IKA IKA-KURVE User manual

Hood mounting bracket
Chimney top
Chimney bottom
Control panel
Glass door
Hood body
Oil cup

≥Φ185
980~ 1080
109
3xΦ10
109
810

170
170

Hand wave sensor Hand wave sensor
Clock setting
When hood standby, press “ ”could start to set the clock. First setting is hours,
press “ ” again is mins, the third press is confirm. “ ” is up and “ ”is down.
Time delay function
When fan speed or illumination is working, press“ ”and the hood will be off
after 3 mins. You could keep pressing “ ” to choose 3mins/6mins/9mins and
cancel. When the hood turned off, it will count down 5s for close the door.
Stir-fry function
Press “ ”to use stri-fry function for 3mins. Press “ ” again for stop it and back
to normal fan speed.
Hand wave sense function
●When the hood is turn off, wave hand “ ” left to right front of hood (as pic (1)
shows), turn on the hood and lamp.
●When the hood is working, wave hand “ ” right to left (as pic(2) shows), turn off
the hood and lamp.
●When the hood is working, wave hand “ ” left to right front of hood (as pic (1)
shows), turn on the stri-fry function.
●When the hood in stri-fry function, wave hand “ ” left to right front of hood (as
pic (1) shows) switch to normal fan speed mode.
●When the hood in delay function, wave hand “ ” left to right front of hood (as pic
(1) shows) to turn off delay function
●Press “ ” and “ ” in the same time for 1s, can turn on/off Hand wave sense
function with “beep” sound.
Pic(1)
Pic(2)
Left Right
Left Right
Hand wave sensor Hand wave sensor
Hand wave sensor Hand wave sensor