PROAIM CINEMA P-2BPM-01 User manual

1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Heavy-Duty Telescopic Mast w 5/8" Baby Pin (P-2BPM-01)
Assembly Manual
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Proaim Heavy-Duty Telescopic Mast w 5/8" Baby Pin

2
Baby Pin Setup
 Loosen & remove the bolt of a top handle of a
Soundchief cart (Not Included) using a
(spanner-12) or (4mm) Allen key.
 Follow the same process to remove all the
bolts of the top handle.
 Loosen the knob of the center mast bracket
of the Soundchief cart (Not Included), and
then align and insert a baby pin into the
center mast bracket.
 After inserting the baby pin, tighten and
secure the knob of the centre mast bracket.
 Adjust the telescopic height of the baby pin
accordingly by loosening the quick locking
knob of a baby pin, as shown in the image.
NOTE: The riser has a 5/8" baby pin on the top
and extends from 28 to 50". It has 2 secons
boom one has a diameter of 25mm, and the
upper one has a 19mm diameter.
28 to 50”
extends height

3
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
 Attach the VESA Monitor Mount
(Not Included) to the LCD Monitor
(Not Included). Then, Mount the VESA mount
on the baby pin (5/8”) matching the main
hole, and secure the assembly by tightening
the knob.
NOTE: It is used to mount a light, monitor, or
another accessory to Sound chief cart.
YOUR PROAIM HEAVY-DUTY TELESCOPIC MAST W 5/8" BABY PIN
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)