Idis DA-WM1100 User manual

This manual is intended for users of the DA-WM1100 wall
mounting bracket. It includes instructions for mounting the DA-
WM1100 wall mounting bracket to a wall.
•This bracket is intended to be used with DC-D
series model of camera. Do not use it with other
models of cameras.
•This installation should be performed by a
qualified service personnel in conformance to all
local codes.
•You may need to reinforce the wall. If the wall is
not strong enough to support the camera, the
camera may fall.
•Do not use this product for other purposes.
Mounting
Mount the bracket to the wall as follows:
1 Insert cables from external devices, network and power
adapter through the hole in the rear of bracket.
2 Mount bracket to the wall by using the anchors and
screws.
Bracket
3
Screw the plate to bracket by using the screws.
Bracket
Plate
DA-WM1100 INSTALLATION MANUAL

IDIS Co., Ltd.
For more information, please visit www.idisglobal.com
Connect your camera to the bracket as follows:
4 Screw the camera bottom cover onto the plate.
5 Connect the camera dome cover onto the camera
bottom cover.
6 Turn on power.
Plate
Camera
Bottom
Cover
Camera
Dome
Cover
Dimensions
Unit: mm (inch)
46 (1.81)
82 (3.23)
113 (4.45)
113 (4.45)
281.2 (11.07)
144.4 (5.69)
4.5
Ver.1.0