IEI Technology IMBA-Q670 User manual

1
ATX Motherboard supports 32nm LGA1155 Intel® Core™
i7/i5/i3 CPU per Intel® Q67, DDR3, VGA/DVI-D/HDMI,
Dual Intel® PCIe GbE, USB 3.0, SATA 6Gb/s, HD Audio and
RoHS
IMBA-Q670
Quick Installation Guide
Version 2.0
Aug. 15, 2011
Package List
IMBA-Q670 package includes the following items:
l1 x IMBA-Q670 Single Board Computer
l4x SATA Cable
l1 x I/O Shielding
l1 x Mini Jumper Pack
l1 x Utility CD(within manual)
l1 x QIG (Quick Installation Guide)
l1 x One Key Recovery CD
©2011 Copyright by IEI Technology corp.
All rights reserved.

2
Specifications
lCPU:
LGA1155 socket supports Intel® Core™ i7/i5 Quad cores and i3
Dual core processor
lSystem chipset:Intel® Q67
lBIOS: UEFIBIOS
lSystem memory:
Four 240-pin 1333/1066MHz Dual-Channel DDR3 SDRAM
Unbuffered DIMM supported (system max. 32GB)
lEthernet:
Intel® 82583V PCIe controller
Intel® 82579 PHY with Intel®AMT 7.0 supported
lSuper IO: Fintek F81866
lI/O Interface:
5x RS-232
1 x RS-422/485
2x SATA 6Gb/s
4 x SATA 3Gb/s
1 x LPT
2 x USB 3.0 by NEC D720200F1
10 x USB 2.0 (2 on rear, 8 by pin header)
1 x PS/2 KB/MB
lExpansion:
1xPCIe x16 slot
1 x PCIe x4 slot
1 x PCIe x1 slot
4 x PCI slots
lDigital I/O: 8-bit digital I/O (4-bit input, 4-bit output)
lDisplay Output:
VGA/ HDMI/ DVI-DIntegrated in the Intel® Q67
lGraphic Engine:
Support for DX10.1 and OpenGL3.0
Full MPEG2, VC1, AVC Decode
lAudio: Realtek ALC888 HD Audio Codec (Line-in, Line-out, Mic)

3
lFront Audio: 10-pin (2x5) header
lTPM: 20-pin (2x10) header
lSMBus:4-pin (1x4) wafer
lI2C: 4-pin (1x4) wafer
lWatchdog Timer:
Software programmable supports 1~255sec.System reset
lPower supply:5V/12V, AT/ATX supported
lPower Consumption:
[email protected],[email protected], [email protected], [email protected],
[email protected] (Intel® Core™ i5-2400 3.10GHz CPU with 1333MHz
DDR3 4GB x 4 memory)
lTemperature: Operation: -10°C~60°C
lHumidity: Operation: 5%~95%non-condensing
lDimensions: 244mm x 305mm
Ordering Information
lIMBA-Q670-R10：
ATX Motherboard supports 32nm LGA1155 Intel® Core™ i7/i5/i3
CPU per Intel® Q67, DDR3, VGA/DVI-D/HDMI, Dual Intel® PCIe GbE,
USB 3.0, SATA 6Gb/s, HD Audio and RoHS
lCB-USB02-RS：Dual ports USB cable with bracket
l32200-074800-RS：RS-422/485 cable, 200mm
l19800-000051-RS：RS-232 cable, 230mm
l32102-000100-200-RS：SATA power Cable
l19800-000049-RS：LPT Cable
lCF-1156A-RS：High performance LGA1155/LGA1156 Cooler kit, 1U
Chassis compatible, 73W
lCF-1156B-RS：High performance LGA1155/LGA1156 Cooler kit, 95W
lTPM-IN01-R11：20-pin INFINEON TPM module, software
management Tool, Firmware V3.17

4
Jumpers setting and Connectors
LABEL FUNCTION
J_CMOS1 CMOS State Setting
JATX_AT1 AT mode or ATX mode Selection
WOL_SEL1
Wake On LAN Selection
SATA1~2&3~6
Serial ATA 6Gb/s & 3Gb/s Connector
F_PANEL1 Front Panel connector
JSPI1 SPI Flash Program Connector
TPM1 Trusted Platform Module connector
COM1,2,3,5
Internal Serial Port Connectors
LPT1 Parallel Port Connector
DIO1 Digital I/O Connector
SYS_FAN1
System Fan Connector
SPDIF1 SPDIF Connector
FP_AUDIO1
Front Panel Audio Connector
ATX1 24-Pin ATX Power Supply Connector
CPU12V1 +12V Power Source Connector
CPU_FAN1
CPU FAN
KB_MS1 Internal PS/2 Mouse & Keyboard Connector
I2C_1 I2C Connector
SMBUS_1 SMBus Connector
USB1~4 Internal USB2.0 Connectors
KB_MS2 PS/2 Mouse & Keyboard Connector
HDMI1 HDMI Connector
COM6 External Serial Port DB-9Connectors
LAN1_USB01
RJ-45 LAN and USB2.0 Connector
LAN2_USB23
RJ-45 LAN and USB3.0 Connector
AUDIO_CV1
Audio Connector
COM4 Internal Serial Port RS-422/RS485 Connectors

5
J_COMS1 : Clear CMOS Setup
PIN NO.
DESCRIPTION
Short 1-2
Keep CMOS Setup(default)
Short 2-3
Clear CMOS Setup
WOL_SEL1: Wake On LAN
PIN NO. DESCRIPTION
1-2
(default)* Enable
Short 2-3Disable
JATX_AT1:
ATX mode or AT mode Selection
PIN NO. DESCRIPTION
OPEN AT Mode
SHORT ATX Mode
SATA1、SATA2 : Serial ATA 6Gb/sConnector
PIN NO.
DESCRIPTION PIN NO.
DESCRIPTION
1GND 5RXN
2TXP6RXP
3TXN7GND
4GND 8N/C
COM1,2,3,5
:
Internal
Serial
Port Connector
PIN NO. DESCRIPTION
PIN NO. DESCRIPTION
1-NDCD1 6-NCTS1
2-NDSR1 7-NDTR1
3NSIN1 8-XRI1
4-NRTS1 9GND
5NSOUT1 10 GND
SYS_FAN1、SYS_FAN2:
System Fan Connector
PIN NO.
DESCRIPTION
1FANIO
2+12V (PWM)
3GND
SATA3-6 : Serial ATA 3Gb/sConnector
PIN NO.
DESCRIPTION PIN NO.
DESCRIPTION
1GND 5RXN_A
2TXP_A 6RXP_A
3TXN_A 7GND
4GND 8GND
9TXP_B 10 TXN_B
11 GND 12 RXN_B
13 RXP_B 14 GND

6
DIO1 : Digital Input / Output Connector
PIN NO.
DESCRIPTION PIN NO.
DESCRIPTION
1GND 2VCC
3Output 3 4Output 2
5Output 1 6Output 0
7Input 3 8Input 2
9Input 1 10 Input 0
TPM1 : TPM Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1Clock 2GND
3Frame# 4NC(KEY)
5Reset# 6+5V
7LAD3 8LAD2
9+3.3V 10 LAD1
11 LAD0 12 GND
13 SMB CLK 14 SMB DATA
15 +3.3V Standby 16 Serial IRQ
17 GND 18 Clock Run#
19 Power Down# 20 DREQ#
JSPI1: Flash SPI ROM Connector
USB01, USB23, USB45
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1+3.3V 2GND
3CS0 4CLK
5SO0 6SI
7NC 8NC
F_PANEL1
:
PWR & RST Buttons
and Indicators
panel
PIN
DESCRIPTION
PIN
DESCRIPTION
1
ACPILED 2
BEEP_PWR
3
NC 4
NC
PWR_LED
5
GND 6
NC
7
PWRBTN_SW#_
C8
PC_BEEP
BUZZER
PWR_BTN
9
GND 10
NC
11
IDELED 12
EXTRST-
HDD_LED
13
IDELED-14
GND RESET

7
LPT
1
: Parallel Port
Connector
PIN NO.
DESCRIPTION PIN NO.
DESCRIPTION
1STROBE# 14 AUTO FORM
FEED #
2DATA0 15 ERROR#
3DATA1 16 INITIALIZE#
4DATA2 17 PRINTER
SELECT LN#
5DATA3 18 GND
6DATA4 19 GND
7DATA5 20 GND
8DATA6 21 GND
9DATA7 22 GND
10 ACKNOWLEDG
E# 23 GND
11 BUSY 24 GND
12 PAPER EMPTY 25 GND
13 PRINTER
SELECT 26 N/C
SPDIF1 : SPDIF CONNECTOR
PIN NO.
DESCRIPTION
15V
2NC
3SPDIFOUT
4GND
5SPDIFIN
AP_AUDIO1 : Audio Source Connector
PIN NO.
DESCRIPTION PIN NO.
DESCRIPTION
1LMIC2_L 2AUD GND
3LMIC2_R 4PRESENCE#
5LLINE2-R6MIC2-JD
7F_SENSE 8NC
9LLINE2-L10 LINE2-JD
CPU_FAN1:
CPU Fan Connector
PIN
DESCRIPTION
1GND
2+12V
3FANIO1
4PWM

8
ATX1: 20Pin ATX Power Supply Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1+3.3Vdc 11 +3.3Vdc
2+3.3Vdc 12 -12Vdc
3GND 13 GND
4+5Vdc 14 PS-ON
5GND 15 GND
6+5Vdc 16 GND
7GND 17 GND
8PWR-OK 18 -5Vdc
9+5VSby 19 +5Vdc
10 +12Vdc 20 +5Vdc
SMBus :
PIN DESCRIPTION
1+5V_DUAL
2SMBCLK
3SMBDATA
4GND
COM4
PIN DESCRIPTION
1RXD485#
2RXD485+
3TXD485+
4TXD485#
ATX12V1 :
+12V MAIN POWER Connector
PIN
DESCRIPTION
1+5V
2GND
3GND
4+12V
KB_MS1:
6-pin Wafer Keyboard Connector
PIN NO. DESCRIPTION
1VCC5_KBMS
2MSDATA
3MSCLK
4KBDATA
5KBCLK
6KBGND
I2C_1
PIN DESCRIPTION
1+5V_DUAL
2PCH_GP38_PU
3PCH_GP39_PU
4GND

9
KB_MS2 : Mouse& KeyboardConnector
PIN
DESCRIPTION PIN DESCRIPTION
1Keyboard Data 7MouseData
2NC 8NC
3GND 9GND
4VCC 10 VCC
5Keyboard Clock 11 MouseClock
6NC 12 NC
HDMI1
:
HDMI
C
onnector
PIN DESCRIPTION PIN DESCRIPTION
1HDMI_DATA2 13 N/C
2GND 14 N/C
3HDMI_DATA2# 15 HDMI_SCL
4HDMI_DATA1 16 HDMI_SDA
5GND 17 GND
6HDMI_DATA1# 18 +5V
7HDMI_DATA0 19 HDMI_HPD
8GND 20 HDMI_GND
9HDMI_DATA0# 21 HDMI_GND
10 HDMI_CLK 22 HDMI_GND
11 GND 23 HDMI_GND
12
HDMI_CLK#
AUDIO_CV1: Audio input and output connector
PIN NO.
DESCRIPTION
Line-in CD/DVD or other audio source input port
Line_ot Connect this port to headphone or speaker
Microphone
Connect this port to microphone
USB1-4:Internal USB Connectors
PIN
DESCRIPTION
PIN
DESCRIPTION
1VCC 2GND
3DATA-4DATA+
5DATA+ 6DATA-
7GND 8VCC

10
COM1 : External Serial Port Connector
PIN DESCRIPTION
1DATA CARRIER DETECT (DCD1)
2RECEIVE DATA (RXD1)
3TRANSMIT DATA (TXD1)
4DATA TERMINAL READY (DTR1)
5GND (GND1)
6DATA SET READY (DSR1)
7REQUEST TO SEND (RTS1)
8CLEAR TO SEND (CTS1)
9RING INDICATOR (RI1)
LAN1、LAN2 : LAN port connector
PIN NO.
DESCRIPTION PIN NO.
DESCRIPTION
1MDIA3-2MDIA3+
3MDIA2-4MDIA1-
5MDIA1+ 6MDIA2+
7MDIA0-8MDIA0+
USB 3.0 : USB 3.0 port connector
PIN NO.
DESCRIPTION PIN NO.
DESCRIPTION
1VCC 2DATA-
3DATA+ 4GND
5StdA_SSRX-6StdA_SSRX+
7GND_DRAIN 8StdA_SSTX-
9StdA_SSTX+
USB 2.0 : USB 2.0 port connector
PIN NO. DESCRIPTION
1VCC
2DATA-
3DATA+
4GND