IEI Technology NANO-ULT3 User manual

1
EPIC SBC supports Intel® 14nm 6th Generation Mobile Core™ i7/i5/i3
and Celeron® on-board Processor (ULT) with HDMI/LVDS/iDP,
Dual PCIe GbE, USB 3.0, PCIe Mini, SATA 6Gb/s,
mSATA , COM, Audio and RoHS
NANO-ULT3
Quick Installation Guide
Version 1.0
Oct 27 2017.
Package List
NANO-ULT3 package includes the following items:
 1 x NANO-ULT3 single board computer with heatspreader
 1 x Audio cable
 1 x Power cable
 1 x RS-232 cable
 1 x SATA with power cable kit
 1 x One Key Recovery CD
 1 x QIG (Quick Installation Guide)
 1 x Utility CD
©2016 Copyright by IEI Integration corp.
All rights reserved.

2
Specifications
 SoC:
6th generation Intel® mobile ULT on-board SoC
Intel® Core™ i7-6600U (up to 3.4GHz, dual-core, 4MB cache,
TDP=15W)
Intel® Core™ i5-6300U (up to 3.0GHz, dual-core, 3MB cache,
TDP=15W)
Intel® Core™ i3-6100U (up to 2.3GHz, dual-core, 3MB cache,
TDP=15W)
Intel® Celeron® processor 3955U (up to 2.0GHz, dual-core,
2MB cache, TDP=15W)
 BIOS: AMI UEFI BIOS
 Memory:
Two 260-pin 2133/1866 MHz dual-channel DDR4 non-ECC
unbuffered SO-DIMMs (system max. 32 GB)
 Graphics Engine:
Intel® HD Graphics Gen 9 Engine with 16 low-power execution
units, supporting DX11/12, OpenGL 4.3/4.4 and OpenCL2.x,
ES 2.0
 Display Output:
Triple independent display
2 x HDMI (up to 4096x2160@24Hz)
1 x 18/24-bit dual-channel LVDS by CH7511B DP to LVDS
converter (up to 1920x1200@60Hz)
1 x iDP interface for HDMI, LVDS, VGA, DVI, DP (up to 4096 x
2304@60Hz) (colay with HDMI1)
 Ethernet:
LAN1: Intel® I219-LM PHY with Intel® AMT 11.0 supported
LAN2: Intel® I211-AT PCIe GbE controller
 External I/O Interfaces:
4 x USB 3.0
 Internal I/O Interfaces:
1 x 8 GB eMMC (optional)

3
1 x KB/MS (1x6 pin)
1 x RS-232/422/485 (2x5 pin, P=2.0)
1 x USB 2.0 (180° Type-A)
2 x USB 2.0 (2x4 pin, P=2.0)
2 x RS-232 (2x5 pin, P=2.0)
2 x SATA 6G/s with 5V SATA power connector (RAID 0,1)
 SMBus: 1 x SMBus (1x4 pin)
 Audio:
Realtek ALC662 HD codec
1 x Analog audio (2x5 pin)
 Front Panel:
1 x Power LED & HDD LED (1x6 pin)
1 x Power button (1x2 pin)
1 x Reset button (1x2 pin)
 LAN LED: 2 x LAN LED (1x2 pin)
 Expansion :
1 x Full-size PCIe Mini card slot (with SIM holder & mSATA
support)
1 x Half-size PCIe Mini card slot
*3855U belongs to Skylake ULT Base series CPU, PCIe signal
support only PCIe Gen 2
 Digital I/O: 1 x 8-bit digital I/O (2x5 pin)
 Fan Connector:
1 x CPU fan connector (1x4 pin)
1 x System fan connector (1x4 pin)
 Power supply:
12V only DC input
1 x Internal power connector (2x2 pin)
Support AT/ATX mode
 Power Consumption:
[email protected]A (Intel® Core™ i3-6100U CPU with two 8 GB
memory)

4
 Watchdog Timer:
Software programmable supports 1~255 sec. system reset
 Operating Temperature: -20°C ~ 60°C
 Storage Temperature: -30°C ~ 70°C
 Operation Humidity: 5% ~ 95%, non-condensing
 Dimensions: 115mm x 165mm
 Weight(GW/ NW): 850g/ 350g
Ordering Information
 NANO-ULT3-i7-R10:
EPIC SBC supports Intel® 14nm 6th Generation Mobile Core™ i7-
6600U (15W) on-board Processor (ULT) with HDMI/LVDS/iDP, Dual
PCIe GbE, USB 3.0, Dual PCIe Mini, SATA 6Gb/s, mSATA, COM,
Audio and RoHS
 NANO-ULT3-i5-R10:
EPIC SBC supports Intel® 14nm 6th Generation Mobile Core™ i5-
6300U (15W) on-board Processor (ULT) with HDMI/LVDS/iDP, Dual
PCIe GbE, USB 3.0, Dual PCIe Mini, SATA 6Gb/s, mSATA, COM,
Audio and RoHS
 NANO-ULT3-i3-R10:
EPIC SBC supports Intel® 14nm 6th Generation Mobile Core™ i3-
6100U (15W) on-board Processor (ULT) with HDMI/LVDS/iDP, Dual
PCIe GbE, USB 3.0, Dual PCIe Mini, SATA 6Gb/s, mSATA, COM,
Audio and RoHS
 NANO-ULT3-C-R10:
EPIC SBC supports Intel® 14nm 6th Generation Mobile Celeron®
3955U (15W) on-board Processor (ULT) with HDMI/LVDS/iDP, Dual
PCIe GbE, USB 3.0, Dual PCIe Mini, SATA 6Gb/s, COM,
Audio and RoHS

5
 NANO-ULT3-CE-R10:
EPIC SBC supports Intel® 14nm 6th Generation Mobile Celeron®
3855U (15W) on-board Processor (ULT) with HDMI/LVDS/iDP, Dual
PCIe GbE, USB 3.0, Dual PCIe Mini, SATA 6Gb/s, COM,
Audio and RoHS
 32000-023800-RS: PS/2 KB/MS cable, 135mm, P=2.0
 32000-070301-RS: Dual-port USB cable, 210mm, P=2.0
Jumpers setting and connectors
LABEL FUNCTION
ATX_AT1 Auto Power Button Setting
J_CMOS1 CMOS state setting
J_LCD_PWR1 LVDS Voltage Selection
J_HDMI_DP1 HDMI & DP mode selection
SW1 LVDS panel resolution selection
HDMI1, HDMI 2 HDMI Connector
USB_CON1, USB_CON2 External USB3.0 Connector
LAN1 LAN1 Connector
LAN2 LAN2 Connector
CN11 Front Panel Connector
KB/MS1 Keyboard/Mouse Connector
Audio1 Audio Connector
SATA1, SATA2 Serial ATA Connector
SATA_PWR1, SATA_PWR2
SATA Power Connector
CPU/FAN1 CPU Fan Connector
SYS/FAN1 System Fan Connector
INV1 LVDS Panel Backlight +12V Power Source
CN2 LVDS Connector
PWR_BTN1 Power Button Connector
PWR1, PWR2 Power Source Connector

6
RST_BTN1 Reset Button Connector
SMBUS_1 SMBUS Connector
SP1 Buzzer Connector
COM1, COM2, COM3 External Serial Port Connector
DP1 Internal Display Port Connector
DIO1 Digital I/O Connector
USB1, USB2 Internal USB 2.0 Connector
BAT1 BAT Connector
ME_FLASH1 ME Override Connector
CN1 PCIe Mini Card Slot (Half)
CN8 PCIe Mini Card Slot (Full Size)
SIM1 SIM Card Connector
J_HDMI_DP1: HDMI & DP mode selection
PIN NO. DESCRIPTION
Short A - B HDMI mode (default)
Short B - C DP mode
ATX_AT1: Auto Power Button Setting
PIN NO. DESCRIPTION
Short A - B ATX Power Mode (default)
Short B - C AT Power Mode
J_LCD_PWR1: LVDS Voltage Selection
PIN NO. DESCRIPTION
Short A - B +3.3 V (Default)
Short B - C +5 V
J_CMOS1: Clear CMOS Setup
PIN NO. DESCRIPTION
Open Normal Operation (Default)
Push Clear CMOS Setup

7
HDMI1, 2: HDMI Connector
PIN NO. DESCRIPTION PIN NO.
DESCRIPTION
1 HDMI_DATA2 2 GND
3 HDMI_DATA2# 4 HDMI_DATA1
5 GND 6 HDMI_DATA1#
7 HDMI_DATA0 8 GND
9 HDMI_DATA0# 10 HDMI_CLK
11 GND 12 HDMI_CLK#
13 N/C 14 N/C
15 HDMI_SCL 16 HDMI_SDA
17 GND 18 +5V
19 HDMI_HPD 20 HDMI_GND
21 HDMI_GND 22 HDMI_GND
23 HDMI_GND
SW1
:
LVDS
p
anel
r
esolution
s
election
* ON=0, OFF=1; Single=S, Dual=D
4-3-2-1 DESCRIPTION
0000 800x600 18bit S (default)
0001 1024x768 18bit S
0010 1024x768 24bit S
0011 1280x768 18bit S
0100 1280x800 18bit S
0101 1280x960 18bit S
0110 1280x1024 24bit D
0111 1366x768 18bit S
1000 1366x768 24bit S
1001 1440x960 24bit D
1010 1400x1050 24bit D
1011 1600x900 24bit D
1100 1680x1050 24bit D
1101 1600x1200 24bit D
1110 1920x1080 24bit D
1111 1920x1200 24bit D

8
KB/MS1: Keyboard/Mouse Connector
PIN NO.
DESCRIPTION PIN NO.
DESCRIPTION
1 VCC 4 KBDATA
2 MSDATA 5 KBCLOCK
3 MSCLK 6 GND
CN11: Front Panel Connector
PIN NO.
DESCRIPTION PIN NO.
DESCRIPTION
1 VCC 4 PWR_LED-
2 GND 5 HDD_LED+
3 PWR_LED+ 6 HDD_LED-
LAN1, LAN2: RJ45 LAN Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 LAN_MDI0+ 7 LAN_MDI2+
2 LAN_MDI0- 8 LAN_MDI2-
3 LAN_MDI1+ 9 LAN_MDI3+
4 LAN_MDI1- 10 LAN_MDI3-
USB_CON1, 2: External USB3.0 Connector
PIN NO. DESCRIPTION PIN NO.
DESCRIPTION
1 VCC 10 VCC
2 USB_DATA- 11 USB_DATA-
3 USB_DATA+ 12 USB_ DATA+
4 GND 13 GND
5 USB3_RX- 14 USB3_RX-
6 USB3_RX+ 15 USB3_ RX+
7 GND 16 GND
8 USB3_TX- 17 USB3_TX-
9 USB3_TX+ 18 USB3_TX+

9
INV1: 5-pin Header Inverter Connector
PIN NO.
DESCRIPTION PIN NO.
DESCRIPTION
1 LCD_BKLTCTL 2 GROUND
3 +12V 4 GROUND
5 BACKLIGHT ENABLE
CPU/FAN1, SYS/FAN1: Fan Connector
PIN NO. DESCRIPTION PIN NO.
DESCRIPTION
1 GND 2 +12V
3 FANIO1 4 PWM
Audio1: Audio Connector
PIN NO. DESCRIPTION
PIN NO. DESCRIPTION
1 LINE_OUTR 2 LINEIN_R
3 ANALOG_GND
4 ANALOG_GND
5 LINE_OUTL 6 LINEIN_L
7 ANALOG_GND
8 ANALOG_GND
9 MICIN1 10 MICIN2
SATA1, SATA2: Serial ATA Connector
PIN NO.
DESCRIPTION PIN NO.
DESCRIPTION
1 GND 5 RX-
2 TX+ 6 RX+
3 TX- 7 GND
4 GND
SATA_PWR1, 2: SATA Power Connector
PIN NO.
DESCRIPTION PIN NO.
DESCRIPTION
1
+5V 2 Ground

10
RST_BTN1: Reset Button Connector
PIN NO. DESCRIPTION PIN NO.
DESCRIPTION
1 RESET+ 2 RESET-
PWR1, PWR2: +12V Power Connector
PIN NO. DESCRIPTION PIN NO.
DESCRIPTION
1 GND 2 GND
3 +12V 4 +12V
PWR_BTN1: Power Button Connector
PIN NO. DESCRIPTION PIN NO.
DESCRIPTION
1 PWR_BTN+ 2 PWR_BTN-
CN2: LVDS Connector
PIN NO. DESCRIPTION PIN NO.
DESCRIPTION
1 GND 2 GND
3 A0P_L 4 A0M_L
5 A1P_L 6 A1M_L
7 A2P_L 8 A2M_L
9 CLK1P_L 10 CLK1M_L
11 A3P_L 12 A3M_L
13 GND 14 GND
15 A4P_L 16 A4M_L
17 A5P_L 18 A5M_L
19 A6P_L 20 A6M_L
21 CLK2P_L 22 CLK2M_L
23 A7P_L 24 A7M_L
25 GND 26 GND
27 +VCC_LCD_BEAD2
28 +VCC_LCD_BEAD2
29 +VCC_LCD_BEAD2
30 +VCC_LCD_BEAD2