IEI Technology ICE-QM871 User manual

COM Express Basic Type 6 Module, Intel® Haswell mobile
BG Processor,VG , LVDS, DisplayPort, HDMI, GbE, S T III,
USB 3.0 and HD udio, RoHS
ICE-QM871
Quick Installation Guide
Version 1.0
Jan, 22, 2014
Package Contents
ICE- QM871 package includes the following items:
1 x ICE-QM871 single board computer
1 x Heat Spreader
1 x Cooler
1 x Driver CD
1 x Utility CD
1 x QIG (Quick Installation Guide)
WARNING!
Never run the embedded module without the heat
sink.
plate shipped with the ICE-QM871
acts as a thermal interface between the
module and the heat sink. The heat sink must be installed on the
heatspreader plate to maintain proper operating
temperatures. Make sure to
maintain the heatspreader plate temperature under 60°
C in operation.
©2006 Copyright by IEI Integration
corp.
All rights reserved.
1
COM Express Basic Type 6 Module, Intel® Haswell mobile
BG Processor,VG , LVDS, DisplayPort, HDMI, GbE, S T III,
Quick Installation Guide
sink.
The heatspreader
acts as a thermal interface between the
module and the heat sink. The heat sink must be installed on the
temperatures. Make sure to
C in operation.
corp.

2
Specifications
Form Factor
PICMG COM Express R2.1 Basic Type 6
CPU
BGA 1364 type for Intel® 22nm Haswell mobile processor
System Chipset
Intel® QM87
Memory
Two 204-pin 1600/1333 MHz dual-channel DDR3 SDRAM
unbuffered DIMMs supported (system max. 16GB)
Supports 1.35V DDR3L
BIOS
UEFI BIOS
Graphics Engine
Intel® HD Graphics Gen 7.5 supports DX11.1 and OpenCL 1.2,
OpenGL 3.2 Full MPEG2, VC1, AVC Decode
Display Output
3 x DDI (up to 2560 x 1600 @60Hz)
1 x VGA up to QXGA (up to 2048 x 1536 @75Hz)
1 x 18/24-bit dual-channel LVDS (up to 1920 x 1200 @60Hz)
Ethernet
GbE: Intel® I217LM Clarkville-V with Intel® AMT 9.0 support
Embedded Controller
iWDD
I/O Interface
2 x RS-232 (to baseboard) 8 x USB 2.0 (to baseboard)
4 x USB 3.0 (to baseboard) 4 x SATA 6Gb/s (signal to baseboard)
Audio
High definition audio interface
SMBus Yes (to baseboard)
I2C Yes (to baseboard)
LPC Yes (to baseboard)

3
Expansions
1 x PCIe x16 signal (to baseboard)
7 x PCIe x1 signal (to baseboard)
Watchdog Timer
Software programmable supports 1~255 sec. system reset
GPIO
8-bit GPIO (to baseboard)
TPM
Through the baseboard
Intel® AMT
Supports Intel® AMT 9.0
Power Consumption
+12V1@ 1.86A, +12V2@ 3.70A (Intel® Core™ i7-4700EQ 2.4GHz
CPU 8GB (2 x 4GB) 1333MHz DDR3 memory)
Operating Temperature
-20°C ~ 60°C
Operating Humidity
5% ~ 95%, non-condensing
Dimensions
125 mm x 95 mm
Weight
GW: 600g/NW: 250g
Ordering Information
ICE-QM871-i7-R10:COM Express Basic Type 6 module, Intel® Core™ i7
processor, VGA/LVDS, GbE, SATA 6Gb/s, USB 3.0, Audio and RoHS
ICE-QM871-i5-R10:COM Express Basic Type 6 module, Intel® Core™ i5
processor, VGA/LVDS, GbE, SATA 6Gb/s, USB 3.0, Audio and RoHS
ICE-QM871-i3-R10:COM Express Basic Type 6 module, Intel® Core™ i3
processor, VGA/LVDS, GbE, SATA 6Gb/s, USB 3.0, Audio and RoHS
ICE-QM871-C-R10:COM Express Basic Type 6 module, Intel®
Celeron®
processor, VGA/LVDS, GbE, SATA 6Gb/s, USB 3.0, Audio and RoHS
ICE-DB-T6R-R10: Base Board for COM Express Type 6 Module COM.0 Rev.
2.1,support PICMG EAPI R1.0

4
Table of Jumper Setting
LABEL
FUNCTION
SW1
LCD Panel Type Setting switch
1. LVDS Panel type Selection
The Panel type of LVDS can be selected by using SW1. ON=0 OFF=1
SW1
4321
EDID
Resolution Color Depth Channel
0000 800X600 18-bit Single
0001 1024X768 18-bit Single
0010 1024X768 24-bit Single
0011 1280X768 18-bit Single
0100 1280X800 18-bit Single
0101 1280X960 18-bit Single
0110 1280X1024 24-bit Dual
0111 1366X768 18-bit Single
1000 1366X768 24-bit Single
1001 1440X900 24-bit Dual
1010 1400X1050 24-bit Dual
1011 1600X900 24-bit Dual
1100 1680X1050 24-bit Dual
1101 1600X1200 24-bit Dual
1110 1920X1080 24-bit Dual
1111 1920X1200 24-bit Dual

5
1. Flash SPI ROM (BIOS)
•JSPI1: Flash BIOS SPI ROM
PIN NO.
DESCRIPTION
1
+V3.3M_SPI_CON
2
SPI_CS
3
SPI_SO_SW
4
SPI_CLK_SW
5
SPI_SI_SW
6
GND
2. Flash SPI ROM (EC)
•JSPI2: Flash BIOS SPI ROM
PIN NO.
DESCRIPTION
1
+V3.3M_SPI_CON
_EC
2
SPI_CS
#0_CN_EC
3
SPI_SO_SW
_EC
4
SPI_CLK_SW
_EC
5
SPI_SI_SW
_EC
6
GND
Table of Connectors
LABEL
FUNCTION
JSPI
1
FLASH SPI ROM (BIOS)
JSPI2
FLASH SPI ROM (EC)
J3
COM Express
Connector
AB
J4
COM Express
Connector
CD

6
3. COM Express Connector AB
•J3: The standard COM Express connector AB location and pinouts
are shown below
Pin No. Description Pin No. Description
A1 GND B1 GND15
A2 GBE0_MDI3- B2 GBE0_ACT#
A3 GBE0_MDI3+ B3 LPC_FRAME#
A4 GBE0_LINK100# B4 LPC_AD0
A5 GBE0_LINK1000#
B5 LPC_AD1
A6 GBE0_MDI2- B6 LPC_AD2
A7 GBE0_MDI2+ B7 LPC_AD3
A8 GBE0_LINK# B8 LPC_DRQ0#
A9 GBE0_MDI1- B9 LPC_DRQ1#
A10 GBE0_MDI1+ B10 LPC_CLK
A11 GND1 B11 GND16
A12 GBE0_MDI0- B12 PWRBTN#
A13 GBE0_MDI0+ B13 SMB_CK
A14 GBE0_CTREF B14 SMB_DAT
A15 SUS_S3# B15 SMB_ALERT#
A16 SATA0_TX+ B16 SATA1_TX+
A17 SATA0_TX- B17 SATA1_TX-
A18 SUS_S4# B18 SUS_STAT#
A19 SATA0_RX+ B19 SATA1_RX+
A20 SATA0_RX- B20 SATA1_RX-
A21 GND2 B21 GND17
A22 SATA2_TX+ B22 SATA3_TX+
A23 SATA2_TX- B23 SATA3_TX-
A24 SUS_S5# B24 PWR_OK
A25 SATA2_RX+ B25 SATA3_RX+
A26 SATA2_RX- B26 SATA3_RX-
A27 BATLOW# B27 WDT
A28 ATA_ACT# B28 AC/HD_SDIN2
A29 AC/HD_SYNC B29 AC/HD_SDIN1
A30 AC/HD_RST# B30 AC/HD_SDIN0
A31 GND3 B31 GND18
A32 AC/HD_BITCLK B32 SPKR
A33 AC/HD_SDOUT B33 I2C_CK
A34 BIOS_DISABLE# B34 I2C_DAT
A35 THRMTRIP# B35 THRM#

7
Pin No. Description Pin No. Description
A36 USB6- B36 USB7-
A37 USB6+ B37 USB7+
A38 USB_6_7_OC# B38 USB_4_5_OC#
A39 USB4- B39 USB5-
A40 USB4+ B40 USB5+
A41 GND4 B41 GND
A42 USB2- B42 USB3-
A43 USB2+ B43 USB3+
A44 USB_2_3_OC# B44 USB_0_1_OC#
A45 USB0- B45 USB1-
A46 USB0+ B46 USB1+
A47 VCC_RTC B47 EXCD1_PERST#
A48 EXCD0_PERST# B48 EXCD1_CPPE#
A49 EXCD0_CPPE# B49 SYS_RESET#
A50 LPC_SERIRQ B50 CB_RESET#
A51 GND5 B51 GND20
A52 PCIE_TX5+ B52 PCIE_RX5+
A53 PCIE_TX5- B53 PCIE_RX5-
A54 GPI0 B54 GPO1
A55 PCIE_TX4+ B55 PCIE_RX4+
A56 PCIE_TX4- B56 PCIE_RX4-
A57 GND6 B57 GPO2
A58 PCIE_TX3+ B58 PCIE_RX3+
A59 PCIE_TX3- B59 PCIE_RX3-
A60 GND7 B60 GND
A61 PCIE_TX2+ B61 PCIE_RX2+
A62 PCIE_TX2- B62 PCIE_RX2-
A63 GPI1 B63 GPO3
A64 PCIE_TX1+ B64 PCIE_RX1+
A65 PCIE_TX1- B65 PCIE_RX1-
A66 GND8 B66 WAKE0#
A67 GPI2 B67 WAKE1#
A68 PCIE_TX0+ B68 PCIE_RX0+
A69 PCIE_TX0- B69 PCIE_RX0-
A70 GND9 B70 GND22
A71 LVDS_A0+ B71 LVDS_B0+
A72 LVDS_A0- B72 LVDS_B0-
A73 LVDS_A1+ B73 LVDS_B1+
A74 LVDS_A1- B74 LVDS_B1-

8
Pin No. Description Pin No. Description
A75 LVDS_A2+ B75 LVDS_B2+
A76 LVDS_A2- B76 LVDS_B2-
A77 LVDS_VDD_EN B77 LVDS_B3+
A78 LVDS_A3+ B78 LVDS_B3-
A79 LVDS_A3- B79 LVDS_BKLT_EN
A80 GND10 B80 GND23
A81 LVDS_A_CK+ B81 LVDS_B_CK+
A82 LVDS_A_CK- B82 LVDS_B_CK-
A83 LVDS_I2C_CK B83 LVDS_BKLT_CTRL
A84 LVDS_I2C_DAT B84 VCC5SBY1
A85 GPI3 B85 VCC5SBY2
A86 RSVD B86 VCC5SBY3
A87 RSVD B87 VCC5SBY4
A88 PCIE0_CK_REF+ B88 BIOS_DIS1#
A89 PCIE0_CK_REF- B89 VGA_RED
A90 GND11 B90 GND24
A91 SPI_VCC B91 VGA_GRN
A92 SPI_MISO B92 VGA_BLU
A93 GPO0 B93 VGA_HSYNC
A94 SPI_CLK B94 VGA_VSYNC
A95 SPI_MOSI B95 VGA_I2C_CK
A96 PP_TPM B96 VGA_I2C_DAT
A97 RSVD B97 SPI_CS#
A98 RS1_TX B98 RSVD
A99 RS1_RX B99 RSVD
A100 GND13 B100 GND25
A101 RS2_TX B101 FAN_PWMOUT
A102 RS2_RX B102 FAN_TACHIN
A103 LID# B103 SLEEP#
A104 VCC_12V7 B104 VCC_12V16
A105 VCC_12V8 B105 VCC_12V17
A106 VCC_12V9 B106 VCC_12V18
A107 VCC_12V10 B107 VCC_12V19
A108 VCC_12V11 B108 VCC_12V20
A109 VCC_12V12 B109 VCC_12V21
A110 GND14 B110 GND26

9
4. COM Express Connector CD
•J4: The standard COM Express connector CD location and pinouts
are shown below
Pin No. Description Pin No. Description
C1 GND0 D1 GND15
C2 GND D2 GND
C3 USB_SSRX0- D3 USB_SSTX0-
C4 USB_SSRX0+ D4 USB_SSTX0+
C5 GND D5 GND
C6 USB_SSRX1- D6 USB_SSTX1-
C7 USB_SSRX1+ D7 USB_SSTX1+
C8 GND D8 GND
C9 USB_SSRX2- D9 USB_SSTX2-
C10 USB_SSRX2+ D10 USB_SSTX2+
C11 GND1 D11 GND16
C12 USB_SSRX3- D12 USB_SSTX3-
C13 USB_SSRX3+ D13 USB_SSTX3+
C14 GND D14 GND
C15 RSVD D15 DDI1_CTRLCLK_AUX+
C16 RSVD D16 DDI1_CTRLDATA_AUX-
C17 RSVD D17 RSVD
C18 RSVD D18 RSVD
C19 PCIE_RX6+ D19 PCIE_TX6+
C20 PCIE_RX6- D20 PCIE_TX6-
C21 GND2 D21 GND17
C22 RSVD D22 RSVD
C23 RSVD D23 RSVD
C24 DDI1_HPD D24 RSVD
C25 RSVD D25 RSVD
C26 RSVD - D26 DDI1_PAIR0+
C27 RSVD D27 DDI1_PAIR0-
C28 RSVD D28 RSVD
C29 RSVD D29 DDI1_PAIR1+
C30 RSVD D30 DDI1_PAIR1-
C31 GND3 D31 GND18
C32 DDI2_CTRLCLK_AUX+ D32 DDI1_PAIR2+
C33 DDI2_CTRLDATA_AUX-
D33 DDI1_PAIR2-
C34 DDI2_DDC_AUX_SEL
D34 DDI1_DDC_AUX_SEL
C35 RSVD D35 RSVD

10
Pin No. Description Pin No. Description
C36 DDI3_CTRLCLK_AUX+ D36 DDI1_PAIR3+
C37 DDI3_CTRLDATA_AUX-
D37 DDI1_PAIR3-
C38 DDI3_DDC_AUX_SEL
D38 RSVD
C39 DDI3_PAIR0+ D39 DDI2_PAIR0+
C40 DDI3_PAIR0- D40 DDI2_PAIR0-
C41 GND4 D41 GND19
C42 DDI3_PAIR1+ D42 DDI2_PAIR1+
C43 DDI3_PAIR1- D43 DDI2_PAIR1-
C44 DDI3_HPD D44 DDI2_HPD
C45 RSVD D45 RSVD
C46 DDI3_PAIR2+ D46 DDI2_PAIR2+
C47 DDI3_PAIR2- D47 DDI2_PAIR2-
C48 RSVD D48 RSVD
C49 DDI3_PAIR3+ D49 DDI2_PAIR3+
C50 DDI3_PAIR3- D50 DDI2_PAIR3-
C51 GND5 D51 GND20
C52 PEG_RX0+ D52 PEG_TX0+
C53 PEG_RX0- D53 PEG_TX0-
C54 RSVD D54 PEG_LANE_RV#
C55 PEG_RX1+ D55 PEG_TX1+
C56 PEG_RX1- D56 PEG_TX1-
C57 RSVD D57 TYPE2#
C58 PEG_RX2+ D58 PEG_TX2+
C59 PEG_RX2- D59 PEG_TX2-
C60 GND7 D60 GND21
C61 PEG_RX3+ D61 PEG_TX3+
C62 PEG_RX3- D62 PEG_TX3-
C63 RSVD1 D63 RSVD10
C64 RSVD2 D64 RSVD9
C65 PEG_RX4+ D65 PEG_TX4+
C66 PEG_RX4- D66 PEG_TX4-
C67 RSVD3 D67 GND28
C68 PEG_RX5+ D68 PEG_TX5+
C69 PEG_RX5- D69 PEG_TX5-
C70 GND9 D70 GND22
C71 PEG_RX6+ D71 PEG_TX6+
C72 PEG_RX6- D72 PEG_TX6-
C73 GND D73 GND
C74 PEG_RX7+ D74 PEG_TX7+