iDevices IGRILL MINI User manual

User Manual

Table of Contents
In the Box 3
Quick Start Instructions 3
Getting Started 4
iDevices Connected App 4
Battery Replacement 5
Powering On & Off 5
Connecting 6
Disconnecting 6
Mounting 7
Probe Use 8
Probe Wrap Use 9
Using the iGrillmini 9
Smart LED 9
Proximity Sensor 10
Custom & Preset Alarms 10
Setting Up A Cook 11
Renaming Probes 12
Timer Tool 12
Globe Tool 13
Graph Tool 13
Problem Solving 13
Disclaimer 17
Regulations 17

3
In the Box
Inside your iGrillmini box, you will nd:
• 1 iGrillmini
• 1 Coin Cell Battery (Installed)
• 1 Meat Probe
• 1 Colored Probe Indicator (Red)
• 1 Probe Wrap
• 1 Optional Magnetic Disc
• Quick Start Guide
Quick Start Instructions
1. Download the iDevices®Connected app from the App StoreSM or
Google PlayTM store on one of the following compatible devices:
• iPhone®(4S and later).
• iPad®(3rd generation and later).
• iPad miniTM (all generations).
• iPod touch®(5th generation and later).
• Many AndroidTM devices equipped with Bluetooth®4.0 and
running Android software version 4.3 or later.
2. Enable Bluetooth on your smart device under ‘Settings’.
3. Separate the iGrillmini from its base by rmly holding the base with
one hand and gently pulling the iGrillmini top upwards with the other
hand.
4. On the underside of the iGrillmini, remove the battery door by
twisting it counter-clockwise. Remove the battery pull tab. Ensure
the battery is in place and replace the battery door.

4
5. Clip the iGrillmini top back into its base.
6. Plug the Meat Probe into the probe port of the iGrillmini.
7. Press the power button located at the center of the faceplate for
two seconds. The display will light up, indicating the iGrillmini has
powered on.
8. Open the iDevices Connected app to connect to your iGrillmini. Tap
on the iDevices logo in the gray toolbar at the top of the app. Select
your iGrillmini from the device manager.
9. You are ready to use your iGrillmini!
Getting Started
iDevices Connected App
The iDevices Connected app provides all of the functionality and
customization you’ll need to get the most out of your iGrillmini. The iDevices
Connected app is compatible with the following devices:
• iPhone (4S and later).
• iPad (3rd generation and later).
• iPad mini (all generations).
• iPod touch (5th generation and later).
• Many Android devices equipped with Bluetooth 4.0 and running
Android software version 4.3 or later.
You must be running iOS 7+ or Android version 4.3+ on your device to use
the iDevices Connected app. Please visit the App StoreSM or Google PlayTM
store and search “iDevices Connected” to download the free iDevices
Connected app.
Once you’ve downloaded the app, you’ll have access to links
for instructional videos, step-by-step instructions and FAQ’s for
troubleshooting.

5
Battery Replacement
To replace your iGrillmini battery, follow these steps:
• Separate the iGrillmini from its base by rmly holding the base with
one hand and gently pull the iGrillmini top upwards with the other
hand.
• On the underside of the iGrillmini, remove the battery door by
twisting it counter-clockwise.
• Replace the battery with a CR2032 coin cell battery (available at
local drugstores in the specialty battery section).
• Ensure the battery is in place and replace the battery door.
Powering On & Off
To turn on the iGrillmini, follow these steps:
• Press the power button located at the center of the faceplate.
• The Smart LED will blink blue while waiting for pairing.
To turn off the iGrillmini, follow these steps:
• Press and hold down the power button located in the center of the
faceplate for two seconds.
• The Smart LED will illuminate solid white and will then turn off.
Auto Shut-Off:
• The iGrillmini will stay powered on for ve minutes before
automatically turning off if there is no probe installed and it is not
paired to a smart device.
• The iGrillmini will stay powered on for eight hours before
automatically turning off if not paired to a smart device and the
probe is installed.
• The iGrillmini will stay powered on until the battery is depleted if it is
paired with a smart device, even if there is no probe installed.

6
Connecting
To connect your iGrillmini to your iPhone, iPad, iPod touch or Android device
follow these steps:
• Open Settings.
• Tap Bluetooth.
• Set Bluetooth to On.
• While turned on, place your iGrillmini next to your smart device
and open the iDevices Connected app. Your smart device will
automatically recognize any available iDevices products and display
them in the device manager. You can view your device manager by
tapping the iDevices logo at the top of the app.
• Select your iGrillmini from the device manager. You will then be sent
a pairing request. Once you accept, your smart device will pair with
the iGrillmini and you are ready to congure your settings and start
cooking!
To connect an additional iGrillmini (or other iDevices product) to your
iPhone, iPad, iPod touch or Android device follow these steps:
• While turned on, place your iGrillmini (or other iDevices product) next
to your smart device and open the iDevices Connected app.
• Tap on the gray bar located at the top of the screen to expose the
device manager. Select the product you would like to pair with from
the device manager. Your smart device will display a pairing request.
Once accepted, your smart device will pair with the additional
product and you are ready to congure your settings and start
cooking!
Disconnecting
To disconnect your iGrillmini device (or other iDevices product) to your
iPhone, iPad, iPod Touch or Android device, follow these steps:
• While turned on, place your iGrillmini next to your smart device
and open the iDevices Connected app. Your smart device will
automatically recognize any available and previously connected
iDevices products. You can display them in the device manager by

7
tapping the 3 dots at the top right hand of the screen.
• If your iGrillmini is connected, it will be listed under “Connected
Devices”.
• You can swipe to the left on the product name (i.e. iGrillmini) to
expose the “Disconnect” option.
• Tap “Disconnect”.
Mounting
• The base of the iGrillmini is magnetic for convenient positioning on a
cool portion of your grill, smoker or other magnetic surfaces.
• The iGrillmini can be taken out of its base, rotated 180° and set back
into its base for two different viewing angles.
• The iGrillmini comes with an optional magnetic disc with an adhesive
on one side. This allows the iGrillmini to magnetically mount on a
non-magnetic surface. The magnetic disc has a protective cover on
its face to protect it from being scratched.
To mount your magnetic disc, please follow the below steps:
• Clean the surface thoroughly where the magnetic disc will be
adhered to ensure proper bonding.
• Remove the protective lm covering the adhesive on the
magnetic disc.
• Adhere the magnetic disc to your desired surface.
• Let the magnetic disc bond to the surface for at least 6-12 hours
before mounting your iGrillmini to the disc.
• Place your iGrillmini on the magnetic disc.
The magnetic base is not designed to withstand high heat
and it must be placed on a cool surface. If the surface is too
hot to touch, it is too hot for the iGrillmini base!

8
Probe Use
• Meat Probes should always be inserted into the center of the item
being cooked for an accurate temperature reading.
• When using the included Standard Meat Probe, be sure to route the
probe wire where it will not be exposed to ames or temperatures
exceeding 572°F (300°C). Probes should avoid temperatures below
-22°F (-30°C).
• When using Pro-Series Meat Probes (sold separately), be sure
to route the probe wire where it will not be exposed to ames
or temperatures exceeding 620°F (326°C). Probes should avoid
temperatures below -22°F (-30°C).
• The Pro-Series Ambient Probe (sold separately) should be clipped
between two grates inside your grill, smoker or oven. Ensure the tip
of the probe does not touch the grates. Also, be sure to route the
probe wire where it will not be exposed to ames or temperatures
exceeding 620°F (326°C), and avoid temperatures below -22°F
(-30°C).
• The included Probe Wraps allow for convenient storage of your
probes and are magnetic so that they can be stored under your
iGrillmini when not in use.
The colored probe indicator is for visual identication of the
probe within the app and cosmetic purposes only. It is not
designed for heat safety.
The probe should be cleaned by hand with a dishcloth,
standard dishwashing soap and warm water. The probe is
not dishwasher safe. Take precaution not to get the probe’s
wiring wet.
Be sure to avoid water exposure to the probes’ wiring as
well as the area where the probes’ wiring meets the probe.
The probe is not waterproof and damage may result from
water exposure. The probe should never be submersed in
water.

9
Temperatures below -22°F or above 572°F (-30ºC or above
300ºC) will not display in the iDevices Connected app and
will cause the probe to disappear from connection.
Probe Wrap Use
To wrap your probe:
• Hold the probe wrap so that the clip segment is on the bottom left
and the iDevices logo is legible in the center of the probe wrap.
• Snap the probe into the probe wrap’s clip, ensuring that the probe’s
body follows the contour of the probe wrap and leaves a ½ inch gap
between the probe and the wire channel of the probe wrap. The tip
of the probe should be pointed downward.
• Wrap your probe’s wire clockwise around the probe wrap.
• When you reach the adapter end of the probe wire, it can be
inserted into the probe wrap’s wire channel to secure the wrapping.
Using the iGrillmini
Smart LED
The Smart LED allows the iGrillmini to display the connected probe
temperature reading through the use of color. Below is a list of all of the
light combinations you will see on the Smart LED and their associated
meanings:
Connection
• Solid White: Powering off or reset complete.
• Solid Blue: Conrms pairing of new device.
• Blinking Blue: Awaiting pairing or no alarm set.

10
Peak Preset
• Solid Green: Initial temperature.
• Solid Yellow: Target temperature is 15° F away.
• Solid Orange: Target temperature is 5° F away.
• Blinking Red: Target temperature reached.
• Solid Red: Target temperature reached and alarm acknowledged.
Range Preset
• Solid Green: Temperature inside range.
• Blinking Red: Temperature outside range.
Proximity Sensor
The use of Bluetooth Smart allows the iGrillmini to sense when a paired
smart device moves in or out of range. The iGrillmini will automatically wake
and sleep at the below distances to conserve power:
• Sleep ~ 30 feet away.
• Wake ~ 5 feet away.
*Proximity function based on Bluetooth signal strength. Signal strength
is inuenced by a number of factors including the smart device
and environment.
Custom & Preset Alarms
Manage iPhone, iPad or iPod touch alarms:
If you are having issues hearing the alarms from the iDevices Connected
app, try these steps.
• Open Settings on your iOS device.
• Tap “Notication Center”.
• Under the “Include” section, locate and tap “iDevices”.
• Enable “Notications” and “Sounds”.

11
Manage Android device alarms:
• Open Settings on your device.
• Find “Apps” and search for the iDevices Connected app (This could
be located in your “Application Manager”).
• Make sure notications are enabled.
Make sure the volume setting for your smart device is
properly set and your device’s vibrate switch is not enabled.
If your sounds are off or set at a low setting, you may not
hear the alarm properly.
Setting Up A Cook
The iDevices Connected app offers preset alarms for many types of meats
and cooking temperatures. Tapping a preset alarm will set it. You can also
create your own custom preset alarm for any desired temperature. There
are two different types of presets:
• Peak: Will sound when probe temperature reaches set peak
temperature.
• Range: Will sound when probe temperature is above the high
temperature or below the low temperature.
Preset Alarms for Different Types of Meats
Included in the app are preset temperatures that allow you to “Select Your
Doneness” of your meat.
• Tap “Set Up Cook” to the right of a connected probe’s running
temperature.
• This will bring you to the “Set” cook screen, where you can choose
the type of meat you are cooking.
• Once the meat is selected, you can “Select Your Doneness”.

12
• You will be brought to the “Start Cooking” screen. Here you can
“Customize” your Probe Name or Color, to reect on your probe
dashboard. You can also choose your preferred “Probe View”.
• Tap “Start Cooking” on the top of the screen!
Pre-Alarm Notication
• Within the iGrillmini Device Probe screen (iGrillmini named on top of
the screen), tap “More” located on the bottom of the screen.
• Tap “Settings”.
• Towards the bottom of the page, you will see “Pre-Alarm”.
Tap the “>”.
• Here you will be able to turn on or off this notication and set the
desired “Pre-Alarm” temperature.
• Once you have selected your options, tap “Save” in the top right
hand corner of the screen to conrm.
Pre-Alarm Notication: Receive a notication/alarm when
your food is getting close to its nal desired temperature.
Default Pre-Alarm is 10 degrees away, this can be set to 5°,
10°, 15° and 20° in your device settings. This feature is on
the ‘iDevices Connected’ app version 1.6 and higher.
You can acknowledge the alarm from the app or by pressing
< or > on the iGrillmini.
Renaming Probes
A probe can be renamed by tapping on the “Probe #” to the left of the
running temperature, then:
• Naming your probe under “Probe Name”.
• Choose a probe color from the “Probe Color Indicator” if needed.
• Tap “Save” when done.

13
Timer Tool
The timer tool allows users to set up timers. An alert will appear when the
timer runs out.
Create a new timer:
• Under “More” located at the bottom of the screen, tap “Timers”.
• Tap “Create New” to create a new timer.
• Add a timer title.
• Set desired time length using scroll wheels.
• Tap “Save” in the top right corner of the app. Start the timer by
sliding it on in the Timers menu.
Globe Tool
The globe tool will show other users of the iDevices Connected app.
Tapping on a pin will display a user-posted message and picture*. Take a
look at what other cooks around the world have made to ignite ideas for
your next cooking adventure!
* You will only show up on the Globe if you share via Facebook.
Graph Tool
The iDevices Connected app’s Graph Tool illustrates the temperature
progression over time for your probe as you cook.
Tap on the graph to get a more detailed look of your cook. Below the
graph, tap “More”. You will see options to export the graph as a CSV le
or clear the history of the graph.
Clearing the history of the graph removes all data related to your cook.
Problem Solving
The following information covers some of the most common
troubleshooting issues with the iGrillmini. If you need further assistance,

14
please review the iGrillmini FAQ page at http://idevicesinc.com/support
or contact a member of our Customer Experience Team by emailing
[email protected] or call toll free at [phone].
My iGrillmini won’t turn on.
If your iGrillmini is brand new, please be sure to remove the plastic tab
located in the battery compartment so that the battery can come into
contact with the power terminals. If this does not resolve the issue or if
your iGrillmini is not brand new, please try replacing the battery with a single
brand new CR2032 coin cell battery (available at local drugstores in the
specialty battery section).
If you are still unable to turn on your iGrillmini , please contact our Customer
Experience Team for further assistance by emailing support@idevicesinc.
com or call toll free at [phone].
I’m having difculty pairing my iGrillmini with my smart device.
iPhone, iPad or iPod touch:
If the iGrillmini appears in your Bluetooth settings with the status “Not
Connected”, follow these steps from your Bluetooth settings menu:
• Tap the blue (i) to the right of the iGrillmini device name.
• Select the option “Forget this Device”.
• Turn Bluetooth OFF on your smart device.
• Completely shut down your smart device.
• Separate the iGrillmini from its base by rmly holding the base with
one hand and gently pull the iGrillmini top upwards with the other
hand.
• While still powered on, remove the iGrillmini battery cover and press
the reset button down with a pin until the light ring illuminates
white.
• Replace the battery cover, ensuring the battery is in place.
• Power up your smart device and turn Bluetooth back on.

15
• Tap on the iDevices logo in the gray toolbar at the top of the app.
Select your iGrillmini from the device manager. Your smart device will
pair with the iGrillmini and you are ready to congure your settings
and start cooking!
Android device:
If the iGrillmini device appears in your Bluetooth settings but is not showing
in the iDevices Connected app, follow these steps from your Bluetooth
settings menu:
• Tap on the icon to the right of the device and tap “unpair”.
• Turn Bluetooth OFF on your smart device.
• Completely shut down your smart device.
• Separate the iGrillmini from its base by rmly holding the base with
one hand and gently pulling the iGrillmini upwards with the other
hand.
• While still powered on, depress and remove the iGrillmini battery
door, press the reset button down with a pin for 5 seconds and
replace the battery door.
• Power up your device and turn Bluetooth back on.
• Click on the iDevices logo in the gray toolbar at the top of the app.
Select your iGrillmini from the dropdown menu. Your device will pair
with the iGrillmini and you are ready to congure your settings and
start cooking!
If you are having intermittent Bluetooth issues with your Android device
and want to restart Bluetooth from the app:
• Tap “More” located at the bottom of the app.
• Tap “Support”.
• Tap “Restart Android Bluetooth” and “Restart” when prompted
Bluetooth will restart on your Android device and you will have the
ability to pair.
If you do not see the iGrillmini device in your Bluetooth settings, please
ensure that you are using the iDevices Connected app since the paring

16
and connection of the iGrillmini are handled by the app. If you experience
further problems, please contact our Customer Experience Team for further
assistance.
I’m experiencing a problem with the iDevices Connected app for
my iPhone, iPad or iPod touch.
The iDevices Connected app requires iOS 7.0 or higher to operate.
If you are experiencing a problem with the iDevices Connected app,
please try following the steps below to resolve any potential problems on
the device-side:
• Make sure the iGrillmini is paired with your smart device via Bluetooth
and a temperature probe is plugged into the unit.
• Tap the Home button on the smart device.
• From the Home screen, double tap the Home button again. This will
zoom out of the home screen and display any/all previously running
apps on your smart device.
• Swipe to locate the “iDevices Connected” app.
• Swipe the “iDevices Connected” app image upward to close the
existing session.
• Tap the Home button on your smart device to close the Multitasking
Bar.
• Re-open the iDevices Connected app by tapping the app icon on
the Home screen.
I’m experiencing issues with the iDevices Connected app for my
Android device.
The iDevices Connected app requires Android version 4.3 or higher to
operate.
If you are experiencing a problem with the iDevices Connected app for
Android, please try following the steps below to resolve any potential
problems on the device-side.
• Make sure the iGrillmini is paired with your Android device via
Bluetooth and a temperature probe is plugged into the unit.

17
• Go to your app manager and quit out of the iDevices Connected
app.
• Re-open the iDevices Connected app by tapping the app icon.
If you are still experiencing a problem after completing these steps, please
contact our Customer Experience Team for further assistance.
I don’t have a device with which to pair my iGrillmini, can I still
use it?
No, the iGrillmini does not have a screen to display its temperature readings
and requires the use of the iDevices Connected app and a compatible
Bluetooth Smart device.
Disclaimer
The appliance is not to be used by children or persons with reduced
physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction.
Children should be supervised and instructed not to play with the
appliance.
For detailed instructions regarding the iDevices Connected app, please
download the iDevices Connected app User Manual from the iDevices
website www.idevicesinc.com.
Regulations
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
cause undesired operation.
INFORMATION TO USER:
This equipment has been tested and found to comply with the limits for a

18
Class B digital device, pursuant to Part 15 of FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate
radio frequency energy. If not installed and used in accordance with the
instructions, it may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try and correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the distance between the equipment and the receiver
• Connect the equipment to outlet on a circuit different from that to
which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.
Canada – Industry Canada (IC)
This device complies with Industry Canada license-exempt RSS Standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired
operation of the device.
Cet appareil est conforme avec Industrie Canada exempts de licence
standard RSS (s). Son fonctionnement est soumis aux deux conditions
suivantes:
(1) cet appareil ne doit pas provoquer d’interférences et (2) cet appareil
doit accepter toute interference, y compris celles pouvant causer un
mauvais fonctionnement de l’appereil.