Iget HomeGuard HGDVK-44402 User manual

Helpdesk / Technical Support
www.iget.eu/cs/helpdesk-centrum-cs
https://helpdesk.intelek.cz/

Heat-sensing HD CCTV Kit
Quick Start Guide - EN
Forthe latest, up-to-date manual, please visit
www.iget.eu
DETECTION
SMART
MOTION & HEAT TRIGGER ACCURATE ALERTS

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE THE COVER.
NO USER SERVICABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert
the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE
CAUTION: TO PREVENT ELECTRIC SHOCK, ENSURE THE PLUG
IS FULLY INSERTED INTO A MAINS SOCKET
1

DISCLAIMER
We reserve the right to revise or remove any content in this manual at any time. We do not warrant or assume any
legal liability or responsibility for the accuracy, completeness, or usefulness of this manual. The content of this
manual is subject to change without notice.
RECOMMENDATIONS
•AVOID DUSTY LOCATIONS:
•INSTALL IN VENTILATED SPACE:
•DO NOT EXPOSE TO MOISTURE:
•DO NOT DROP:
•DO NOT OPEN CHASSIS:
Excessive build-up of dust may cause the unit to fail.
Ensure adequate airflow around the DVR to prevent overheating.
Exposing the unit to water poses high risk of electric shock.
Doing so could damage internal components.
No user-serviceable parts inside.
TRADEMARKACKNOWLEDGEMENTS
•Internet Explorer™, Microsoft™&Windows™are registered trademarks of Microsoft Corporation.
•Apple™, iPhone™, iPad™and iTunes™are registered trademarks of Apple Computer, Inc.
•AndroidTM and Google Play™are registered trademarks of Google Inc
WARRANTY AND TECHNICAL SUPPORT
To help you make the most of this product you’ll find a host of information including full product manuals, FAQ,
troubleshooting guides and a support service if you have specific questions, available at our support website :
homeguardworld.com/support.
IMPORTANT SAFEGUARD
All lead-free products offered by the company comply with the requirements of the
European law of the Restriction of Hazardous Substances (RoHS) directive, which means
our manufacturing processes and products are strictly “lead-free” and without the
hazardous substances cited in the directive.
The crossed-out wheeled bin mark symbolizes that within the European Union the
product must be collected separately at the product’s end-of-life. This applies to your
product and any peripherals marked with this symbol. Do not dispose of these products
as unsorted municipal waste. Contact your local dealer for procedures for recycling this
equipment.
RoHS
conform
2

CONTENTS
CONNECTING YOUR SYSTEM
4
Introduction
Package Contents
DVR Layout
Connecting the DVR
Mounting the Cameras
Using Remote Control
Using the Mouse
5
6
7
9
10
11
12
BASIC OPERATION
13
Start-up Wizard
Main Interface
PIR Setup
Record
Playback
14
17
19
20
21
CONNECTING SMART DEVICE
22
Before Start
Get the App
User Interface
For iPhone
For iPad
For Android Phone
23
23
24
25
26
27
CONNECTING TO PC&MAC
28
Homeguardsafe Software for PC & Mac
Remote Access via Web Client
Cloud Access
29
32
35
TECHNICAL SUPPORT
36
Technical Specifications
Technical Q&A
Warranty & Support
Camera Installation Template
37
38
39
40
3

CONNECTING
YOUR SYSTEM 1
4

1.1 Introduction
Congratulations on your purchase of this Homeguard Hybrid DVR. Homeguard offers a complete CCTV solution for
home or office security, featuring high quality cameras, easy setup and configuration, motion detection and network
connectivity.
This system features:
•H.264 Video compression and G.711 audio compression
•Support CVBS, AHD, TVI, CVI and IPC
•Provides a convenient User Interface
•4/8 CH Composite Input Connectors
•Supports 1080p/720p/960H/D1/CIF recording formats
•With the network specific codec, network transfer enabled regardless of the recording conditions
•Hard Disk overwrite function
•Mass storage hard disk backup through high-speed USB 2.0
•Simultaneous Record and Playback of 4/8/16-channel video data
•Various Search Modes (Search by Time, Event, Backup and Motion Detection)
•Various Recording Modes (Manual, Scheduled Recording)
•Remote Monitoring function by Network Viewer and Mobile Viewer
5

1.2 Package Contents
Please unwrap the product, and place the product on a flat place or in the place to be installed.
Please check the following contents are included in addition to the main unit.
•The appearance of the components may differ from the image shown.
•Accessory category and quantity may differ depending on sales region.
Check the contents of your DVR package against this checklist. If anything is missing or damaged, please do not use
the system, and inform your supplier as soon as possible.
SATA Cable
(for models having no installed HDD)
Hybrid DVR Power Adapter Mouse
User Manual / SoftwareRemote Control / Battery (AAA x 2) Quick Start Guide
USB
HDD NET PWR
1080P HD DIGITALVIDEO RECORDER
Ethernet Cable HDD Fixing Screw
This manual covers both 4 channel and 8 channel versions of the Homeguard DVR kits model:
HGDVK-44402 / 44404 / 84402 / 84404 / 84408 / 164408 / 164416.
NOTE
6

1.3 DVR Layout
Rear Panel
4CH DVR
DVR Kits Model: HGDVK-44402 / 44404
8CH DVR
DVR Kits Model: HGDVK-84402 / 84404 / 84408
16CH DVR
DVR Kits Model: HGDVK-164408 / 164416
HDMI
VGA
VIDEO INPUT
1
2
3
4
5
6
7
8
9
1012
11
14
13
16
15
12V
13
4 2
AUDIO
INPUT
AUDIO
OUTPUT LAN
RS485
+ -
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK
DO NOT OPEN COVERS. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING : TO PREVENT FIRE OR SHOCK HAZARD. DO NOT
EXPOSE UNITS NOT SPECIFICALLY DESIGNED
FOR OUTDOOR USE TO RAIN OR MOISTURE.
HDMI VGA
RS485
+ -
LAN
3 1
13
4 42 2
VIDEO
INPUT
AUDIO
INPUT
AUDIO
OUTPUT
12V
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK
DO NOT OPEN COVERS. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING : TO PREVENT FIRE OR SHOCK HAZARD. DO NOT
EXPOSE UNITS NOT SPECIFICALLY DESIGNED
FOR OUTDOOR USE TO RAIN OR MOISTURE.
1 2 3 4 5 6 7 8 9
132 5 4 7 68 9
HDMI VGA
RS485
+ -
LAN
5 7
6
3
4
1
2 8
VIDEO INPUT
12V
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK
DO NOT OPEN COVERS. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING : TO PREVENT FIRE OR SHOCK HAZARD. DO NOT
EXPOSE UNITS NOT SPECIFICALLY DESIGNED
FOR OUTDOOR USE TO RAIN OR MOISTURE.
AUDIO
OUTPUT
31
2 4
AUDIO
INPUT
1 23 4 5 6 7 8 9
7

Front Panel
USB
HDD NET PWR
1080P HD DIGITAL VIDEO RECORDER
10 11 12
13 14
Part Names Functions
RCA Audio Output: For speakers
4x / 8x / 16x BNC Video Connectors: For each camera input
4x RCA Audio Connectors: For each audio input*
HDMI Output: For most modern TVs
VGA Output: For most monitors
USB Ports: For USB mouse and external storage
LAN Port: To connect your DVR to the network
RS485: Connect to PTZ devices
Power Connector: To power the DVR
HDD LED: Flashes when the HDD is in use
Network LED: Flashes when the internet is connected
Power LED: Indicates the DVR is turned ON when lit
IR Receiver: Receives the signal from the remote control
USB Ports: For USB mouse and external storage
1
2
3
4
5
6
7
8
9
10
11
12
13
14
8

1
2
3
4
5
6
Connect the camera's video input (yellow) and power supply (red) connectors to the BNC extension cables. Then
connect the BNC video input (yellow) to the video input port on the rear panel. (Repeat Step 1 for the remaining
cameras.)
Connect the mouse to the USB Port on the front or back panel of the DVR.
Depending on the monitor port, connect the HDMI or VGA cable from your monitor to the HDMI or VGA Port on
the rear panel.
Connect the camera's power supply (red) to the power splitter. Then connect the other end of the power splitter
to the power adapter for Cameras and plug in the adapter to a wall outlet. (Repeat Step 2 to connect the camer-
as to the second set of power splitter and power adapter.)
Connect the power adapter for DVR to the DC 12V port on the rear panel and the power plug into a wall outlet.
The DVR will automatically power on and the startup wizard will appear on your monitor.
Connect one end of the Ethernet cable into your router’s LAN port, and the other end of the cable to the Ethernet
port on the rear panel.
1.4 Connecting the DVR
HDMI VGA
RS485
+ -
LAN
5 7
6
3
4
1
2 8
VIDEO INPUT
12V
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK
DO NOT OPEN COVERS. NO USER SERVICEABLE
PARTSINSIDE. REFER SER VICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING : TO PREVENT FIRE OR SHOCK HAZARD. DO NOT
EXPOSE UNITS NOT SPECIFICALLYDESIGNED
FOR OUTDOOR USE TO RAIN OR MOISTURE.
AUDIO
OUTPUT
31
2 4
AUDIO
INPUT
1
2
53 4
6
9

1
2
3
1.5 Mounting the cameras
Connect the video output and power input connection on the camera to the corresponding connections on the
supplied video & power cable.
Connect the supplied power splitter to the other end of the video & power cable. This provides power to multiple
cameras using a single power adapter.
Connect the other end of the power splitter to the supplied power adapter then connect the power adapter to
a power outlet.
TIP Each Homeguard camera is supplied with a mounting kit for attaching it to a wall. Before you affix the
camera in position, please ensure the cable is of adequate length to reach the DVR.
1
2 3
Power Input
Video Output
Twist to lock
connectors
Video Input Video & Power Cable
Connect this to the DVR
Power Splitter connects herePower Output
Power Adapter
Power Adapter
connects here
Power Splitter
Video & Power Cable
connects here
Connect to a spare
wall socket
10

Part Names Functions
1-8
9, 0
ALL
Menu
Mute
Submenu
▲
Sel
◄►
▼
◄◄
►►
►
●
■
▌▌
Numeric keys. Press to display channel 1~8
Numeric keys
Press to display all channels. Multiple display mode
Press to enter or exit the Main Menu
Mute On/off
Go to submenu
Up arrow key; Volume increase
Press to enter the selected menu item and edit the setting
Left/Right key; Decrease/increase parameter value of control bar
Down arrow key; Volume decrease
Press to rewind during video playback
Press to fast forward during video playback
Press to play recorded video or enter the recording search menu
Press to start manual recording
Press to stop manual recording or stop the video playback
Press to pause the video playback or enter frame-playback mode
1.6 Using Remote Control
11

Left Button:
•Click to select menu options.
•During live viewing in split-screen view, double-click on a channel to view it in full-screen. Double-click the
channel again to return to split-screen viewing.
•Click upon a channel on Live Viewing screen to open Camera Quick Tool bar.
•Click and hold to drag sliders and scales on menu mode
Right Button:
•Click once to open the Task bar on the Live Viewing screen.
•In menus, click to go back / close menus.
Scroll Wheel:
•In menus, scroll to move up / down through the menu content.
•While hovering over the volume control wheel, scroll to turn system volume up / down.
1 2
3
1.7 Using the Mouse
1
2
3
12

2BASIC
OPERATION
13

Create a Password
Please create a user name and password
for your device. Password MUST be 8
characters long.
1
Network
In DHCP mode the router will automatically
assign an IP address to DVR.
If the DVR fails to obtain an IP address, refer
to the DVR Router Guide. If the problem
still cannot be resolved, contact technical
support.
3
Use the on-screen keyboard to input text,
numbers and characters. Click to
change from lower-case to upper-case
Don’t forget to write down your password: ___ ___ ___ ___ ___ ___ ___ ___.
CAUTION
2.1 Start-up wizard
Start Wizard
After DVR startup is completed, the start-up
wizard will be displayed. Click "Start
Wizard".
2
14

Date / Time
Set the date, time, NTP, DST.
Resolution
Select the resolution for the VGA output or
HDMI output of your monitor.
4
Disk
New hard drive(s) connected must be
formatted before use. Upon connection, it
will indicate to format new hard drive.
Click on "Select" to select the unformatted
hard drive. Click on "Format HDD" to pop
up the user login window and enter the
password to log in. A notice window will
indicate "Entire Data Will Be Erased. do
You Want To Continue?". Click "OK" to
format the disk. When the progress bar is
complete, the formatting process is
completed.
5
6
15

Mobile
If you scan a QR code using Homeguardsafe,
the device ID displayed in the DVR will be
automatically reflected in the Mobile Viewer
ID, and you can use the Mobile Viewer
immediately by entering the ID / password
of the DVR.
7
Summary
Shows system and network status of DVR.
8
Click on “Finish” to finish setting of startup wizard.
You can click on “Don’t show this window next time” if you do not wish to have the wizard setting to appear
next time.
9
16

2.2 Main Interface
Part NamesItems Functions
Channel Name
PIR
Motion Detection
Manual Recording
Manual Capture
Instant Playback
PTZ
Zoom
Color Setting
Display channel name
This icon appears when the camera has PIR detection
This icon appears when the camera has detected motion
Enable or disable manual recording
Make a snapshot of current video
Playback of the last five minutes of the video
Click to enter PTZ control panel
Hold and drag mouse cursor to select a frame of current video to zoom in
Set hue, brightness, contrast and saturation of current channel
1
10 11 12 13 14 15 16 17 18 19
20
21
22
23
24
25
1
2
3
4
5
6
7
8
9
4 5 6 7 8 9
32
17

Part NamesItems Functions
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Main Menu
4-Channel Layout
More Layout
Auto SEQ
Play
Audio
Stream Switch
Preview Policy
Connection State
Manual Mode
System
Video Loss
Admin
Search
Setup
Lock Screen
Shutdown
Access the main menu
Display four channels of video
Click to choose more layouts for live view
Press this button to switch the screen mode in sequence
Replay video recorded
Click to adjust audio volume
Click to switch all IP channels between main stream and sub stream
Click to switch among real-time, balanced, or smooth view
Display the network connection status
Set manual recording mode
System Information
Camera is off-line
To switch user
Search & Playback
Click to access DVR System Setup menu
Lock & unlock screen
Shutdown, reboot & logout the system
18