display, and schedule switch. All the modes will have
automatically activation operation on the IR light except the camera auto mode.
zThis function works with the IR night vision function.
1.2.15 Auto Focus

3
Auto focus allows the lens to remain in focus during zoom-in, zoom-out and motion functions to get vivid
image. You can use FAR or NEAR button to adjust focus manually.
1.2.16 Backlight Compensation
Balance the brightest and darkest sections of a scene to produce a more vivid picture.
1.2.17 Pan Tilt and Zoom
Supports zoom in and zoom out during tilt and pan movement.
In this period focus and iris are both in auto mode to get vivid image.
1.2.18 3D Intelligent Location
Working with DVR, just click part of the current scene will be displayed in the central window and
automatically zooms. All of these allow you to trace precisely.
1.2.19 Idle Status
When there is no available order, you can use menu to set dome idle status after specified duration. The idle
status includes turn to specified preset or go to scan, tour or pattern function.
1.2.20 Image Flip
You can enable image flip in the menu.
The flip function allows you to view continuous video.
1.3 Specifications
1.3.1 Performance Specifications

4
1.3.2 Technical Specifications
Built-in
Decode
All digital design. All data are in the connection board. No data loss
when power off occurs.
zIntegrated design, high stability.
zIR speed dome max support 255 presets. Support 8 auto touring.
Each touring max has 32 presets.
z5 auto scan.
z5 auto pattern. Each pattern can max support 400 commands and
the interval shall be less than 60s.
zBuilt-in direction indicator.
zRS485 BUS control.
zSupport max 8 privacy mask zones(Depends on the camera type)
z7 alarm inputs and 2 alarm outputs.
zBuilt-in various adjustable protocols, baud rate.
Built-in PTZ
zFine stepper driver, stable performance, react quickly, precisely
positioning.
zIntegrated design, tight structure.
zElegant mechanical driver device. Support 360 degrees continuous
rotation, no monitor blind spot.
z0.1°/s rotation speed while maintain stable image.
z180 degrees tilt continuous monitor.
Built-in IR
light
zSupport zoom level has the higher priority (default), manual or the
height has the higher priority.
zIn the night vision status, it can use the IR light to spot the monitor
object, or you can monitor the environments in the low illumination
at night.
Built-in zoom
lens, high
sensitive,
high
resolution
integrated
digital
process
color
camera.
zAuto focus
zAuto iris control
zAuto brightness control
zAuto white balance
zAuto day/night switch (Auto B/W & color switch)
OSD
zPreset title display
zView dome initial setup information
zModify camera parameter
zSet preset
zSet auto scan
zSet 7 alarm inputs and 2 alarm outputs.
zSet auto patter
zSet auto day/night switch (Auto B/W & color switch)
zSet privacy mask zones

5
Power AC 24V/3A（±20%）(Includes temperature control circuit)
Camera Driver
Consumption 11W
IR Light Consumption ≤20W
Decoder Built-in
Engine Stepper motor
Preset 255( in PELCO protocol)
Auto Tour 8
Auto Pattern 5
Auto Scan 5
Privacy Mask Maximum 8 zones
Alarm Input/Output 7/2
Information Time, address, dome title, dome coordinates, temperature and
etc.
Lens Adjust speed in accordance with lens
Auto Rotation Tilt 92º auto rotates to pan 180 º
Auto Pan 0 º -360º continuously
Manual Pan Motion
Speed 0.1º—200º/S
Preset Maximum
Speed 60 º～240º/s. There are 16-level. You can set from the menu.
Manual Tilt Motion 0.1º—120º/S
Manual Tilt Scan
Section 0º—180º
Control Port RS485 BUS
Baud Rate 1200/2400/4800/9600 (Optional)
PTZ Scan Accuracy 0.06 ± 0.015º
Signal Format PAL/NTSC (Camera mode)
S/N Ratio > 50dB
Effective Pixel 752(H)x582(V)
768(H)x494(V)
976(H)x582(V)
976H)x494(V)
Horizontal Resolution 600TVL(Color),
650TVL(B/W)
700TVL(Color),
750TVL(B/W)
Fan Fan works continuously
Humidity ＜90%
Environment -30℃—60℃（Outdoor）

6
2Protocol, Baud Rate, Address setup
Before you operate, you need to set protocol, baud rate and address. Otherwise you can not control
the product!
2.1 Protocol and Baud Rate Setup
Please configure the following settings before begin controlling dome:
zProtocol
zBaud rate
zAddress
Note: Please reboot the speed dome to get all the setups activated!
Open the lower dome, the interface is shown as below. See Figure 2-1.
SW2 SW1
Figure 2-1
SW2
Figure 2-2

7
Please refer to the protocol sheets for detailed information.
Protocol Baud rate Parity 120ΩConnect to the 120Ω
1 2 3 4 5 6 7 8 ON
Please note the speed dome cans automatically recognize the DH-SD, PELCO-D. PELCO-P. Usually
you do not need to set.
1 2 3 Communication Protocol
OFF OFF OFF DH-SD （Compatible with China
industrial standard protocol）
ON OFF OFF PELCO-D
OFF ON OFF PELCO-P
X X X Reserved
Please refer to the baud rate sheet for detailed information.
4 5 Baud Rate
OFF OFF 9600bps
ON OFF 4800bps
OFF ON 2400bps
ON ON 1200bps
Please refer to the parity setup sheet for detailed information.
6 7 Parity
OFF OFF NONE
ON OFF
EVEN
OFF ON ODD
ON ON NONE
2.2 Set address dial switch
SW1
Figure 2-3
The encode mode adopts binary system. 1 to 8 is the valid bit. The highest address bit is 255. You can refer

8
to the following sheet for more information.
Address 1 2 3 4 5 6 7 8
1 OFF OFF OFF OFF OFF OFF OFF OFF
1 ON OFF OFF OFF OFF OFF OFF OFF
2 OFF ON OFF OFF OFF OFF OFF OFF
3 ON ON OFF OFF OFF OFF OFF OFF
4 OFF OFF ON OFF OFF OFF OFF OFF
5 ON OFF ON OFF OFF OFF OFF OFF
6 OFF ON ON OFF OFF OFF OFF OFF
7 ON ON ON OFF OFF OFF OFF OFF
8 OFF OFF OFF ON OFF OFF OFF OFF
…… …………………………………………………………………
254 OFF ON ON ON ON ON ON ON
255 ON ON ON ON ON ON ON ON

9
3Cable Connection
3.1 RS485 and Power Cable Connection
There are three cable groups: power cable, RS 485 cable and video cable. They are used to transmit video
signal, control signal and power connection. Please connect the power cable to the power socket of the
speed dome, connect the RS485 cable to the RS485 port of the speed dome. See Figure 3-1 and Figure 3-2.
Figure 3-1
Figure 3-2
Name Function
A 485-A. It is to control dome built-in PTZ.
B 485-B. It is to control dome built-in PTZ.
485
GND Ground.
OUT Reserved audio port. Audio output port.
Right now the device does not support this function.
GND Reserved audio port. Ground port audio.
Right now the device does not support this function.
AUDIO
IN Reserved audio port. Audio connection port.

10
Right now the device does not support this function.
GND Ground port.VIDEO
OUT Video output port.
Power port connection interface is shown as in Figure 3-3.
Figure 3-3
Name Function
AC24V 24V power port. Connect to the power cable.
EARTH Ground port.
AC24V 24V power port. Connect to power cable.
3.2 Alarm Cable Connection
Open the dome cover and take PTZ chip core out. Turn the core upside down; you can see the alarm port.
See Figure 3-4.
Figure 3-4
Name Function
Alarm out：1-2
zTwo alarm output channels. When there is an alarm from current
channel, system activates relay or not.
zAlarm output relay default setup is NO. You can use the jump-
cap near the power board relay to set.
zNO：Normal open alarm output.
zNC：Normal close alarm output.
GND Alarm input ground end.
Alarm in：1-7
zSeven alarm input channels. It is to receive relay signal from the
external alarm source. You can go to dome menu to activate
specified preset or patter.
zWhen the activation mode is NO (normal open), dome alarms
when there is low voltage. High voltage will not activate the
alarm.
zWhen the activation mode is NC (normal close), dome alarms

11
when there is high voltage. Low voltage will not activate the
alarm.
Note:
zDome alarm input message is ground mode.
zDome alarm input signal are two modes: normal open and
normal close.
3.2.1 System Layout
3.2.1.1 BUS connection
Please refer to Figure 3-5 and Figure 3-6 for BUS cable connection.
Figure 3-5
Figure 3-6
Note:
Please use shielded twisted pair. The shielded layer shall connect to GND firmly; otherwise it may affect
communication or video work.
3.2.1.2 Star Connection
Please refer to Figure 3-7 for start connection information.

12
Figure 3-7
3.2.2 Alarm Connection
Please refer to Figure 3-8 for alarm connection information.
Figure 3-8
3.2.3 Keyboard Connection
This series dome supports keyboard operation. You can use keyboard to control the dome and PTZ. The
display and control can work simultaneously. One keyboard can control maximum 255 speed domes.
Please refer to Figure 3-9.
Figure 3-9
This IR speed dome protocol is open and supports multiple popular system platforms in today’s market.

13
Please contact us freely if some matrix systems do not support dome camera communication protocol. The
most direct and easy way is to use current system to process video signal and add some control keyboards
to control speed dome. See Figure 3-10.
Figure 3-10