PROAIM SL-SKTE-0277 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Skate Adjustable Length Slider (SL-SKTE-0277)
A s s e m b l y M a n u a l
Bag Packing
Carriage Lock
Camera Mounng Screws:
1/4”-20 & 3/8”-16 Tripod Mounng Threads 1/4”-20 & 3/8”-16

2
 If you need to secure the camera plate at a
stac posion, then ghten the provided
knob.
Skate Adjustable Length Slider Setup
 Similarly loosen the knob to insert the wheels
and ghten at desire posion.
Begin by taking out the mainframe from the
case/Bag.
 You can adjust the height of feet or remove
the feet by loosen the provided knob
according to your requirement.
Height Adjustable
 When, the feet direcon is on upper side or
its removed from the slider, the axles wheels
free for the 360° rotaon.
 Loosen the knob, remove the Axles wheels as
shown in the images.

3
YOUR PROAIM SKATE ADJUSTABLE LENGTH SLIDER
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
 Camera plate is equipped with numerous
1/4”-20, 3/8”-16 threads that allows you
to mount the camera directly.