IKA IKA-LEXINGTON User manual

20
19
9
16
13
13
10

IKA-MUNICH IKA-DRESDEN
288W
1600 1800
70dB 70dB
3.0
2 2
495
4
IKA-MUNICH IKA-DRESDEN

IKA-DRESDEN
Inner chimney
Outer chimney
Switch control board
Glass panel
Hood assembly
LED light
Oil collector
805
Inner chimney
Outer chimney
Switch control board
Glass panel
Hood assembly
Oil collector
Filter LED light
IKA-MUNICH
396
355
306
895

10

11
IKA-DRESDEN
Position:
Find out the fixed place and drill 4 holes with diameter of 10mm
and 50mm depth.
(The distance between the bottom of cooker hood to cooktop is
300mm, which is the best effect to absorb smoke)
Hang strip installation:
Insert 4 anchors into the holes and tighten the
hang strip with screws.
Exhaust pipe installation:
Fix the exhaust pipe and air outlet in clockwise
direction and then throw out to the other end of
pipe toward outside or public channel.
Anchor
Screw
Hang strip
Exhaust pipe
Air outlet
12
IKA-MUNICH
Position:
Find out the fixed place and drill 4 holes with diameter of 10mm
and 60mm depth.
Anchor
Screw
Hang strip
Hang strip installation:
Insert 4 anchors into the holes and tighten the
hang strip with screws.
Exhaust pipe
Air outlet
Exhaust pipe installation:
Fix the exhaust pipe and air outlet in clockwise
direction and then throw out to the other end of
pipe toward outside or public channel.
Hand the cooker hood and make sure ist in level, and screw up cooker hood with
hand strip toward the wall, to avoid falling down.
680-730

1413

15
IKA-MUNICH
IKA-DRESDEN
16

17 18
Sensor zone-Left Heat clean LED light Stir-fry/speed On/off/delay Sensor zone-Right
Sensor by gesture
a). When hood is on standby, move hand from left to right, to start up
the cooker hood with light on.
b). When hood is working, move hand from right to left, to shut up the
hood.
c). When hood is working, move hand from left to right, to adjust speed
“High-Stir fry - Low”.
d). When hood is under the condition of delay, move hand from left to
right(as picture 1), to exit the delay state.
e). Touch icon “ ” and “ ” for 3 seconds, to turn on or off the sensor
touch control; “n” will flash on the screen for 3 times if sensor touch
is on; if it is off,“F” will flash on the screen for 3 times.
IKA-MUNICH & IKA-DRESDEN
Left Right
Fig. 7
Sensor zone -Left Sensor zone -Right
Fig. 8
Sensor zone -Left
Left Right
Sensor zone -Right
When hood is in stand by, touch for one second to turn on the fuction
of heat-clean. Heat-clean will be working 10 minutes, and 1 minute
at high speed.
Touch this icon to turn on or turn off the light.
When hood is on standby, touch this icon to adjust the speed
“High - Stir fry - Low”. Only the stir-fry fuction will work for 3 minutes, then
work at high speed when stir-fry is over.
When hood is in standby, touch this icon to turn on the cooker hood;
again, turn off the hood. Touch this icon when hood is working, the hood
will finsih working within 1 minute, with light off.

2019
(For model IKA-NESTON, IKA-MUNICH and IKA-DRESDEN)
Activated Carbon for Option
lf using activated carbon for IKA-NESTON, please take down the chimney
cover,then put the buckle of activated carbon aiming to nutson the cabinet,
push it in a counter-clockwise direction,till the carbon panel is fixed well.
Counter-clockwise
rotation