Ideal Life Gluco-Manager ILP 0001 User manual

IDEAL LIFE Pod™
Communication Gateway (Access Point)
Model ILP0001
Products may vary from images shown
NOTE: The system is intended for information purposes only, for expert advice make sure to consult a healthcare
professional. Any instructions for change in treatment and health related information or advice should only be
made directly with a healthcare professional.
For use with devices from the IDEAL LIFE Health Management System™
INSTRUCTION MANUAL
Read before use
08 LP0001 CellPod manual v7.0 Jan 2015

208 LP0001 CellPod manual v7.0 Jan 2015
Table of Contents
TABLE OF CONTENTS.....................2
INTRODUCTION...............................3
PACKAGE CONTENTS.....................4
LOCATION/INTERFERENCE...........5
Your IDEAL LIFE Pod™......................6
Table of Contents
Connecting Your IDEAL LIFE
Cellular Pod™........................................7
SPECIFICATIONS .................................8
FCC STATEMENT..................................9
SERVICE REQUIREMENTS................10

3
Introduction
Preface
Thank you for purchasing the IDEAL LIFE Cellular Pod™, also called ILP 0001.This is an optional product
that is used together with your other IDEAL LIFE products. The Pod allows you to automatically send and
record information, to help you better manage your health with your health care provider. After
readings are taken, they are stored and the Pod transmits them so that they can be viewed online as
graphs and tables.
CAUTION:
Before using this product, read all instructions thoroughly.
For any questions or comments, please call IDEAL LIFE customer service toll-free at 1-866-IDEAL-41
(1-866-433-2541).
Introduction
08 LP0001 CellPod manual v7.0 Jan 2015

4 08 LP0001 CellPod manual v7.0 Jan 2015
Package Contents
Your System includes:
Package Contents
ILP 0001 IDEAL LIFE Cellular POD™
AC ADAPTER
INSTRUCTION MANUAL
RJ45 CABLE
-------------------------------------------------------------------------------------------------------------------------------------
Optional Accessory (may be included)

5
Location/Interference
The IDEAL LIFE Cellular Pod™ uses wireless radio waves to transfer information from your IDEAL LIFE
Manager™. For the best distance and least interference, the recommended IDEAL LIFE Cellular Pod™
location is:
•Away from electrical appliances such as a
TV, personal computer or a cordless phone
• In a HIGH and CENTRAL
location with no obstructions
such as walls
IDEAL LIFE Cellular Pod™ Location/Interference
08 LP0001 CellPod manual v7.0 Jan 2015

608 LP0001 CellPod manual v7.0 Jan 2015
Your IDEAL LIFE Pod™
Your IDEAL LIFE CellularPod
™
USB Port (notused)
LED Display
Internet Cable RJ45 Jack
Antenna attachment
AC adapter
jack

7
ConnectingYour IDEAL LIFE Cellular Pod™
USING CELLULAR INTERNET
Information may be transmitted using cellular Internet. Make sure Pod is Powered On. To do this, simply
connect the small end of the power supply into the power AC jack on the back of the IDEAL LIFE Cellular
Pod™ marked POWER. Plug the other end into an AC power outlet. Your IDEAL LIFE Cellular Pod™will
automatically power up once it is plugged in to an AC power outlet. Information from the IDEAL LIFE
Manager™ will automatically be uploaded to the IDEAL LIFE website.
USING AN RJ45 JACK
Another way to transmit information is using the Ethernet cord and the RJ45 jack.To do this, plug one end
of the Ethernet cord into a modular RJ45 wall jack.
Plug the other end of the Ethernet cord into the RJ45 jack on the back of
your IDEAL LIFE Pod™.
Connect the small end of the power supply into the power AC jack on the
back of the IDEAL LIFE Pod™marked POWER. Plug the other end into an
AC power outlet.
Your IDEAL LIFE Cellular Pod™ will automatically power up once it is
plugged in to an AC power outlet.
Connecting Your IDEAL LIFE Cellular Pod™
08 LP0001 CellPod manual v7.0 Jan 2015

808 LP0001 CellPod manual v7.0 Jan 2015
IDEAL LIFE Cellular Pod™
Model: ILP 0001 IDEAL LIFE Cellular Pod™
Connectivity: USB and Ethernet
Antenna: External
Operating System: Linux
Display: 4 LEDs + 4 Signal Strength Bars
Power Source: Class 2 Power Adapter 6.3V 1A
Operating Temperature/Humidity: 32 F - 131 F / Below 85% relative humidity
Storage temperature/Humidity: 0F - 185F / Below 90% relative humidity
Console weight: 5.11 oz
Outer dimensions: Approx. 4.72” Width x 1.32” Height x 4.29” Depth
Note:

9
FCC Statement
FCC Statement
08 LP0001 CellPod manual v7.0 Jan 2015
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
- Any changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate this equipment.
- This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your
body.

10
Service Requirements
Service Requirements
In the event of equipment malfunction, all repairs should be performed by our Company or an
authorized agent. It is the responsibility of the User to report the need for service to our Company or
authorized agent. Please refer to the original location of purchase for service details.
08 LP0001 CellPod manual v7.0 Jan 2015

IDEAL LIFE INC.
Customer Support Hours: Between 9:00 am and 8:00 pm (EST) Monday to Friday
Tel 1-866-IDEAL-41 1-866-433-2541 www.IDEALLIFEonline.com
At all other times, you should contact your healthcare professional for assistance.
© 2001 - 2015 IDEAL LIFE INC. All rights reserved. IDEAL LIFE is a registered trademark in the United States for
Manager, IDEAL LIFE BP-Manager, IDEAL LIFE Gluco-Manager, IDEAL LIFE Pod, IDEAL LIFE Step Manager,
IDEAL LIFE Breath Manager, IDEAL LIFE Direct Connect, IDEAL LIFE SpO2 Manager, IDEAL LIFE Medication
Manager, IDEAL LIFE Health Tablet, IDEAL LIFE Communication Enabler, Caregiver Relief, Your Gateway to
Health, Leveraging the Power of Communication, Reinventing Healthcare for an IDEAL LIFE, IDEAL LIFE Health
& Wellness Solution, are all proprietary trademarks of IDEAL LIFE INC. Contents are covered by issued U.S.
patents and one or more U.S. patents pending.
Manufactured for IDEAL LIFE INC., 2200 Yonge St., Suite 1300 Toronto, Ontario M4S 2C6 Canada. Made in China.
Products may vary from pictures shown.