IEI Technology NANO-945GSE2 User manual

EPIC SBC with Intel® Atom™ N270 1.6GHz, VGA/LVDS/TTL, Dual GbE,
CFII, USB, SATA and PC/104+, RoHS
NANO-945GSE2
Quick Installation Guide
Version 1.0
Mar. 11, 2009
Package Contents
NANO-945GSE2 package includes the following items
z1 x NANO-945GSE2 Single Board Computer
z2 x RS-232 Cable
z2 x SATA Cable
z1 x PS/2 KB/MS Y Cable
z1 x Power Cable
z1 x Mini Jumper Pack
z1 x Utility CD
z1 x QIG(Quick Installation Guide)
©2006 Copyright by IEI Technology corp.
All rights reserved.

Specifications
zCPU : Intel®Atom™ N270 1.6GHz with a 533MHz FSB
zSystem Chipset : Intel® 945GSE+ICH7M
zBIOS : AMI BIOS
zSystem Memory : 1x DDR2 SO-DIMM 400/533MHz
support up to 2GB
zEthernet : Dual Realtek RTL8111CP GbE (PCIe Interface)
zI/O Interface :
3 x RS-232 (COM1, COM2, COM4)
1 x RS-232/422/485 (COM3)
6 x USB 2.0 (2 on Rear Side, 4 by pin-header)
2 x SATA with 5V SATA Power DC Output
1 x LPT
1 x PS/2 for KB/MS
zExpansion :
1 x PC/104+ (PCI Bus + ISA Bus)
zDigital I/O :
8-bit digital I/O, 4-bit input/4-bit output
zInfrared Interface :
1x Infrared Interface by pin header
zSuper I/O :
First Super I/O : ITE IT8718F
Second Super I/O: Fintek 81216D
zDisplay Output :
Analog CRT Support for CRT Hot plug
18-bit Dual-Channel LVDS Support up to UXGA (1600x
1200)
24-bit TTL (LVDS to TTL)
(For Dual Display, only VGA+LVDS or VGA+TTL)
zAudio : Realtek ALC655 AC'97 Codec
zSSD : CF Type II
zWatchdog Timer :
Software programmable 1-255 sec. by Fintek 81216D
zPower Supply :
12V only, AT/ATX support
1x internal 2x2pin power connector

zPower Consumption :
[email protected] (Intel® AtomTM N270 1.6GHz with 1GB DDR2)
zTemperature :
Operation: 0 ~ 60° C (32 ~ 140° F)
zHumidity : Operation: 5% ~ 95%, non-condensing
zDimensions : 165mm x 115mm
zWeight : GW:700g, NW:350g
Ordering Information
zNANO-945GSE2-N270-R10 : EPIC SBC with Intel® Atom™ N270
1.6GHz, VGA/LVDS/TTL, Dual GbE, CFII, USB, SATA and PC/104+
z32000-070301-RS : Dual Ports USB Cable
z32200-000049-RS : RS-232 Cable
z32200-833600-RS : RS-422/485 Cable
z32100-043403-RS : ATX Power Cable
z32100-088600-RS : SATA Power Cable
z32000-114000-RS : SATA 5V power output Cable Kit for NANO series
z32200-015100-RS：LPT Cable

Connector /Jumper List
LABEL FUNCTION
ATXCTL1 Power on mode setting
BT1 Battery Connector
CN1
CN2 SATA1, SATA2 Power Connectors
CN3 LCD TTL Interface Connector
CN5 Main Power Input Connector (option)
COM1 External Serial Port Connectors (RS-232)
COM2
COM4 Internal Serial Port Connectors (RS-232)
COM3 Internal Serial Port Connector
(RS-232/422/485,RS-422/485 in JP2)
DIMM1 DDR2 SO-DIMM Slot
DIO1 Digital I/O Connector
F_PANEL1 PWR、RST Button、Indicators
INV1 LVDS Panel Voltage Supply Connector
IR1 Infrared Interface Connector
J_CMOS1 CMOS state setting jumper
J_LCD_TYPE1 LVDS Panel Resolution Selection jumper
J1 CPU Fan Connector
J3 LPT Connector
J4 PCI-104 Connector (PCI-BUS)
J5 5VSB & PS_ON Connector
J6 PC/104 Connector (ISA-BUS)
J8 Audio Connector
J9 Compact Flash Slot
JP1 Configure COM3 Mode jumper
JP2 COM3 RS-422/485 jumper
JP3 LVDS Voltage Selection
KB/PS1 PS/2 MOUSE & KEYBOARD Connector
LAN1
LAN2 RJ-45 LAN Connectors
LVDS1 LVDS Panel Connector
PW1 Main Power Input Connector
RST1 Reset button
SATA1
SATA2 Serial ATA Connectors
USB1 External USB Connectors
USB2
USB3 Internal USB Connectors
VGA1 VGA Connector

ATXCTL1: Power Supply Type Selection
ATXCTL1 DESCRIPTION
Open ATX (default)
Short AT
J_CMOS1: Clear CMOS setting
J_CMOS1 DESCRIPTION
1-2 Normal (default)
2-3 Clear CMOS Setup
J3: LPT Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 STROBE# 14 ALF#
2 PD0 15 ERROR#
3 PD1 16 PAR_INI#
4 PD2 17 SLCTIN#
5 PD3 18 GND
6 PD4 19 GND
7 PD5 20 GND
8 PD6 21 GND
9 PD7 22 GND
10 ACK# 23 GND
11 BUSY 24 GND
12 PE 25 GND
13 SLCT 26 N/C
JP3: LVDS Voltage Selection
JP3 DESCRIPTION
1-2 3.3V (default)
2-3 5V

CN3 : LCD TTL Interface Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 VCC_LCD 2 VCC_LCD
3 GND 4 GND
5 VCC_LCD 6 VCC_LCD
7 N/C 8 GND
9 TFT_B0 10 TFT_B1
11 TFT_B2 12 TFT_B3
13 TFT_B4 14 TFT_B5
15 TFT_B6 16 TFT_B7
17 TFT_G0 18 TFT_G1
19 TFT_G2 20 TFT_G3
21 TFT_G4 22 TFT_G5
23 TFT_G6 24 TFT_G7
25 TFT_R0 26 TFT_R1
27 TFT_R2 28 TFT_R3
29 TFT_R4 30 TFT_R5
31 TFT_R6 32 TFT_R7
33 GND 34 GND
35 FPCLK 36 T_VSYNC
37 TFT_EN 38 T_HSYNC
39 N/C 40 L_VDDEN
USB2, USB3 : Internal USB Connectors
PIN
NO. DESCRIPTION PIN NO. DESCRIPTION
1 +5V 2 GND
3 DATA- 4 DATA+
5 DATA+ 6 DATA-
7 GND 8 +5V

J9: Compact Flash Slot
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 GND 26 N/C
2 PDD3 27 PDD11
3 PDD4 28 PDD12
4 PDD5 29 PDD13
5 PDD6 30 PDD14
6 PDD7 31 PDD15
7 PDCS#1 32 PDCS#3
8 N/C 33 N/C
9 GND 34 PDIOR#
10 N/C 35 PDIOW#
11 N/C 36 VCC5
12 N/C 37 IRQ14
13 VCC5 38 VCC5
14 N/C 39 CSEL
15 N/C 40 N/C
16 N/C 41 IDERST#
17 N/C 42 PIORDY
18 PDA2 43 PDREQ
19 PDA1 44 PDDACK#
20 PDA0 45 IDEACTP#
21 PDD0 46 P66DET
22 PDD1 47 PDD8
23 PDD2 48 PDD9
24 N/C 49 PDD10
25 N/C 50 GND

COM1, COM2, COM3, COM4 : Internal/Externa Serial
Port Connectors (RS-232)
PIN
NO. DESCRIPTION PIN NO. DESCRIPTION
1 DATA CARRIER
DETECT (DCD#) 2 DATA SET READY (DSR#)
3 RECEIVE DATA
(RXD) 4 REQUEST TO SEND (RTS#)
5 TRANSMIT DATA
(TXD) 6 CLEAR TO SEND (CTS#)
7 DATA TERMINAL
READY (DTR#) 8 RING INDICATOR (RI#)
9 GND 10 N/C
J8: Audio Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 LINE OUT R 2 Line In R
3 GND 4 GND
5 LINE OUT L 6 Line In R
7 GND 8 GND
9 MICIN 10 N/C
DIO1: 8-bit GPIO Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 GND 2 VCC5(+5V)
3 DOUT3 4 DOUT2
5 DOUT1 6 DOUT0
7 DIN3 8 DIN2
9 DIN1 10 DIN0

J1 : Fan Connector
PIN NO. DESCRIPTION
1 DET
2 VCC(+12V)
3 GND
IR1 : Infrared Interface
Connector
PIN NO. DESCRIPTION
1 VCC5 (+5V)
2 N/C
3 IRRX
4 GND
5 IRTX
LVDS1 : LVDS Interface Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 GND 2 GND
3 LVDS_DAP0 4 LVDS_DAN0
5 LVDS_DAP1 6 LVDS_DAN1
7 LVDS_DAP2 8 LVDS_DAN2
9 LVDS_CLKA 10 LVDS_CLKA#
11 N/C 12 N/C
13 GND 14 GND
15 LVDS_DBP0 16 LVDS_DBN0
17 LVDS_DBP1 18 LVDS_DBN1
19 LVDS_DBP2 20 LVDS_DBN2
21 LVDS_CLKB 22 LVDS_CLKB#
23 N/C 24 N/C
25 GND 26 GND
27 VCC_LCD 28 VCC_LCD
29 VCC_LCD 30 VCC_LCD
BT1: Battery Connector
PIN NO. DESCRIPTION
1 BAT(3.3V)
2 GND

JP2: COM3 RS-422/485 pin-header
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 TX_422- 2 RX_422-
3 TX_422+ 4 RX_422+
5 D_485+ 6 D_485-
JP1: Configure COM3
Mode
JP1 DESCRIPTION
1-2 RS-232 (default)
3-4 RS-422
5-6 RS-485
J5: 5VSB & PS_ON
Connector
PIN NO. DESCRIPTION
1 VCC5SBY
2 GND
3 PS_ON#
KB/PS1 : MOUSE &
KEYBOARD Connector
PIN NO. DESCRIPTION
1 L_KDAT
2 L_MDAT
3 GND
4 +5V
5 L_KCLK
6 L_MCLK
7 GND
8 GND
9 GND
10 GND
F_PANEL1 : PWR & RST Button and Indicators
panel
PIN DESCRIPTI
ON PIN DESCRIPTI ON
1 PWRBTSW- 2 VCCPWR
BTN 3 GROUND 4 GROUND
Power
LED
5 VCC 6 SYSRST-HDD
LED 7 -HDLED 8 Ground
RESET