II Morrow Inc. Apollo SL60 User manual

Airspace Setup Alerts Autonav Time Nav Mode Display Pages Magnetic Variation Flight Timer Trigger Direct-To Clears CDI Scaling
Flight
Plans Waypoint
Database Comm
Radio
Info
Nav
Info System
Info GPS
Sensor
System Functions
Date & Time Software Versions Test Display Owner Info
Satellite Search Status GPS Date & Time GPS Normal Reset
Software Version RF Signal Level Audio Noise Level Intercom Squelch Sidetone Level
Create User Wpt by Lat/Lon Create User Wpt by Rad/Dist Delete User Wpt Modify User Wpt Delete Wpt Comment Access Database
Active Flight Plan Flight Plan 1 Flight Plan 2
* * *
Flight Plan 10 Create New Flight Plan
Nav Pages Emergency Search Parallel Track GPS Position Countdown Timer From/To/Next Wpt
Nav Functions
USA 800-525-6726
Canada 800-654-3415
International [phone]
2345 Turner Rd., S.E.
Salem, OR 97302
Direct-To
1. Press Direct-To. 2. Use Large & Small
knobs to select wpt.
3. Press ENT.
Apollo SL60
Quick Reference Guide
FAX [phone]
http://www.iimorrow.com
Comm Radio Functions
SELECT FREQ 1. Press COM. 2. Turn LARGE knob
for MHz.
3. Turn SMALL knob
for kHz.
FREQ MONITOR 1. Press COM twice. 2. Small "m" shows
Standby freq.
STORE FREQ 1. Press ENT to
select Standby for storing.
2. Press ENT again
to store Standby.
LARGE KNOB With no cursor flashing, scrolls to next page. With cursor flashing, moves cursor to next changeable field.
SMALL KNOB With cursor flashing, changes flashing field or character. Displays next sub-page when diamond shows on right side of display.

1. Press SYS. Turn LARGE knob to the
Flight Plan page and then press ENT.
2. Turn the LARGE knob to the "Create
a New Flightplan" page. Press ENT.
3. To enter a new plan name, press SEL. 4. Turn the SMALL knob to select characters.
Turn the LARGE knob to move to the next character.
5. Press ENT when the name is complete. 6. Turn the SMALL knob to start inserting
waypoints into the flight plan. At the INS? prompt, press ENT.
7. Turn the SMALL knob to select the first
character. Turn the LARGE knob cw to move to the next character.
8. Use the SMALL and LARGE knobs to select
the waypoint name and then press ENT.
9. The INS? prompt will flash for the next
waypoint. Press ENT and repeat steps 6-8 until finished.
10. Press SEL to stop editing
your flight plan.
1. Press SYS. Turn LARGE knob to the
Wpt Database page and then press ENT.
2. Turn the LARGE knob to the Access
Database page and press ENT.
3. Turn the LARGE knob to the desired
character and turn the SMALL knob to select characters.
4. Press INFO. 5. Turn the SMALL knob to view information. 6. Press INFO again to exit.
Creating a Flight Plan Finding Info On Any Waypoint
1. Press MSG twice. 2. Turn the LARGE knob to change Wpt type. 3. Turn the SMALL knob to view nearby
waypoints. .
4. Press Direct-To and then ENT.
Emergency Search
1. Press SYS. Turn LARGE knob to
"Access Waypoint Database" and press ENT.
2. Turn LARGE knob to the Create
User Wpt By Lat/Lon page and then press ENT.
3. Use the SMALL to select characters
and turn the LARGE knob to move the cursor to set the waypoint name.
4. Continue to select the necessary
characters for the Lat/Lon and runway length.
5. Press ENT when finished.
Creating A New Waypoint
II MORROW
VISIONARY THINKING TODAY
P/N 561-0239-00
March 1997
1997 by II Morrow Inc.
Printed in the U.S.A.
All Rights Reserved
1. Press SYS. Turn LARGE knob to the
Flight Plan page and then press ENT.
2. Turn the LARGE knob to the desired
active flight plan and press SEL.
3. Turn the SMALL knob to select the
desired option and press ENT.
Activating a Flight Plan