Ikan VX9e-DK User manual

VX9e-DK
VX9e Deluxe Kit QUICKSTART GUIDE
www.ikancorp.com
CONDITIONS OF WARRANTY SERVICE
• Free service for one year from the day of purchase if the problem is caused by manufacturing errors.
• The components and maintenance service fee will be charged if the warranty period has expired.
Free Service will not be Provided in the Following Situations: (* Even if the product is still within the warranty period.)
• Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.
• Damage caused by natural disaster, abnormal voltage, and environmental factors etc.
3903 Stoney Brook Dr. Houston TX 77063
1.713.272.8822
[email protected]
© 2010 ikan Corporation. All right reserved
What’s included
Checked by
 1 x VX9e Monitor
 1 x AC Adapter
 1 x SM201 Shoe Mount
 1 x DV Battery, Battery Plate
& Changer (Check one)
BP2-S Sony "L" Series
BP2-C Canon "900" Series
BP2-P Panasonic "D54" Series

www.ikancorp.com 713-272-8822
VX9e-DK
VX9e Deluxe Kit QUICKSTART GUIDE
123 4 5 6 7 8910 11 12 13 14
1
Power Switch
Power ON / OFF
Power Indicator Light
When the power is ON, the LED green lights up.
SDI Selection Switch
Serial digital interface input (HD/SD compatible)
VIDEO Selection Switch
Video input
HDMI Selection Switch
High-Denition Multimedia Interface input
Y/C Selection Switch
SVHS input
YPbPr Selection Switch
Analog component or RGB input
F1 and F2 Buttons
Function key actions are selected in the menu.
ASPECT/EXIT Selection Button
Aspect: 16:9, 4:3, Full
In MENU, it is to exit the menu.
MENU Knob
It is to display menu, select settings, and adjustments.
(Push the knob to select, turn the knob to adjust settings.)
BRIGHT/R Knob
1: Adjust brightness 0 - 60 (30)
2: Adjust red channel
CONTRAST/G Knob
1: Adjust contrast 0 - 60 (30)
2: Adjust green channel
CHROMA/B Knob
1: Adjust chroma 0 - 60 (30)
2: Adjust blue channe
TINT/SHARPNESS Knob
1: Adjust tint 0 - 60 (30)
2: Adjust sharpness 0 - 60 (30)
2
3
4
5
6
7
8
9
13
12
11
10
14
VX9
ON OFF
SDI HDMI
VIDEO
Y/C
YPbPr
F1
F2
ASPECT/
EXIT MENU BRIGHT/
R
CONTRAST/
G
CHROMA/
B
TINT/
SHARPNESS
User programmable function buttons.
For quick access, the user may
program the F1 and F2 buttons to
enable frequently accessed monitor
features. Via the main monitor
conguration menu, either button may
be assigned to perform the following
functions: Window 1, Window 2, HV
delay, Blue Gun, and Pixel to Pixel, .

www.ikancorp.com 713-272-8822
POWERING THE MONITOR
1. Plug the AC power adapter into the power input jack (See rear view diagram or above).
2. Attach the DV battery plate on the slot, and connect DV battery to the plate.
3. Connect a pro battery using the optional pro battery plate and then plugging that plate with the power tap cable into
the DC-In connector. The pro battery plate kits (PBK17-S or PBK17-A) allow you to go into the eld using standard
V-Mount or Gold-Mount batteries.
DIGITAL TO ANALOG CONVERSION [SDI > YUV]
The monitor can convert digital SDI signals to Analog YUV. A signal from the SDI will be displayed on the YPbPr analog
outputs. This is a straight digital to analog conversion only. There is no up converting, down converting or standards
conversion available in this feature. This feature works in one direction SDI to analog. It will not work in reverse.
6 7
+
+
CAUTION: TURN OFF POWER
BEFORE ADJUSTING
SWITCHES
VIDEO
Y/C
Y
Pb
Pr
SDI
IN
DC 12V-20V
DC 12V - 20V
OUT
HDMI
+ +
1
HDMI terminal
HDMI input only
VIDEO terminal (BNC)
IN : Composite signal input terminal
OUT: : Input signal through-out terminal
Y/C terminal
IN : SVHS signal input terminal
OUT: : Input signal through-out terminal
YPbPr terminal (BNC)
IN : Component signal input terminal
OUT: : Input signal through-out terminal
SDI (HD/SD) terminal (BNC)
IN : SDI input terminal - 1.5G
OUT: : Input signal through-out terminal (Reclock)
DC 12V-20V power terminal
Standard DC Connection
DC 12V-20V power terminal
XLR DC Connection
Vesa 100mm Mount Holes
Threaded for M4x.07 screws. Use to attach pro battery
plate adapter or for mounting third party vesa mounts.
USB terminal
For factory service use only
¼-20 Threaded insert (on four sides of monitor)
Mounting Monitor
DV Battery Plate Slot
Mounting ikan DV battery plate
2
3
4
5
6
7
8
9
11
10
1
2
3
4
5
6
7
8
91011
11
**NOTE – The user must turn the
monitor off before making changes to
the DIP switches. Failure to do so may
damage the monitor or make the
monitor unusable.
VX9e-DK
VX9e Deluxe Kit QUICKSTART GUIDE

www.ikancorp.com 713-272-8822
VX9e-DK
VX9e Deluxe Kit QUICKSTART GUIDE
SPECIFICATIONS
Screen Size : Diagonal 8.9" TFT - LCD
Resolution : 1024 x 600
LCD Brightness : 180cd/m
Contrast Ratio : 300:1
Viewing angles : 45°/45°(R/L) 15°/35°(U/L)
Operating Volts : DC 12-20V
Power Consumption : 8.5 Watt max.
Operating Temp. : 0 to +50°C
Dimension : 9.125” x 7.0” x 1.625”
Weight : 1.6 lbs
SUPPORT RESOLUTION - HDMI, HD-SDI, Component, Composite (Not all modes supported on all inputs)
480/59.94i
480/59.94p
576/50i
576/50p
720/23.98p
720/24p
720/25p
720/30p
720/50p
720/59.94p
720/60p
1080/23.98psf
1080/24psf
1080/23.98p
1080/24p
1080/25p
1080/29.97p
1080/30p
1080/50i
1080/50p
1080/59.94i
1080/59.94p
1080/60i
1080/60p
CONFIGURATION OF SETTING MENUS
Contrast 0-60
Brightness 0-60
Tint 0-60
Chroma 0-60
Sharpness 0-60
Color Temp. User 1-5
5600K
6500K
9300K
OSD Language English
OSD Duration 5-60 second Chinese
Fuction 1 Window 1 French
Window 2 Spanish
HV Delay
Blue Gun
Pixel
Fuction 2 Window 1
Window 2
HV Delay
Blue Gun
Pixel
System Reset
This function recalls user dened values for
the Red, Green and Blue settings .The user
setting will remain in memory indenitely and
can be erased by using the reset option in the
main menu.
This function turns off the red and green
channels of the display or set the display into
monochrome mode and is used to calibrate
the display when using SMPTE or ARIB color
bar patterns. The blue only setting will allow
the user to adjust the hue and saturation of
the display and the monochrome may be
used to set the brightness and contrast.
This function displays the blanking portion of
the incoming signal.
The LCD panel in this display has a native
display of 1024 x 600 pixels. A signal of any
other resolution is scaled to t this native
resolution. There may be time when it is
desired to view the incoming signal without
scaling. Enabling Pixel to Pixel mode turns off
the scaling and displays a 1024x600 pixel
window of the original image. Each pixel of
the panel displays one pixel of the original
image. The user may use the arrow buttons
(buttons 5-8) on the monitor face to move the
window left, right, up and down to see the
desired portion of the image.
This function displays a side by side compari-
son of the incoming video signal. Pushing the
F1/2 button one time will enter the mode.
Each time the F1/2 button is pushed it will
freeze the current frame on the right hand
side of the display while the left continues to
display the live signal. Pressing the exit
button will exit the window mode. Use
Window 1 for 16:9 signals and Window 2 for
4:3 signals.