II Morrow Inc. Apollo SL60 User manual

Airspace Setup
Alerts
Autonav Time
Nav Mode Display
Pages
Magnetic Variation
Flight Timer Trigger
Direct-To Clears
CDI Scaling
Flight
Plans Waypoint Database Comm
Radio
Info
Nav
Info System Info GPS
Sensor
System Functions
Date & Time
Software Versions
Test Display
Owner Info
Satellite Search
Status
GPS Date & Time
GPS Normal Reset
Software Version
RF Signal Level
Audio Noise Level
Intercom Squelch
Sidetone Level
Create User Wpt
by Lat/Lon
Create User Wpt
by Rad/Dist
Delete User Wpt
Modify User Wpt
Delete Wpt
Comment
Access Database
Active Flight Plan
Flight Plan 1
Flight Plan 2
*
*
*
Flight Plan 10
Create New Flight
Plan
Nav Pages
Emergency Search
Parallel Track
GPS Position
Countdown Timer
From/To/Next Wpt
Nav Functions
USA 800-525-6726
Canada 800-654-3415
International [phone]
2345 Turner Rd., S.E.
Salem, OR 97302
Direct-To
1. Press Direct-To.
2. Use Large & Small
knobs to select wpt.
3. Press ENT.
Apollo SL60
Quick Reference Guide
FAX [phone]
http://www.iimorrow.com
Comm Radio Functions
SELECT FREQ
1. Press COM.
2. Turn LARGE knob
for MHz.
3. Turn SMALL knob
for kHz.
FREQ MONITOR
1. Press COM twice.
2. Small "m" shows
Standby freq.
STORE FREQ
1. Press ENT to
select Standby
for storing.
2. Press ENT again
to store Standby.
LARGE KNOB
With no cursor flashing,
scrolls to next page.
With cursor flashing,
moves cursor to next
changeable field.
SMALL KNOB
With cursor flashing,
changes flashing field
or character.
Displays next sub-page
when diamond shows on
right side of display.

1. Press SYS. Turn LARGE knob to the
Flight Plan page and then press ENT.
2. Turn the LARGE knob to the "Create
a New Flightplan" page. Press ENT.
3. To enter a new plan name, press SEL.
4. Turn the SMALL knob to select characters.
Turn the LARGE knob to move to the next
character.
5. Press ENT when the name is complete.
6. Turn the SMALL knob to start inserting
waypoints into the flight plan. At the INS?
prompt, press ENT.
7. Turn the SMALL knob to select the first
character. Turn the LARGE knob cw to move
to the next character.
8. Use the SMALL and LARGE knobs to select
the waypoint name and then press ENT.
9. The INS? prompt will flash for the next
waypoint. Press ENT and repeat steps 6-8
until finished.
10. Press SEL to stop editing
your flight plan.
1. Press SYS. Turn LARGE knob to the
Wpt Database page and then press ENT.
2. Turn the LARGE knob to the Access
Database page and press ENT.
3. Turn the LARGE knob to the desired
character and turn the SMALL knob to
select characters.
4. Press INFO.
5. Turn the SMALL knob to view information.
6. Press INFO again to exit.
Creating a Flight Plan Finding Info On Any Waypoint
1. Press MSG twice.
2. Turn the LARGE knob to change Wpt type.
3. Turn the SMALL knob to view nearby
waypoints. .
4. Press Direct-To and then ENT.
Emergency Search
1. Press SYS. Turn LARGE knob to
"Access Waypoint Database" and
press ENT.
2. Turn LARGE knob to the Create
User Wpt By Lat/Lon page and then
press ENT.
3. Use the SMALL to select characters
and turn the LARGE knob to move
the cursor to set the waypoint name.
4. Continue to select the necessary
characters for the Lat/Lon and
runway length.
5. Press ENT when finished.
Creating A New Waypoint
II MORROW
VISIONARY THINKING TODAY
P/N 561-0239-00
March 1997
1997 by II Morrow Inc.
Printed in the U.S.A.
All Rights Reserved
1. Press SYS. Turn LARGE knob to the
Flight Plan page and then press ENT.
2. Turn the LARGE knob to the desired
active flight plan and press SEL.
3. Turn the SMALL knob to select the
desired option and press ENT.
Activating a Flight Plan