Icy Box IB-2280SSK User manual

IB-2280SSK
Manual IB-2280SSK
8bay 2.5" SATA/SAS HDD backplane
Handbuch IB-2280SSK
8Fach 2,5" SATA/SAS HDD backplane
Manuel IB-2280SSK
SATA/SAS Backplane pour 8 disques durs 2.5"

IB-2280SSK
1. Features
• 8x 2.5" SATA or SAS HDD/SSD in only 2x 5.25" bay
• Anti-Vibration Technology
• HDD´s up to 15mm heights
• Aluminum and Stainless Steel
• Alarm for overheating and fan failure
• SATA I/II/III host interface 6.0 Gbit/s
• With key lock to secure the HDDs
• LED for power, HDD access, Fan Alarm
• Ø 7 cm fan (2400 / 3000 rpm)
• Hot Swap
• 2x SATA Power Connector 15pin
• 8x Data Signal Connector 7pin
2. Packing Content
1x IB-2280SSK, 8x SATA cables, 2x keys, 24x screws, 1x short Manual
3. Product view
Front view Rear view
1. 1.2. 2.3. 2.4. 1.1. 3.2. 4. 6.
5.
1. HDD power LED (blue) & HDD access
LED (Purple blinking)
2. Triangle Safety lock
3. Fan Status LED (red for failure)
4. Temperature Status LED (red for failure)
1. 8x 7 Pin SATA data signal connector
2. 2x 15pin power connector
3. FAN speed switch high (3000 rpm) /
low (2400 rpm)
4. HDD LED switch (on/o)
5. External HDD access signal connector
6. External temperature & FAN failure
signal connector

IB-2280SSK
6. LED Function
HDD connected: LED 1. = blue
HDD access: LED 1. = pruple blinking
Fan failure: LED 3. = red
Temperature failure: LED 4. = red
7. Technical Data
HDD/SSD 8x 2.5" SATA/SAS HDD/SSD
HDD height 6 ~ 15 mm
Form factor 2x 5.25" bay
Dimension (WxHxD) 159x146x85 mm
Material Aluminum with anti-rust coating
HDD Interface support SATA I/II/III (6 Gbit/s)
SAS I/II (6 Gbit/s)
Weight 1.3 kg
Overheating temp. 60°C
Cooling fan 1x 7x7 cm / up to 3000rpm
8. Installation
1. Turn OFF the power to your computer and any other connected peripheral devices.
2. Unplug the power cord from the back of the computer and remove your computer‘s cover.
3. Put the Backplane in one free 2x 5.25" bay and x it with the screws.
4. Connect the 8x red SATA connectors to the referring connectors on the main board.
5. Connect the 2x internal Molex power cables to the power supply of your PC. Repla-
ce the computer cover and reconnect the power cord.

IB-2280SSK
Eigenschaften
• 8x 2,5" SATA oder SAS HDD/SSD in nur 2x 5,25" Einbauschacht
• Anti-Vibration Technology
• Festplatten bis 15 mm Höhe
• Gehäuse aus Aluminium und Metall
• Alarm für Übertemperatur und Lüfterfehler
• SATA I/II/III host interface bis zu 6.0 Gbit/s
• Festplattenträger ist abschließbar
• LED für Power, HDD-Zugri, Lüfteralarm
• Ø 7 cm Lüfter (2400 / 3000 rpm)
• Hot Swap
• 2x SATA Power Connector 15pin
• 8x Data Signal Connector 7pin
Installation
1. Schalten Sie Ihren Computer und alle angeschlossenen Geräte aus.
2. Entfernen Sie das Stromkabel an der Rückseite Ihres Computers und die Gehäuse-
abdeckung
3. Setzen Sie das Gerät in einen freien 2x 5,25" Einbauschacht und befestigen diesen
mit den entsprechenden Schrauben.
4. Verbinden Sie die internen roten 8x SATA Connectoren mit den entsprechenden
Anschlüssen auf dem Mainboard.
5. Verbinden Sie die internen Molex Stromkabel mit dem Netzteil des PCs.
6. Schließen Sie das Computergehäuse und verbinden das Stromkabel wieder.

IB-2280SSK
Caractéristiques
• 8x 2.5" disques durs SATA ou SAS dans deux baie 5,25"
• Anti-Vibration Technology
• Disques durs jusque á 15 mm
• Aluminium et métal
• Commande de ventilateur intelligent
• Interrupteur d‘alimentation indépendante
• Interface SATA I/II/III 6.0 Gbit/s
• Clé fournie pour la fermeture des racks
• Indicateur LED pour l’accès au DD
• Hot Swap
• Ø 7 cm ventilateur (2400 / 3000 rpm)
• 2x SATA Power Connector
• 8x Data Signal Connector 7pin
Installation
1. Débranchez votre ordinateur et tout périphérique connecté.
2. Débranchez le câble d’alimentation à l’arrière de l’ordinateur et retirez le couvercle
de votre ordinateur
3. Insérez le panneau dans deux baies 5,25" pouces disponible et xez-le à l’aide de vis.
4. Connectez les câbles internes SATA correspondants sur la carte mère.
5. Branchez les câbles d’alimentation Molex 4pins internes à la prise de courant de
votre PC.
6. Remettez le couvercle de l’ordinateur et rebranchez le câble d’alimentation.

© Copyright 2015 by RaidSonic Technology GmbH. All Rights Reserved
The information contained in this manual is believed to be accurate and reliable. RaidSonic Technology
GmbH assumes no responsibility for any errors contained in this manual. RaidSonic Technology GmbH reser-
ves the right to make changes in the specications and/or design of the above mentioned product without
prior notice. The diagrams contained in this manual may also not fully represent the product that you are
using and are there for illustration purposes only. RaidSonic Technology GmbH assumes no responsibility for
any dierences between the product mentioned in this manual and the product you may have.
www.icybox.de