IKA IKA-LEXINGTON User manual

8
11
12
14
17
18

IKA-BADEN
IKA-BADEN
5
5
1

IKA-BADEN
Outer chimney cover
Switch control board
LED light
Front panel glass Oil collector
Upper panel
glass assembly
Hood assembly
Sliding glass
assembly
Inner chimney cover

IKA-BADEN
Anti-drop bracket
Exhaust pipe

IKA-BADEN
High
Middle
Low
Heating
element
Driving rod

IKA-BADEN
Light/oil removal key Stir fry key On/off key Quick key Slow key Sensor zone-right
a). When hood is on standby, move hand from left to right, to start up
the cooker hood with light on.
b). When hood is working, move hand from right to left, to shut off the
hood.
c). When hood is working, move hand from left to right, to adjust speed
“High-Stir fry - Low”.
d). When hood is under the condition of delay, move hand from left to
right(as picture 1), to exit the delay state.
e). Touch icon for 3 seconds, to turn on or off the sensor touch control;
“n” will flash on the screen for 3 times if sensor touch is on; if it is off,
“F” will flash on the screen for 3 times.
Touch the oil removal icon for 3 seconds in the shutdown state, the
indicator light of the oil removal icon flashes, and the oil removal
function starts to work. After the heating module works for 6 minutes,
the fan runs at slow speed for 3 minutes. The hood will automatically
turn off after degreasing is completed. If you want to cancel the oil
removal function in halfway, long touch the oil removal icon or the on/off
icon again.
Touch the stir fry key once in the standby state, the stir fry key indicator
flashes, the hood enters the stir fry state for 2 minutes, and the fan
switches to fast gear after 2 minutes.
Touch the quick key once in standby mode, the fan will work in fast gear,
if you want to turn off the fan, please press the power key.
Touch the slow key once in standby mode, the fan will work in slow gear,
if you want to turn off the fan, please press the power key.