Ikan PT4000 User manual

Features you need, Prices you want.
PT4000 20” Teleprompter
User Guide
3903 Stoney Brook Dr. Houston TX 77063
Tel: 1.713.272.8822
Fax: 1.713.995.4994
www.ikancorp.com
© 2009 ikan Corporation. All right reserved.

3903 Stoney Brook Dr. Houston TX 77063 | +1.713.272.8822 | www.ikancorp.com | [email protected] | © 2009 ikan Corporation. All right reserved.
PT4000 20” TELEPROMPTER
15” T-Slot
8” T-Slot
20” T-Slot with Metal Bracket
8” T-Slot with Metal Bracket
(Optional Tripod Mount)
Prompter Glass Frame
Additional Tool Needed:
** Not all parts needed for this teleprompter assembly,
depends on your camera and tripod.
2 x L-Bracket
8 x T-Slot Nut
2 x 3/8-16 Receiving Nut 2 x 1/4-20 Receiving Nut
2 x 3/8-16 Screw 2 x 1/4-20 Screw 8 x Phillips Head Screw(S)
AB C D
M
P
NO
IJKL
EF G H
32 x Phillips Head Screw(L)
12 x T-Plate
2 x Mounting Bracket 100mm Mounting Bracket
(for Optional Battery Mount)
INTRODUCTION
Thank you for purchasing the ikan PT4000 20” Teleprompter. The PT4000 is easy to use and will quickly become an integral part
of your studio. For more information on this and many other innovative ikan products, please visit our website:
www.ikancorp.com.
PACKAGE INCLUDES
20” LCD Monitor Kit (includes AC Adapter and Power Cord)
Prompter Hood Kit (includes 2 piece hood and 3 velcro strips)
PrompterPro Software
User Guide
Teleprompter Parts:
Checked by
CONDITIONS OF WARRANTY SERVICE
• Free service for one year from the day of purchase if the problem is caused by manufacturing errors.
• The components and maintenance service fee will be charged if the warranty period has expired.
Free Service will not be Provided in the Following Situations: (* Even if the product is still within the warranty period.)
• Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.
• Damage caused by natural disaster, abnormal voltage, and environmental factors etc.
1 of 10

3903 Stoney Brook Dr. Houston TX 77063 | +1.713.272.8822 | www.ikancorp.com | [email protected] | © 2009 ikan Corporation. All right reserved.
ASSEMBLY INSTRUCTION
1
34
2
Attach the Mounting Bracket (Part J) to the back of the 20”
monitor using 4 x Short Phillip’s head screws (Part H).
The two flaps of Part Js should be perpendicular to the
monitor control buttons.
Attach the 20” T-slot with Metal Bracket (Part P) to the
assembled parts. You will use 2 x T-plates (Part C) and
4 x Long Phillips Head screws (Part G) to do so. Make
sure to evenly tighten all screws in this assembly.
Attach 4 x T-slot Nuts (Part D) and 4 x Long Phillips Head
Screws (Part G) as shown on the diagram.
PT4000 20” TELEPROMPTER
Part-I
Part-M
Part P
Attach L-Bracket (Part I) to 8” T-slot (Part M) using 2 x
T-plates (Part C) and 4 x Long Phillips head screws (Part
G). Refer to illustration below for configuration. The
L-Bracket’s (Part I) top half should be flush with the
edge of the 8” T-slot (Part M). Arrange the long section
of Part I attached to Part M.
Part-G
Part-G
Part-C
Part-C
PT4000
Rear view of 20” monitor
PT4000
Rear view of 20” monitor
Part-D
Part-G Part-G
Part-H Part-H
Part-J
+
+
+
+
Note: Do not completely tighten any screws until you have positioned
the monitor on the T-Slot.
Note: Make sure to tighten the
Long Phillips head screws down
as tight as possible. This will
support the weight of the monitor.
2 of 10

3903 Stoney Brook Dr. Houston TX 77063 | +1.713.272.8822 | www.ikancorp.com | [email protected] | © 2009 ikan Corporation. All right reserved.
ASSEMBLY INSTRUCTION
5
6
Attach another L-Bracket (Part-J) to the assembled parts. Make sure to arrange the long section of Part J as shown in the
illustration, otherwise there will not be adequate room to place the monitor. You will use 4 x Long Phillips head screws
(Part-G) and 2 x T-plates (Part-C) to attach it. Then, you will use 4 x Long Phillips head screws (Part-G) and 2 x T-plates
(Part-C) to attach the 15” T-slot (Part-O). Make sure to evenly tighten all screws in the assembly.
PT4000 20” TELEPROMPTER
Part-O
Part-G
Part-G
Part-C
Part-J
ikancorp.com
Attach your tripod skid plate to Part-N.
For those who use a tripod that is rear loading (ie: your tripod skid plate slides into the tripod head from the rear), we have provided an
optional piece , Part-N, will allow for more convenient attaching and detaching of the PT4000 Teleprompter on your tripod.
> Loosen the screws and slide out the Metal Bracket
through the channels
> Install 2 x Part-A & Part-E or 2 x Part-B & Part-F
> Slide in the Metal Bracket through the single channel
of the bottom of the Part-P
> Attach your tripod skid plate to the remaining Part-N (8” T-Slot)
and secure them on your tripod head
> Attach the assembled teleprompter to your tripod
your
tripod
Part-N (Metal Bracket)
Part-N (8” T-Slot)
ikancorp.com
Important Note: Your tripod or pedestal should be a heavy-duty
grade. The PT4000 is a heavy studio teleprompter and many
tripods may not be able to hold the weight of it. Be sure that your
tripod and head can handle it.
3 of 10

Install 4 x T-plates (Part C) and 8 x Long Phillips Head screws (Part G) onto the Metal frame with Prompter Glass (Part L).
Then, slide the Prompter Glass assembly onto the completed Teleprompter frame. Refer to the diagram below.
3903 Stoney Brook Dr. Houston TX 77063 | +1.713.272.8822 | www.ikancorp.com | [email protected] | © 2009 ikan Corporation. All right reserved.
ASSEMBLY INSTRUCTION
7
8
PT4000 20” TELEPROMPTER
your
tripod
> Install 4 x Part-C on Part-L and
secure with 8 x Part-G (Place the
Part-C on the inner sides)
Part-Q
Part-C
Part-G
Part-L
ikancorp.com
Slide the Monitor with mounting bracket onto the 15” T-slot (Part O), aligning the T-slot Nuts with the T-slots of Part O.
Refer to the diagram below.
ikancorp.com
Side View
Part-O
Part-M
Part-P
4 of 10

3903 Stoney Brook Dr. Houston TX 77063 | +1.713.272.8822 | www.ikancorp.com | [email protected] | © 2009 ikan Corporation. All right reserved.
10
9
PT4000 20” TELEPROMPTER
Attach your camera to the Metal Bracket on the 20” T-slot. To do so, first loosen each screw on the metal bracket and slide
it off the T-slot. Then, use either the ¼-20 or the 3/8 screw to attach your camera to the metal bracket (Some cameras may
require a washer or other spacer in order to fit snugly).
your
tripod
ikancorp.com
Washer (Not included)
** Some cameras may require
an extra spacer, such as a
washer, in order to fit snugly.
Part-E or Part-F
(depends on your camera)
ikancorp.com
> Loosen the screws and slide out the Metal Bracket
through the channels
> After attaching your camera, slide back the Metal Bracket
through the channels and tighten all screws.
camera
lens
metal frame
monitor
Use the Velcro strips to fit for three outer sides of the Prompter Glass Frame. Peel back the covering strips to expose the
adhesive and then stick the Velcro to the sides of the frame. This will allow the Hood to connect when you place it on the
assembled Teleprompter.
velcro
velcro
velcro
5 of 10

3903 Stoney Brook Dr. Houston TX 77063 | +1.713.272.8822 | www.ikancorp.com | [email protected] | © 2009 ikan Corporation. All right reserved.
11
PT4000 20” TELEPROMPTER
ASSEMBLY INSTRUCTION
your
tripod
ikancorp.com
Step A
Step B
www.ikancorp.com
A. Fasten the hood front to the edges of
the glass frame, using the velcro you
placed on in Step 10. Make sure it
is securely fastened.
B. Fasten hood back to the hood front.
Make sure to drape curtain correctly
around the bottom frame.
C. Tighten drawstring around lens or
lens hood to prevent light leaks.
velcro
hood front
hood back
6 of 10

3903 Stoney Brook Dr. Houston TX 77063 | +1.713.272.8822 | www.ikancorp.com | [email protected] | © 2009 ikan Corporation. All right reserved.
1
2
3
4
5
Powering The Monitor. To do this, you have two options.
a) You can plug the AC power adapter into the power input jack. See Figure 2.
b) You can connect a pro battery using the optional accessories, PBK17-S or PBK17-A (Pro Battery Kit)
and then plugging that plate into the DC-In connector.
You can connect PT4000 to your computer with VGA cable (not included in the PT4000 package).
Connect with DVI: You can also use a DVI signal from your source with this input.
Connec with A/V for PiP: You can connect a BNC cable to your PT4000 to receive a composite signal, in order to use
Picture-in-Picture.
3ft minimum for best viewing distance.
Figure 2 - Rear view
Figure 1 - Front view
PT4000 20” Monitor
Quick Start Guide
FLIP MENU PiP INPUT ON/OFF
ABCDEF
VGADVI VIDEO 12V 4A USB
12V-24V
DC IN
20” Monitor
1. POWER Power switch (I = On, O = Off)
2. INPUT Video input: DVI, VGA, BNC
3. PiP Picture in Picture
4. MENU Access to all monitor settings: Brightness, Contrast, etc
5. While in MENU mode, toggle adjust setting down
6. While in MENU mode, toggle adjust setting up
7. While in MENU mode, toggle adjust setting right
8. While in MENU mode, toggle adjust setting left
9. FLIP Flip image horizontally
123456789
A. DC 12V-24V Power Connection
B. USB - Firmware Update used only
C. AC 110V-220V Power Connection
D. A/V - Input for standard definition composite signal
E. VGA - Connection for PC
F. DVI - Connection for Mac
7 of 10

Quick Start Guide / PT4000 (How to set-up your computer for the PT4000)
IntroductIon
When using the PT4000 you should set up you computer to be in “Clone Mode” or
“Mirror Mode”. We do this so the talent can see the exact same thing the teleprompter
operator is viewing. In this guide we will go over some of the most common ways of
achieving this. Before you start you should make sure you have the last drivers for your
video card. You should visit the manufactures website the get these. We will go over the
Nvidia , ATI, and Intel way of achieving this as they are what most computers are
equipped with.
1)Fist thing to do is make sure that the monitor of the PT4000 is plugged in powered on and
connected to the VGA port of you computer. (It’s the blue 15 pin connector on the back of
your computer)
2)The easiest way to set up your computer if you are using a laptop is to use the hot keys.
Most laptops have a set of keys you press at the same time to toggle between display
modes. In this particular case the key combination is FN and the F4 key. (see illustation)
You will press these keys until you get the same exact image on the PT4000 that you have
on your laptop. The mode we are looking for is “Clone Mode”. Every laptop manufacturer
seems to have a different key combination so you should check your user’s manual.
nvIdIa (see gure 1)
3)If the above step did not work or you are using a desktop computer then we can do it the
longer method. (Nvidia)
a. Right-Click on your desktop
b. Choose properties
c. Click on the Settings tab
d. Change the resolution of your monitor to 800x600 or 1024x768 and press the
apply button.
e. Now press the advanced button
f. Click on the tab labeled with the word GeForce or the Nvidia logo. (this may look
different depending on your graphics card model.)
g. Click on “Nview Display Settings” on the left side.
h. On the right side choose Clone from the Nview Display Mode drop down box.
i. Click on the apply button.
j. You should be in clone mode now. Close all open windows.
k. You are now ready to start Prompter Pro V2.
atI (see gure 2)
4)If step number 2 did not work or you are using a desktop computer then we can do it the
longer method. (ATI)
a. Right-Click on your desktop
b. Choose properties
c. Click on the Settings tab
d. Change the resolution of your monitor to 800x600 or 1024x768 and press the
apply button.
e. Now press the advanced button
f. Click on the Tab labeled with an ATI logo and the word “Displays”
g. Press the red button to the left of the word monitor. This will “turn on” your second
ary monitor (which is the PT4000)
h. Press the small blue button with two squares overlapping each other. This is the
“Clone Mode” button.
i. Now Press the apply button.
j. Your are now ready to start Prompter Pro V.2
nvIdIa
(gure 1)
atI
(gure 2)
b.
d.
h.
d.
h.
+
b.
8 of 10

atI (see gure 3)
5)If step number 2 did not work and you do not recognize the steps in step 4 but still have an
ATI card and are using a desktop computer then follow these steps:
a. Right-Click on the desktop
b. Click on the “ATI CATALYST Control Center”
c. Click on the Displays Manager option on the left
d. Right-Click on the small grey picture of a monitor under the “Attached displays
currently disabled” section
e. Choose Clone Main with monitor
f. Now click apply
IntEL (see gure 4)
6)If step number 2 did not work or you are using a desktop computer then we can do it the
longer method. (Intel)
a. Make sure you are running at 1024x768 resolution
b. Right-Click on the desktop
c. Roll your mouse over Graphics Options
d. Roll your mouse over Output To
e. Roll your mouse over Intel Dual Display Clone
f. Click on Monitor + Notebook
g. You are now ready to start Prompter Pro V.2
7)There is another way to do it on the Intel graphics card:
a. Right-Click on your desktop
b. Choose properties
c. Click on the Settings tab
d. Change the resolution of your monitor to 800x600 or 1024x768 and press the
apply button.
e. Now press the advanced button
f. Click on the “Intel Graphics Media Accelerator Driver” button
g. Click on the Intel Dual Display Clone button on the left.
h. Click on apply.
i. You are now ready to start Prompter Pro V.2
Quick Start Guide / PT4000 (How to set-up your computer for the PT4000)
atI
(gure 3)
d.
b.
IntEL
(gure 4)
c.
d.
e. f.
d. f.
g.
(For Step 7)
For additional help please call the ikan support team at
713-272-8822 or email us at support@ikancorp.com
Office Hours: 9am - 6pm Central Time
9 of 10

3903 Stoney Brook Dr. Houston TX 77063 | +1.713.272.8822 | www.ikancorp.com | [email protected] | © 2009 ikan Corporation. All right reserved.
F.A.Q.
ikan PT4000 TELEPROM P T E R
Q: Can the PT4000 monitor be powered by 14.4V power sources (such as a Gold Mount or V-Mount
battery pack)?
A: The PT4000 can be powered by any power source, ranging from 12 volts to 24 volts. This includes
standard Gold Mount or V-Mount battery packs, when attached using the optional PBK2100 line of
battery plate kits.
________________________________________________________________________
Q: What tripod is recommended to support the PT4000?
A: Ikan does not recommend any certain tripod for usage with the PT4000, however we do suggest certain
criteria for choosing your tripod to be used with the PT4000. The tripod should have a high weight
capacity. The weight of the assembled PT4000 is 34.7 lbs and this should be factored in with the weight
of the camera, lens and any additional accessories when determining the tripod necessary. Be aware that
you should leave room for growth between the maximum load capacity of the tripod and the full weight
of your camera and tripod rig. Additionally, for heavy studio usage, you might consider a full pedestal
unit rather than a tripod.
________________________________________________________________________
Q: Can I use my PT4000 for field production applications?
A: Ikan does not recommend disassembling and moving the PT4000 for location shooting. We recommend
a separate, smaller field teleprompter, such as the PT1000 or PT2100 for usage on-location and in the
field.
10 of 10
Table of contents
Other Ikan Professional Video Accessories manuals

Ikan
Ikan PT4500W-TRIPOD-TK User manual

Ikan
Ikan PT4100 User manual

Ikan
Ikan PT-ELITE-LS-RC User manual

Ikan
Ikan PT3100 User manual

Ikan
Ikan PT-ELITE-U-RC User manual

Ikan
Ikan PT3500-HB User manual

Ikan
Ikan PT3500 User manual

Ikan
Ikan PT2500 User manual

Ikan
Ikan PT4200-P2P User manual

Ikan
Ikan PT3500-P2P User manual

Ikan
Ikan PT4700S-PEDESTAL User manual

Ikan
Ikan PT4900-SDI-P2P User manual

Ikan
Ikan PT1200-LS User manual

Ikan
Ikan PT4700S-TMW-PEDESTAL User manual

Ikan
Ikan HomeStream HS-VCD-PRO User manual

Ikan
Ikan PT4900-P2P User manual

Ikan
Ikan PT4500-TM-TRIPOD User manual

Ikan
Ikan PT4900-SDI-TK User manual

Ikan
Ikan PT4900-PTZ-TM-OTTICA User manual

Ikan
Ikan PT3500-TK User manual