Ikegami HDK-55 User manual

HDK-55
16-bit Full Digital HDTV
Portable Camera System

Normal Image(Correction OFF)
Correction
OFF
Correction
ON
Normal VF image
FOCUS ASSIST ON Sample A FOCUS ASSIST ON
Sample B
FA(Fiber Adaptor) or TA(Triax Adaptor)
HDK-55
The HDK-55 is a high performance full digital HDTV camera
with superb picture quality and system versality for
studio and field producon.
16-bit Full Digital HDTV Portable Camera System
There are two types of camera operator assist functions incorporated in the HDK-55
camera head. The viewfinder detail(VF DTL) function allows the camera operator to
increase the detail edges to the viewfinder video for easy-focusing.
In addition, the Quick EZ Focus (Focus Assist) function is newly incorporated useful
tool, providing very distinct enhancement to the viewfinder edge signal to enable the
camera operator to make critical focus adjustment.
Camera Operator Assist Funcons
The Lens Aberration Correction function is newly incorporated
for minimizing the blur and colored edges caused mainly by lens
chromatic aberration.
Lens Aberraon Correcon funcon
The HDK-55 incorporates a newly developed FPGA together with advanced
full digital process ASIC to achieve outstanding picture performance.
Newly developed FPGA with advanced
full digital process ASIC
This camera is designed from
the start based on 16-bit A/D
and matching 16-bit DSP to
maximize the benefits of high
bit quantization.
Especially for the dark areas of
the picture, the higher
gradation for gamma and
other circuits improves the
reproduction, providing for
more natural color in the
shadow areas of the picture.
Video processing technology to maximize
the benefit of 16-bits
16-bit Camera
12-bit Camera 12-bit Camera
16-bit Camera
16-bit Camera
12-bit Camera
After Gamma
100% 100%
One unit
One unit
HD-SDI(10bit)Signal Out
0% 0%
A/D Convert
2/3-inch 2.3 Mega pixel AIT CCDs are employed to achieve 1000 TVL
horizontal resolution with excellent signal to noise ratio of 60dB at F10
(1080/59.94i) or F11 (1080/50i) sensitivity.
2/3-inch 2.3 Mega pixel AIT CCDs
The Fine Detail (DTL) function makes the picture more realistic by
compressing the detail edge component when shooting high contrast
scenes. Highlight DTL and several other DTL functions are also available.
Sophiscated features made possible with
digital technology
With a docking style camera
body, either an FA (Fiber
Adaptor) or TA (Triax
Adaptor) can be mounted
depending on the use.
Docking style camera body
2 Channels QTV
Two channels of QTV output (VBS)
are available for prompter and
external monitoring purposes.
The AUX OUT (VBS) connector can
be assigned to QTV-1, QTV-2, or
Main video by menu.
Note:BS/CCU should support 2 channels of QTV

The FA-55 Fiber Adapter and BSF-55 Base Station offer cost effective operation in 1080i formats, in combination with the HDK-55. The BSF-55 is designed in
the compact size of 1.5RU height with 19-inch rack mount width, transmitting uncompressed high quality pictures with use of SMPTE fiber cable between
camera and base station. Both HDTV and SDTV formats are supported simultaneously in both digital and analog form with a wide range of built-in interfaces.
The BSF-55 also features embedded audio in the SDI output signals.
FA-55/BSF-55 Fiber Extension System
The DTA-55 / BST-55 is a triax transmission system, using Ikegami's original super low latency digital transmission to minimize degradation and deliver the full
resolution and SNR of the camera head to the base station regardless of the triax cable distance. This new transmission system allows customers to transition
from SD to HD while still using their existing triax camera cable infrastructure, saving cost and continuing to use a rugged easy to repair cable/connector type.
DTA-55/BST-55 Digital Triax Extension System
The SE-H750 System Expander enables the use of the 9-inch
viewfinder and full studio lenses with the HDK-55, converting the
portable camera into a full facility studio camera. Installation of the
camera into the SE-H750 is very easy, and conversion back to
portable configuration is quick for maximum operating flexibility.
For the HDK-55, a 2-inch 16:9 high definition LCD color viewfinder for portable application
is available. In addition, a 7.4-inch OLED and a 9-inch LCD color studio viewfinders are
available as options.
Three different control architectures are supported by the new OCP-300 Operation Control Panel and BSH-300 Ethernet/ICCP command converter, each
with a wide range of camera control capability.The OCP-300 supports not only Ikegami's conventional one-by-one ICCP control and Arcnet based control
systems, but also an Ethernet based control system, allowing customers the flexibly to choose thecamera control system based on their needs. The
OCP-300 includes a touch screen LCD with rotary encoders,and SD Memory Card slot for full camera setup and filing capability. The depth-of-control
feature allows the OCP-300 control to be selected from basic to complete to fit the customer's operating discipline. The OCP-300 also supports PoE,
Powering over Ethernet, so separate power supplies are not necessary.The BSH-300 is used for converting command between Ethernet and ICCP,
allowing previous control panels such as the OCP-200 and MCP-200, to be integrated into the Ethernet network system.
* There are three types of BSH-300, Type-A, Type-B and Type-C, each with a different type and number of connectors.
Sophiscated Camera Control Panel System
SE-H750 System Expander
Variety of viewfinders
The VFE740HD is an OLED Color Viewfinder, employing a 7.4-inch QHD OLED panel, achievinghigh resolution,
high brightness, high contrast and wide viewing angle.Its true color reproduction and high quality gradation
provide optimum monitoringin the full range of uses. Especially its fast response achieves superb fast motion
images for shooting sports, etc.
VFE740HD 7.4-inch OLED Color Viewfinder
9-inch LCD2-inch LCD
Affordable Camera Systems
State-of Art System Accessories, Expanding HDTV

U228B143-ED
16-bit Full Digital HDTV Portable Camera System
HDK-55 BSF-55/BST-55
1080i (59.94Hz or 50Hz) Y,Pb,Pr 4:2:2 Interlaced
Image Sensors 2/3-inch 2.3 million pixel AIT CCD
2/3-inch RGB prism, f1.4
Lens Mount BTA- S1005B
Filter
(servo) ND 1234
100% 25% 6.2% 1.6%
Electronic Color ECC ABCD
3200K 4300K 6300K 8000K
Ambient Temperature
-20℃〜+45℃(-4°F 〜113°F)
30% 〜90% (Non-condensing)
DC +11 〜16V
Weight
Approx 4.5kg (9.92lbs) (Head + FA or TA, excluding VF)
Dimensions W138.5 x H270 x D337mm (Head + FA or TA, excluding VF)
(W5.5 x H10.62 x D13.25 inches)
F10 (1080/59.94i) / F11 (1080/50i) typical at 2000 lx
S/N 60dB typical (HDTV)
1000TV lines
45% or more
Variable Color Temperature 2,000K 〜20,000K variable
1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000
Horizontal
5 lines
Boost frequency: 13MHz 〜22MHz (HDTV)
Gamma OFF, 0.35, 0.4, 0.45
Gain -6, -3dB, 0dB, +3dB, +6dB, +9dB, +12, +18dB
Input Signals
External Sync Signal SYNC 0.6Vp-p ±6dB 75ohm 1ch
* DTA-55 does not have external sync signal input in
Audio Signal -60dB 〜+4dB (Variable) / -20dB (Fixed) 2ch (600
ohm Balanced)
Intercom Signal XLR Type or 110 Type CN 2ch
Output Signals
Analog Video Signal R, G, B D-Sub CN 1ch (for System Expander)
HD SDI Signal
with FA-55
with DTA-55
Serial Digital 75 ohm 1ch
Serial Digital 75 ohm 1ch
* The output signal should be fixed with main video
Q-TV Signal
with FA-55
with DTA-55
VBS signal 1ch
SD-SDI signal 1ch
AUX OUT Signal VBS signal 1ch
(QTV-1, QTV-2, or Main video selectable by menu)
* Available with FA-55 only.
* QTV-2 can not be selected if BS/CCU does not
support 2 channels of QTV.
MON Video Signal
ohm BNC 1ch
Intercom Signal 0 dBs 4ch (ENG/PROD/PGM1/PGM2) XLR Type or
110 Type CN
DC Output +12VDC 500mA (max), 4-pin type 1ch
Input Signals
External Sync Signal 1ch (HDTV/SDTV auto detect)
HDTV: PS 1Vp-p 75ohm bridged or Tri-sync signal
Return Video Signal HD/SD-SDI: 75ohm single end 2ch
(HD/SD SDI Selectable)
VBS: 75ohm single end 2ch
Q-TV Signal
BSF-55
BST-55
VBS 75ohm single end 1ch
SD-SDI 75ohm single end 1ch
Intercom(ENG/PROD) 4-wire or Clearcom or RTS
4-wire 0dBm 600 ohm 2ch
Clearcom -15dBs 200 ohm 2ch
RTS 0dBs 200 ohm 2ch
PGM(Program Sound) 0dBs 600 ohm/10k ohm switchable 2ch
Tally R/G 2ch
Output Signals
[Main Video Signal]
HD-SDI/SD-SDI Signal
VBS Signal
HD-SDI(SMPTE292M) /SD-SDI(SMPTE259M) 75ohm
2ch 4 outputs (HD-SDI/SD-SDI selectable)
1.0Vp-p 75ohm 1ch 2 outputs
[PM Signal]
HD-SDI/SD-SDI Signal
SDTV Analog Signal
Serial Digital 75 ohm BNC 1ch 1 output (MENU
SELECTION)
1.0Vp-p 75ohm BNC type 1ch 1 output
[WFM Signal]
HD-SDI/SD-SDI Signal
Phase Reference Signal
Serial Digital 75ohm 1ch (HD-SDI/SD-SDI selectable)
75 ohm single end Analog 1ch
HDTV: Tri-Sync(0.6Vp-p) / SDTV: HV(2Vp-p) (MENU
SELECTION)
Intercom
(ENG/PROD) 4-wire or Clearcom or RTS
4-wire 0dBm 600 ohm 2ch
Clearcom -15dBs 200 ohm 2ch
RTS 0dBs 200 ohm 2ch
MIC 0dBs/+4dBs 2 ch 2 outputs Low impedance (MENU
SELECTION)
Tally R/G 2ch, OPEN (OFF) / GND (ON) 50mA (max)
Data Trunk RS-422 1ch
* In case of the BST-55, the data trunk channel is
not supported as standard.
Dimensions W483 x H66.4 x D405 mm
(W19.00 x W2.63 x D16.00 inches) (excluding protrusions)
Weight
BSF-55
BST-55
Approx. 7kg (15.43 lbs)
Approx. 8kg (17.64 lbs)
Ambient Temperature 0℃〜+40℃(32°F 〜104°F)
30% 〜90% (Non-condensing)
AC100V to 120V / 200V to 240V ±10%
BSF-55
BST-55
Approx. 55VA (BS only)
Power for camera head: less than 180VA
Approx. 80VA (BS only)
Power for camera head: less than 180VA
Maximum Cable Distance
FA-55/BSF-55
DTA-55/BST-55
2000m with 9.2mmφFiber Cable
800m with Fujikura 8.8mmφTriax Cable
Rangs Rangs