IEI Technology KINO-9452 User manual

8

1
Mini-ITX Motherboard with Intel® Core Duo/Core Solo
Processor, Dual PCI-E GbE, HDTV output ＆Two
independent stream Audio
KINO-9452
Quick Installation Guide
Version 1.1
Nov 14, 2006
Package List
KINO-9452 package includes the following items:
 1 x KINO-9452 single board computer
 1 x Dual RS-232 cable
 1 x IDE Cable
 1 x SATA Power Cable
 2 x SATA Cable
 1 x I/O Shielding
 1 x Mini Jumper Pack
 1 x Utility CD
 1 x QIG (quick installation guide)
 1 x HDTV out cable
©2006 Copyright by IEI Technology corp.
All rights reserved.

2
Specifications
 CPU: Socket 479 Intel® Core Duo/Solo with 667 MHz FSB
 System Chipset: Intel® 945GM + ICH7M
 BIOS: AMI BIOS
 System memory
2×240-pin Daul channel DDRII 400/533/667 MHz up to 2GB

Ethernet
Dual Broadcom BCM5787 PCI-E GbE (LAN1 with ASF2.0
remote control support)

I/O
6 x USB 2.0
2 x SATAII-300
1 x IDE
3 x RS-232
1 x RS-232/422/485
2 x PS/2 for KB/MS
 Expansion
1 x Mini PCI Slot
1 x PCI
 Super I/O: ITE8712
 Digital I/O: 8 bit digital l/O,4 input / 4 output by super l/O
 HD Audio:Realtek ALC883 with 7.1 channel HD interface with 2
steams audio support
 Display
Integrated in Intel 945GM to support HDTV and CRT HDTV Out
MacroVision support / Overscaling / Component,S-Video and
Composite output 480P / 720P / 1080i / 1080P and NTSC / PAL
Support

LVDS: Dual channel 18-bit LVDS
 WDT: Software programmable 1-255 sec. by super I/O

Power supply: ATX support

Power Consumption
[email protected], [email protected], +3.3V@ 3.12A, [email protected]
(Intel® Core Duo 2.16GHz, DDRII 1GB*2)—3D MARK

7

6
Board Layout: Jumper and Connector Locations

3

Temperature: Operation:0~60°C(32~140°F)
 Humidity: Operation: 5%~90% non-condensing

Dimension: 170mm x 170mm

Weight: GW: 1100 g; NW: 400 g
Ordering Information
 KINO-9452-R11
Mini-ITX Motherboard with Intel® Core Duo/Core Solo Processor,
SATAII, Dual PCI-E GbE, USB 2.0 ＆Audio
 32200-000077-RS: RS-232/422/485 Cable
 CB-USB02-RS: USB Cable
 CF-479B-RS: CPU Cooler
Jumpers setting and Connectors
JP1 : COM2 RS232/RS422 or RS485
Type Select
JP1 DESCRIPTION
1-2 RS232
2-3 RS422 or RS485
JP2 : LVDS LCD Voltage
Select
JP2 DESCRIPTION
1-2 +3V
3-4 +5V
5-6 +12V
JP3 : Clear CMOS Setup
JP3 DESCRIPTION
1-2
(default)*
Keep CMOS Setup
(Normal operation)
2-3 Clear CMOS Setup
USB4/5 : 2 ports USB Connector
PIN DESCRIPTION PIN DESCRIPTION
1 VCC 2 GND
3 DATA0- 4 DATA1+
5 DATA0+ 6 DATA1-
7 GND 8 VCC
CPU_FAN1,SYS_FAN1 ,NB_FA
N1: Fan Connector
PIN DESCRIPTION
1 GND
2 +12V
3 Sense

4
AUDIO2 = Audio Connector
PIN DESCRIPTION PIN DESCRIPTION
1 Port1_L 2 GND
3 Port1_R 4 PRESENCE
5 Port2_R 6
SENSE1_RETUR
7 SENSE_SEND 8 (KEY)
9 Port2_L 10 SENSE2_RETUR
COM2 : 14-Pin Serial Port Connector
PIN DESCRIPTION PIN DESCRIPTION
1 DCD 2 DSR
3 RXD 4 RTS
5 TXD 6 CTS
7 DTR 8 RI
9 GND 10 NC
11 TX+ 12 TX-
13 RX+ 14 RX-
DIO1: 10-pin Digital I/O Connector
PIN DESCRIPTION PIN DESCRIPTION
1 GND 2 +5V
3 INPUT0 4 OUTPUT0
5 INPUT1 6 OUTPUT1
7 INPUT2 8 OUTPUT2
9 INPUT3 10 OUTPUT3
COM3,4 : 10-Pin Serial Port Connector
PIN DESCRIPTION PIN DESCRIPTION
1 DCD 2 DSR
3 RXD 4 RTS
5 TXD 6 CTS
7 DTR 8 RI
9 GND 10 NC

5
F_PANEL1 : Front Panel Jumper
PIN DESCRIPTION PIN DESCRIPTION
1 Power LED+ 2 Speaker+
3 NC 4 NC
5 Power LED- 6 NC
7 Power Button+ 8 Speaker-
9 Power Button- 10 NC
11 IDE LED+ 12 Reset Button+
13 IDE LED- 14 Reset Button-
CN1 : LCD Back Light connector
PIN DESCRIPTION PIN DESCRIPTION
1 Back Light Power 2 Back Light Power
3 Back Light enable 4 NC
5 GND 6 GND
LVDS1 : LVDS LCD Connector
PIN DESCRIPTION PIN DESCRIPTION
1 GND 2 GND
3 1st LVDS data0 output + 4 1st LVDS data0 output-
5 1st LVDS data1 output + 6 1st LVDS data1 output-
7 1st LVDS data2 output + 8 1st LVDS data2 output-
9 1st LVDS clock output + 10 1st LVDS clock output-
11 NC 12 NC
13 GND 14 GND
15 2nd LVDS data0 output + 16 2nd LVDS data0 output-
17 2nd LVDS data1 output + 18 2nd LVDS data1 output-
19 2nd LVDS data2 output + 20 2nd LVDS data2 output-
21 2nd LVDS clock output + 22 2nd LVDS clock output-
23 NC 24 NC
25 GND 26 GND
27 +LCD (3.3V,5V or 12V) 28 +LCD (3.3V,5V or 12V)
29 +LCD (3.3V,5V or 12V) 30 +LCD (3.3V,5V or 12V)