Idis TC-D1212R User manual

HD-TVI
Camera
User Manual
IDIS Co., Ltd.
For more information, please visit at
www.idisglobal.com

CAMERA INSTALLATION
- 1 -
1. TC-B1202

CAMERA INSTALLATION
- 2 -
2. TC-D1212R

CAMERA INSTALLATION
- 3 -
3. TC-D1222R

CAMERA INSTALLATION
- 4 -
4. TC-D1222WR

CAMERA INSTALLATION
- 5 -
5. TC-E1212WR

CAMERA INSTALLATION
- 6 -
6. TC-T1222WR

- 7 -
BOX CAMERA INSTALLATION GUIDE
CABLE INSTALLATION GUIDE
1. Power : If camera power is on properly, red signal is turn on.
2. Video : Analog Video Signal Output
3. TVI : HD-TVI Signal Output
4. Power : Connect DC 12V Properly
5. RS-485 : Use RS-485 Protocol
6. Day & Night : Select Day & Night Function by External Signal
7. Motion Detection : Motion Detection Output
Black Video Cable : HD-TVI Video Output
Yellow Video Cable : Analog Video Output
Red Cable : Power Input (DC 12V)

- 8 -
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
The lightning flash with an arrowhead symbol, within an
equilateral triangle is intended to alert the user to the presence
of uninsulated dangerous voltage within the product's enclosure
that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance(servicing) instructions in the literature
accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
WARNING - Changes or modifications not expressly approved by
the manufacturer could void the user’s authority to operate the
equipment.
This installation should be made by a qualified service person and
should conform to all local codes.
CAUTION : To prevent electric shock and risk of fire hazards:
☞Do NOT use power sources other than those specified.
☞Do NOT expose this appliance to rain or moisture.
6\PERO 3XEOLFDWLRQ
IEC60417, No.5031 'LUHFW&XUUHQW
'HVFULSWLRQ

- 9 -
Contents
30
36
Specifications
Trouble Shooting
Menu Set Up
▶Set Up Menu
▶Menu Set Up
▶Lens
▶Exposure
▶ White Bal
▶Backlight
▶DNR
▶ Day&Night
▶Image
▶Motion
▶System
▶Exit
13
16
17
18
19
21
23
23
25
27
28
29
Contents 9
10
General Features
11
Precautions
12
Safety Instructions
13

- 10 -
General Features
●
Transfer Video Interface
The combination of a 2Mega CMOS image sensor and TVI DSP provides an
excellent resolution of TVI picture.
●
3D-DNR
Smart 3DNR prevents the image blurring of moving object and activates only if
moving objects are appearing on the scene.
●
Smart-IR
No saturation image, vivid image in darkness! "TVI" camera makes very sharp
video image in darkness! This technology eliminates saturation of video image
of the closer object in darkness by control of the IR sensitivity. Saturation never
happens in our "TVI"cameras, you can enjoy vivid image in any dark condition!
●
Sens-Up
Despite a limited & low light condition, Sens-Up - Max. x32 helps the viewer to
get visible and clear images.
●
Defog
Defog function improve the clarity of images taken in poor conditions such as fog,
smoke, rain or snow.
●
WDR
A powerful and advanced technology that captures clean and superior high
resolution picture even where images appear dark and strong back light.
●
CVBS(Composite Video Blanking and Sync)
TV system is switchable 'NTSC' or 'PAL' with built-in OSD.
●
Intelligent Function
An extra ordinary technology enables HD-TVI become an ultimate and of solution
by providing intelligent features based on motion detection. It strengthens crime
prevention and detection.

- 11 -
Do not install the camera in
extreme temperature conditions.
Do not touch the front lens of the
camera.
Do not expose the camera to rain
or spill liquids on it.
Do not install or use the camera in an
environment where the humidity is
high.
Do not install or use the camera in an
environment where the humidity is high.
Never keep the camera pointed
directly at strong light.
Do not expose the camera to
radioactivity.
Do not install the camera under
unstable lighting conditions.
Do not drop the camera or subject
it to physical shocks.
Only use the camera under conditions
where temperatures are between
-10°C and +50°C. Be especially careful
to provide ventilation when operating
under high temperatures.
This is one of the most important parts
of the camera. Be careful not to leave
fingerprints on the lens cover.
If it gets wet, wipe dry immediately.
Liquids can contain minerals that
corrode the electronic components.
It can cause malfunctions to occur.
If exposed to radioactivity the CCD
will fail.
Severe lighting change or flicker can
cause the camera to work improperly.
NOTE
* If the camera is exposed to
spotlight or object reflecting
strong light, smear or blooming
may occur.
* please check that the power
satisfies the normal specification
before connecting the camera.
Precautions

- 12 -
Safety Instructions
Precautions for use
Please handle this camera carefully :
◑ This camera should be installed by qualied personnel only
◑ There are no user serviceable parts inside
◑Do not disassemble this camera other than to make initial adjustments
◑
Use appropriate low voltage power cable to prevent re or electrical shock
◑
Please insure that your installation area can support the weight of the camera
◑ Do not use a strong or abrasive detergent when cleaning the camera
◑ Do not expose the camera to direct sunlight
◑ Do not install camera in places where humidity is high
◑ Do not install near cooling or heating device
◑
Do not expose camera to rain or moisture

- 13 -
●
Setup Menu
How to Set Up the camera menu
02'(
5(7851
02'(
5(7851
%5,*+71(66
$872
63((' a
6(1683
$*&
5(7851
$872
$:%
$:&6(7
.(/9,1
5*$,1
%*$,1
2))
/(9(/
02'(
5(7851
+326
9326
+6,=(
96,=(
5(7851
:(,*+7
'152))/2:0,''/(+,*+
:'5 /2:0,''/(+,*+
%$&./,*+7
a
0$18$/
/2:0,''/(+,*+
a
a
5(7851
+/&
5(7851
a
a
a%/&
$//'$<1,*+721/<
(;32685(
a
:+,7(%$/
1250$/'(%/85
2))a;
a
0$18$/
,1'225287'225'(%/85
5(7851
6+877(5
a
/'07
57$/'07 57$/'07 57$/'07 57$/'07
/(16
'&
0$18$/
)/,&.(5

- 14 -
●
Setup Menu
How to Set Up the camera menu
&2/25
60$57,5
60$57,5
(;7(516:
'(/$<
(;7(51
5(7851
'$<1,*+7
/2:+,*+
a
a
%:
/2:0,''/(+,*+
5(7851
=21(180 a
=21(',63212))
+326a
9326a
+6,=( a
96,=( a
</(9(/a
&5/(9(/ a
&%/(9(/ a
35,9$&<
5(7851
2))
5(7851
21
6+$531(66
*$00$
&2/25*$,1
0,5525
)/,3
'=220
$&(
02'( $8720$18$/
/(9(//2:0,''/(+,*+
:(,*+7 a
21
'()2*
2))
21
6+$',1*
212))
212))
;a;
a
5(7851
5(7851
/2:0,''/(+,*+
2))
,0$*(
a
a

- 15 -
●
Setup Menu
How to Set Up the camera menu
2))
6(16,7,9,7<
'&02'(
:,1'2:721(
:,1'2:86(
'(7+326
'(79326
'(7+6,=(
'(796,=(
5(7851
&$0,'
%$8'5$7(
2))6(7 a
28738702'(
&2/2563$&(
)5$0(5$7(
&9%6
/$1*8$*(
&2/25%$5
5(6(7
5(7851
(;,7
,0$*(5$1*(
33&5233
a
a
a
a
86(5 5(7851
)8//
&203
21
<896'&%&5+'&%&5
2))21
a
a
a
)36)36
027,21
6<67(0
&20
2))21
+'(/$< 2))21
21
3$/176&
a

5(7851
(1*&+1&+16-31.25
60$57,5
$*&7+5(6
$*&0$5*,1
'(/$<
'$<1,*+7
7&%PRGHOFDQRQO\VHOHFWDXWRPHQX2WKHUVDUHQRWDYDLODEOH
a
a
a$872
/2:0,''/(+,*+
5(7851

- 16 -
Menu setting can be selected by the button inside the camera.
1. Press the set button.
* The Set Up menu will be displayed on the monitor.
2. Move and select the required function using the Up and Down button.
* Move the triangular indicator Up or Down to select the desired feature by pressing the Up or
Down button.
Menu Set Up
MENU
MENU
1.LENS
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.DNR
6.DAY&NIGHT
7.IMAGE
8.MOTION
9.SYSTEM
10.EXIT
1.LENS
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.DNR
6.DAY&NIGHT
7.IMAGE
8.MOTION
9.SYSTEM
10.EXIT
DCAUTO
AUTO
OFF
OFF
AUTO
OFF
DCAUTO
AUTO
OFF
OFF
AUTO
OFF

- 17 -
3. Change menu settings using the Left or Right button.
* Available values or Status are displayed by pressing the Left or Right buttons.
Press the button until desired value / status is displayed.
4. After Changing the setting move the arrow indicator to EXIT and press the SET button to
EXIT.
1. Move the triangular indicator to LENS using the Up and Down buttons on the Set Up menu
screen.
2. Select the desired lens type by pressing the Left of Right button.
NOTE
* Move to the available submenu by moving arrow to desired feature.
LENS
MENU
1.LENS
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.DNR
6.DAY&NIGHT
7.IMAGE
8.MOTION
9.SYSTEM
10.EXIT
DCAUTO
AUTO
OFF
OFF
AUTO
OFF

- 18 -
1. On the Set Up menu, Select EXPOSURE by using the Up or Down button.
EXPOSURE
NOTE
* When you select the mode setup, you can select INDOOR, OUTDOOR or DEBLUR
depending on the installation environment.
*On manual mode, you can select NORMAL or DEBLUR depending on the installation
environment.
MODE
MODE
RETURN
INDOOR
RET
2. Select the desired shutter mode by pressing the Left or Right button.
EXPOSURE
BRIGHTNESS
SHUTTER
SENSE-UP
AGC
RETURN
IIIIIIIIIIIIIIIIIII| 20
AUTO
OFF
IIIIIIIIIIIIIIIIIII| 20
MENU
1.LENS
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.DNR
6.DAY&NIGHT
7.IMAGE
8.MOTION
9.SYSTEM
10.EXIT
DC
AUTO
OFF
OFF
AUTO
OFF

- 19 -
◆ BRIGHTNESS : The brightness can be adjusted. The brightness control range is 1~20.
◆ SHUTTER : DC lens is launched with the setting of 1/30 and the manual lens is launched
with the setting of Auto shutter, but the shutter speed can be adjusted from 1/30 to
1/30,000.
→FLK : Select FLK mode if flickering occurs ; caused by the unmatched frequency of
electric light.
NOTE
* Sense-Up mode is not worked when Electronic shutter is selected as Manual.
◆ SENSE-UP : The bright screen can be displayed by sensing the degree of the darkness
automatically under the circumstance of low light condition or at night.
→ Off ~x32 Level Adjustable.
◆ AGC (Auto Gain Control) : The higher the AGC level is, the more noises appear.
→0~20 Level selectable.
White Balance
Use this function when the color adjustment of a screen is needed.
1. Move the triangular indicator to WHITE BAL on the SETUP menu screen using the Up and
Down button.
2. Select the desired mode by using the left or Right button.
MENU
1.LENS
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.DNR
6.DAY&NIGHT
7.IMAGE
8.MOTION
9.SYSTEM
10.EXIT
DC
AUTO
OFF
OFF
AUTO
OFF