Ikan D24 User manual

1
Contents
Safety Instructions........................................................................2
Front..............................................................................................3
Rear...............................................................................................4
MENU Description........................................................................5
COLOR...........................................................................................
FUNCTION....................................................................................8
DISPLAY......................................................................................10
DISPLAY FUCTION.....................................................................11
AUDIO.........................................................................................13
MARKER......................................................................................14
ANALOG......................................................................................15
SETTING.....................................................................................1
List of Compatible Video Formats...............................................17
Specifications..............................................................................18
Dimension....................................................................................19
CONDITIONS OF WARRANTY SERVICE....................................20

2
Safety Instructions
• To help avoid damaging your monitor, connect only one power (DC
or battery) in operation.
• Rough handling of product may cause physical damage or
malfunction.
• Never insert anything metallic into the monitor openings. Doing so
may create the danger of electric shock.
• To avoid electric shock, never touch the inside of the monitor. Only
a Qualified should open the monitor’s case.
• Openings in the monitor cabinet are provided for ventilation. To
prevent overheating, these openings should not be blocked or
covered.
• Put your monitor in a location with low humidity and a minimum of
dust. Avoid places like damp basement or dusty hallways.
• Place the monitor on a solid surface and treat it carefully. The
screen is made of glass and can be damaged if dropped or sharply
hit.
• Do not attempt to remove the back cover, as you will be exposed to
a shock hazard. The back cover should only be removed by
qualified service personnel.
• Unplug the monitor power before you connect external devices to
the monitor.
• If your monitor does not operate normally, or if there are any
unusual sounds or smells coning from it, unplug it immediately and
contact us.
• Please do not disassemble the monitor. No service will be provided
in that case.
• Displaying fixed picture for a long time may cause an afterimage or
dead Spots. To recover LCD pixels, display whole white picture on
screen for an hour or two and pixels will be recovered.
• No service will be provided for user’s own color calibration.

3
Front
Input Switcher(VGA, DVI, HDMI-1(HDMI 2 0), HDMI-2, HDMI-3,
HDMI-4, SDI)
MENU
Enter into menu and choose.
Buttons for Adjustment or Choose
Buttons used to adjust Volume/ Brightness/ Contrast/ Hue/
Saturation/ Sharpness/ Backlight.
EXIT
Exit the menu/ choose the input signal.
Function Keys
Short press these buttons for functions operation, and long press
these buttons for function key setting(Check Field, Freeze, Mute,
Temperature, Over Scan, Display Mode, Zoom, Aspect Ratio, Safety
Area, Center Marker, Display Rotate).
Indicator
Headphone Jack
Power

4
Rear
TALLY Indicator Signal Input
VGA Input
HDMI 1(2 0) Input
HDMI 2 Input
HDMI 3 Input
HDMI 4 Input
DVI Input
Audio L/ R Stereo Input
SDI Input
DC Input
For DC power supply. Check the DC Input voltage. In case of using the
Battery power, DC 11 ~ 27V is usable.

5
MENU Description
General Cautions for OSD Menu or Display
The menu may not be displayed even when user pressed Menu button
if there's No Signal, or in unclear signal status.
The menu selection may be saved for each input signal mode, so
sometimes user should do menu selection again.

6
COLOR
Backlight
Adjust the Backlight from 0 to 100.
Brightness
Adjust the Brightness from 0 to 100.
Contrast
Adjust the Brightness from 0 to 100.
Color Adjust
Enter to adjust the Hue and Saturation of three primary colors(Red,
Green, Blue) and three auxiliary colors(Cyan, Yellow, Magenta).
Hue
Adjust the Hue from 0 to 100.
Saturation
Adjust the Saturation from 0 to 100.
Gamma
Adjust the Gamma Off, 1.8, 2.0, 2.2, 2.4.

7
Color Temp
Select color temperature among User, 9300K, 7500K, 500K, 5800K
or sRGB.(Gain Menu are displayed on USER temperature only).

8
FUNCTION
Aspect Ratio
Set the Aspect Ratio of the screen to be Full, 1 :9, 4:3, 1:1, 2.39:1,
2.35:1, 1.89 :1, 1.85:1.
Over Scan
Set the Over Scan to be on/ off. When turn on this mode, the image
displays 90% of the original signal.
Peaking
Turns on Peaking mode.
Freeze
Turns on Freeze mode.
Zoom
Turns on Zoom mode, to zoom Z1(the upper left part)/ Z2(upper right
part)/ Z3(down left part)/ Z4(down right par)/ Z5(upper half part)/
Z (down half part) of the image.

9
Check Field
Turns on Check Field mode. The mode can be set Red, Green, Blue or
Mono.

10
DISPLAY
Display Mode
Set the Display Mode of the screen to be 1P(1 picture), 2P-LR(2
pictures on the left and the right separately), 2P-TB(2 pictures on the
top and the bottom separately), PIP(picture in picture), 4P(4 pictures).
Display Function
Enter to set the Rotate, Ratio, Position, Transparency, Size and Input
Swap of the image.
Select Region
Choose the Select Region in different Display Mode. To adjust the
Brightness, Contrast, Hue, Saturation, Sharpness and Backlight of the
images separately or simultaneously.
Input Source
Enter to choose the Input Source(Auto, VGA, SDI, HDMI1, HDMI2,
HDMI3, HDMI4 or DVI) for each image.
Information
Enter to check the information of each image.

11
DISPLAY FUNCTION
Display Function Setting in Different Display Mode

12
Display Mode Display Function Select Region Input Source
1P 1P Rotate
(0°, 90°, 180°, 270°)
1P SDI, HDMI1 ，
HDMI2,
HDMI3,
HDMI4, DVI,
Auto, VGA
2P-LR LR Ratio(0~4); Input Swap 2P-L,2P-R,Full 1P, 2P
2P-TB Input Swap 2P-T,2P-B,Full 1P, 2P
PIP PIP Position
(LT, RT, LB ，RB ，Mid, User);
PIP Transparency(0~10);
PIP Size(0~10);
Input Swap
Main, Sub, Full 1P, 2P
4P / Full,
1P-in, 1P-Out,
2P-in, 2P-Out,
3P-in, 3P-Out,
4P-in, 4P-Out,
1P, 2P, 3P, 4P

13
AUDIO
Volume
Set Volume of speaker between 0 to 100.
Mute
Turn on/ off the Mute mode.
Audio Source
Select the speaker output between the analog signal(A0) and the
digital signal(D1). For VGA/ DVI, use the analog signal(A0). For
HDMI/ SDI, use the digital signal(D1).

14
MARKER
Safety Area
Turn on the Safety Area mode, to adjust size of the Safety Area to be
80%, 85%, 90%, 93% or 9 %.
Center Marker
Set Preference to display center marker or not.
Line Width
Set the Line Width of the Safety Area and the Center Marker between
0 to 10.
Line Color
Set the Line Color of the Safety Area and the Center Marker to be Red,
Green, Blue or White.

15
ANALOG
Auto Adjust
When with VGA input, enter the Auto Adjust to set H/ V Positions and
Phase auto.
H Position
Adjust the image position on the left/ right of the screen.
V Position
Adjust the image position on the top/ bottom of the screen.
Clock
Adjust the screen linear displayed on the screen.
Phase
Adjust the timing interference of the monitor, generally do not use it.

16
SETTING
Reset
Reset all the parameters of the monitor to factory setting.
Time
Set the menu display time between 1 to 0s.
H Position
Adjust the menu H Position displayed on the screen.
V Position
Adjust the menu V Position displayed on the screen.
Language
Set the menu display language between English and Chinese.
Transparency
Adjust the transparency of the menu display between 0 to 255.
Rotate
Adjust the Rotate of the menu display between 0°, 90°, 270° .

17
List of Compatible Video Formats
Signals Input Signal Formats
HDMI
4K
480i/57 i/480p/57 p
720p ( 0/59.94/50/30/29/25/24/23.98)
1080i ( 0/59.94/50 ）
1080p ( 0/59.94/50/30/29.97/25/24/24sF/23.98/23.98sF)
SDI
480i/57 i
720p ( 0/59.94/50/30/29/25/24/23.98)
1080i （0/59.94/50 ）
1080p ( 0/59.94/50/30/29.97/25/24/24sF/23.98/23.98sF)

18
Specifications
Panel Size 23.8″ IPS LCD
Resolution 3840 (H)×21 0(V) pixels
Dot Pitch (mm) 0.13725(H)×0.13725(V)
Brightness 310 cd/m²
Contrast 1000:1
Viewing Angle 178°(L/R) /178°(U/D)°
Backlight LED
Input Voltage DC 13 ～18V
Input Signal
HDMIx4(HDMI2.0 x 1; HDMI1.4 x 3)
SDI, DVI, VGA, Audio(L/R), Tally, USB Upgrade
Output Signal SDI
Audio Output Headphone Jack, Speaker
Power Consumption ≤ 42W
Special Function TALLY indicator
Working Temperature - 10 ～50℃
Storage Temperature - 20 ～0℃
Unit Size
(mm)
5 5W×372H×78D
(without U stand)
01.0W×420.7H×124.1D
(with U stand)
Unit Weight 7.2 kg (with U stand)

19
Dimension
D24 (W X H X D)
01.0×420.7×124.1mm
(23.7 x 1 . x 4.9 inches)