Ikegami FE-B100A Manual

FE-C140SE / FE-B100A Fiber Extension System
The fiber extension system transmits HD-SDI, genlock, control, intercom, and microphone audio up to
500m (or up to 2Km with an additional separate power supply) on SMPTE hybrid fiber cable.
The OCP-200 / MCP-200 is a new Network based
control panel system offered as an alternate to the
traditional Ikegami style control panels. The Arc-
net system allows any OCP-200 to control any
camera with assignment set at the OCP itself.
System wiring is simplified with control of up to 96
cameras via a single coax cable between CCU
locations and video control locations. The OCP-200
and MCP-200 include touch screen LCDs. The
depth-of-control of the OCP-200 can be selected
from basic to complete to fit the customers'
operating discipline. Conventional one by one
camera control connection is also available.
Advanced Network Control System
Large Viewfinder support
Fiber System Diagram
For manned operation, a large studio viewfinder such as 5" B/W CRT
VF or 9" color LCD VF can be mounted on the FE-C140SE adapter.
Note:
*1: RS-422/RS-232C serial data interface is provided for Prompter or Pan/Tilt system.
*2: External +12VDC power must be provided at the camera side for extending cable length more than 500m.
*3: When SD-RET is selected, there is no RET-SDI output at CA side.
*4 : Due to transmission of one RET channel over the camera cable, RET-1/RET-2 is switched at CA.
Ikegami
OCP-200
MCP-200
BSH-200
Front
Rear
CPH-200
Front
Rear
Intercom System
Reference Sync
HD SDI
Digital Swer.
PM
SP
WFM
OCP Operation
Prompter
HEADSET
HEADSET
FE-C140SE
FE-B100A
TALLY BOX (op)
MIC (op)
VF (op)
SD RET
Source (SD:VBS)
HD RET
Source (HD:SDI)
Program Audio
Source
with TALLY SYSTEM
INTERCOMAUDIO OUT (ANALOG)
HD-SDI OUT-3
HD-SDI OUT-2
RET VIDEO OUT (SD-VBS)
RS422 or RS232C
HD-SDI
OUT-1
RS422 or
RS232C
Fiber Cable Max.500m
(w/ Separate Power Max 2,000m)*2
TALLY OUT
(EMBEDDED AUDIO DEMUX)
PGM IN (INTERCOM)
REF IN
SD RET-1.2 IN*4
SD RET-1.2 IN*4
*1
*3
*1
Remote Control
Remote Control
Panel
Prompter
ESC / CB
HD TRI SYNC or SD BBS
(ANALOG)
PM

FE-C140SE Camera Adapter Ratings&Performance
Transmission
Video Trunk signal
Transmission Distance
Input Signals
Output signals
Ambient Operating Temperature
Weight
Dimensions
HD-SDI SMPTE292M 1.485Gbps, 1 channel
HD-SDI SMPTE292M or NTSC VBS, 1 channel
500m or 2000m with an additional separate power supply
Audio signal :-60 / -40 / -20 / 0dBm, 600Ωbalanced, 2 channel
Intercom signal :-60dBm, 1 channel
Camera control :Ikegami COMMAND, 1 channel (PRC05-8pin M)
Serial Interface :RS-232C/RS-422 (D-SUB 25-pin F)
RET signal (SDI) :HD-SDI SMPTE292M, 1 channel (75ΩBNC)
RET signal (Analog) :HD-Y ch: PS 1.0Vp-p or NTSC VBS: VS 1.0p-p, 1 channel (75ΩBNC)
Phase reference :Tri-Sync 0.6Vp-p (BNC)
Audio PGM :0dBm, 600Ωbalanced, 1 channel (XLR-3pin M)
Camera control :Ikegami COMMAND, 1 channel (PRC05-8pin M)
Serial Interface :RS-232C/RS-422 (D-SUB 25-pin F)
-10℃~ +45℃(+14°F ~ +112°F) [Humidity 30% ~ 90%, non-condensing]
Approx. 4.5kg (9.9 lbs), excluding HDL-45, VF.
W148 x H198 x D280mm (W5.83 x H7.8 x D11.02 inches)
FE-B100A Base Station
Input Signals
Output Signals
Weight
Dimensions
RET signal (HD) :HD-SDI SMPTE292M (75ΩBNC)
RET signal (SD) :NTSC VBS (75ΩBNC)
Phase reference :Tri-Sync 0.6Vp-p or BBS 0.3Vp-p, 2-channel (75ΩBNC) (HD/SD auto detection)
Intercom signal :-60dBm, 1 channel
Audio PGM :0dBm, 600Ωbalanced, 1 channel (XLR-3pin M)
Intercom signal :+10dBu max.
Camera control :Ikegami COMMAND, 1 channel (PRC05-8pin M)
Serial Interface :RS-232C/RS-422 (D-SUB 25-pin F)
Main Video :HD-SDI SMPTE292M 1.485Gbps, 4 channel (75ΩBNC)
Audio signal :+4dBm, 600Ωbalanced, 2 channel
Intercom signal :+10dBu max.
Serial Interface :RS-232C/RS-422 (D-SUB 25-pin F)
Approx. 4.4kg (9.7 lbs)
W214.6 x H77.5 x D351.5mm (W8.85 x H3.05 x D13.84 inches)
Design and specifications are subject to change without notice.
H125B083-MK1.5 Printed in Japan
Certified
JQA-0773
ISO 9001
IKEGAMI ELECTRONICS (U.S.A.), INC.
HEADQUARTERS 37 BROOK AVENUE, MAYWOOD, NJ 07607
Phone:[phone] Fax:[phone]
WESTCOAST OFFICE 2631 MANHATTAN BEACH BLVD., REDONDO BEACH, CA 90278
Phone:[phone] Fax:[phone]
SOUTHWEST OFFICE 773 BEARDEN WAXAHACHIE,TX 75167 Phone:[phone] Fax:[phone]
MIDWEST OFFICE 747 CHURCH ROAD, UNIT C1, ELMHURST, IL 60126 Phone:[phone] Fax:[phone]
SOUTHEAST OFFICE 5200 N.W. 33RD AVENUE, SUITE 111 FORT LAUDERDALE, FL 33309 Phone:[phone] Fax: [phone]
Certified
JQA-EM3888
ISO 14001
URL http://www.ikegami.com
Ratings&Performance
Fiber Extension System
FE-C140SE/FE-B100A
F
E-100A with HDN-X1
0
F
E-100A with HDS-V1
0