Ikan ELE-EV3-FFDSLR User manual
What’s Included
QUICKSTART GUIDE
1 x 12"15mm Aluminum Rods
1 x EV3 Baseplate
1 x Shoulder Pad
1 x Weight Bag
2 x 18"15mm Aluminum Rods
2 x Cross Blocks
2 x EV3 Grip Handles
1 x FG Follow Focus Cine-Kit (ELE-FGK)
ELE-EV3-FFDSLR
EV3 Flyweight DSLR Shoulder Rig & Follow Focus Kit
www.ikancorp.com 713.272.8822
CHECKED BY
Rig Assembly
1. Slide a pair of 18-Inch 15 mm
rods into the EV3 Baseplate.
Lock them into place.
4. Attach one EV3 Handle to each side of
the 15 mm crossbar. Adjust each to the
desired position, and lock them into place.
2. Attach the cross blocks to the opposite
end of the 15 mm rods. Keep them loose
until you finish step 3.
3. Slide the additional 12-Inch 15 mm rod through the
bottom of the cross blocks. Once assembled, lock the
cross blocks securely into place using the thumbscrews.
Rig Assembly
6. Attach the counterweight bag by sliding the loop
over and onto the weight plate located on the back
end of the shoulder pad.
7. To secure the counterweight bag, use
the included strap to loop and tighten it
onto the weight plate.
5. Mount the shoulder pad to the back
end of the 18-Inch 15 mm rods. Adjust the
shoulder pad to the desired position, and
lock it into place.
Getting to Know your Follow Focus
Reaching Out
The included 17"FG Follow Focus Whip
features vinyl covering and a crank
stability grip for smooth control.
Utilizing a standard ¾"square
connector, the FG Whip provides
leverage over distance and
smoother focus pulls all around.
Crank It Up
Our 2.3 FG Follow Focus Crank Knob provides
rapid focus, allowing you to move from focus
mark to focus mark at a high rate of speed.
Fitted with standard size square connector, the
FG Crank Knob offers fast and accurate control.
Get It In Gear
Also in the box is a pair of 2.5 to 4.25” diameter
adjustable zip lens gears. Complete with two
no-scuff, non-slip gear liners; your DSLR lens is
protected and ready to pull focus.
Getting Started
Adjust FG Follow Focus vertically to slide
away or towards the lens, depending on
the barrel width.
This is an example of the basic completed
Follow Focus application.
Rig Specifications
Follow Focus Specifications
Shipping Specifications
Full Rig Assembly Specifications
Dimensions
Weight 4.89 lbs
Full Rig Assembly Specifications
Dimensions 12.25 x 7 x 4.375 In.
Weight 1
Shipping Specifications
Shipping Dimensions 22 x 16 x 12 In.
Shipping Weight 14 lbs
Cross Block Specifications
Weight 0.23 lbs
Rod Compatibility 15 mm
Quantity 2
Material Aluminum
Shoulder Pad Specifications
Weight 1.32 lbs
Weight Bag Specifications
Weight 0.21 lbs
EV3 Grip Handle Specifications
Weight 0.59 lbs
Grip Length 4 In.
Grip Diameter 30 mm
Quantity 2
Material Rubber / Aluminum
EV3 Baseplate Specifications
Weight 1.15 lbs
Baseplate Type Quick Release
Rod Compatibility 15 mm
Rod Spacing 60 mm
Tripod Mounting 4 x 1/4"-20 Threaded Holes
4 x 3/8"-16 Threaded Holes
1 x 1/4"-20 Threaded Screw
Camera Compatibility DSLR, Mirrorless DSLR, Micro 4/3, Small Camcorders
Material Aluminum
Rod Specifications 18 Inch 12 Inch
Rod Type Standard Standard
Rod Diameter 15 mm 15 mm
Rod Length 18 In. 12 In.
Weight 0.22 lbs 0.14 lbs
Quantity 2 1
Material Aluminum Aluminum
Learn More
More dynamic information at official website: www.ikancorp.com
Support
CONDITIONS OF WARRANTY SERVICE
• Free service for one year from the day of purchase if the problem is caused by manufacturing errors.
• The components and maintenance service fee will be charged if the warranty period is expired.
Free Service will not be Provided in the Following Situations:(*Even if the product is still within the warranty period.)
• Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.
• Damage caused by natural disaster, abnormal voltage, and environmental factors, etc.
©2015 ikan Corporation. All rights reserved
Table of contents
Other Ikan Fitness Equipment manuals
