IKEA SYMFONISK User manual

SYMFONISK

2
10071829
10071830
1x
1x
1x

3
SYMFONISKTRÅDFRISYMFONISK
+ +

4
1

5
> 10 s
max 5 cm
(max 2")
AAA
AAA
2

6
3

7
8
9

8
11
4
5
6

9
4
5

10
6
7
8 9

11

12

14
Volume down
Volume up
Play/Pause
Skip to next track
Repeat last
played track
LED indicator
Shortcut button 1
Shortcut button 2
2 x HR03 AAA
Pairing button
Open Locked
Battery lid locking
SYMFONISK sound remote overview
AAA
AAA

English 16
Français 23
Español 29

16
English
IMPORTANT
SYMFONISK sound remote is made to work together
with IKEA gateway or hub and control your SYMFONISK
speakers.
Use the IKEA Home smart app to add more functions to
your sound remote.
You cannot add "Works with IKEA Home smart" marked
products directly to your sound remote.
If you have an Apple device
Go to the App Store and download the IKEA Home smart
app. The app will take you through the process of installing
your SYMFONISK sound remote and other "Works with IKEA
Home smart" devices.
If you have an Android device
Go to the Google Play store and download the IKEA Home
smart app. The app will take you through the process of
installing your SYMFONISK sound remote and other "Works
with IKEA Home smart" devices.
Getting started
Insert 2 HR03 AAA 1.2V batteries with correct polarity. Start
the IKEA Home smart app and follow the instructions in the
app on how to set up your device and add scenes to the
shortcut buttons.
Close the battery lid and your sound remote is now ready
for use.

17
Sound remote functions
Play/pause
Press once to start or stop the music.
Repeat
Press once to repeat the most recently played music.
Skip
Press once to skip to the next track.
Raise and lower volume
Press and hold to change the volume rapidly.
Shortcut buttons
Activates the scene you link to this button via the IKEA
Home smart app. Scenes are set up in the IKEA Home
smart app on your smart device.
Care instructions
To clean the sound remote, wipe with a soft moistened
cloth, Use another soft, dry cloth to wipe dry.
Changing the batteries
When SYMFONISK sound remote is used regularly and as
intended, the batteries will last for approximately 2 years.
When it’s time to replace the batteries, the red LED
indicator on the back of the sound remote will ash when
you use it.
Open the battery lid and replace the batteries with 2 new
HR03 AAA 1.2V batteries.

18
WARNING!
Risk of explosion if either battery is replaced by an
incorrect type. Dispose of used batteries according to the
instructions.
IMPORTANT!
• SYMFONISK sound remote is for indoor use only and can
be used in temperatures ranging from 0 °C to
40 °C (32ºF to 104ºF).
• Do not leave SYMFONISK sound remote in direct sunlight
or near any heat source, as it may overheat.
• The range between SYMFONISK sound remote and the
receiver is measured in open air.
• Dierent building materials and placement of the units
can aect the wireless connectivity range.
Recommended batteries:
Batteries are sold separately. We recommend 2 x LADDA
rechargeable batteries HR03 AAA 1.2V
Do not mix batteries of dierent capacities, types or date
stamps.
Save these instructions for future use.

19
Technical data
Model: SYMFONISK sound remote gen 2
Type: E2123
Input: 2.4V, 2 x LADDA batteries HR03 AAA 1.2V
Range: 10 m unobstructed
For indoor use only
Operating frequency: 2400-2483.5 Mhz
Output power: 3 dBm (EIRP)
Manufacturer: IKEA of Sweden AB
Address: Box 702, SE-343 81 Älmhult, SWEDEN
This device complies with Part 15 of the FCC Rules.
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation Science and
Economic Development Canada's licence-exempt RSS
standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation of the device.
WARNING:
Any changes or modications to this unit not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.

20
NOTE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the quipment o and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.