
DC IN AUX IN
To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the
support section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes,
visite la sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur: www.iLiveElectronics.com
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com
Copyright © 2018 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their
respective owners. Specications are subject to change without notice.
International Support
Protect for Today
Sustain for Tomorrow
Made
Green
Bluetooth Wireless Audio
Pairing to a Device & Playing Audio
After initial pairing, the unit will stay paired unless unpaired manually by
the user or erased due to a reset of the device. If your device should become
unpaired or you nd it is unable to connect, repeat the steps listed here.
1. Power ON the unit and press the Pair button to begin pairing. The pairing
indicator will begin quickly ashing blue. When pairing, remain within 3 feet
of the unit.
2. Using the controls on your Bluetooth device, scan for and select ISBW348 in
your Bluetooth settings to pair. If your device requests a password, enter the
default password 0 0 0 0 . Refer to the user’s manual for your specic device
for instructions on pairing and connecting Bluetooth devices.
3. When successfully paired, the pairing indicator will turn solid blue and an
audible chime will sound from the speaker.
4. Use the controls on the connected device to select and begin playing audio.
Audio played through the connected Bluetooth device will now be heard
through the speaker. You can use the controls on the unit or the connected
device to play, pause, and adjust volume.
Previously Connected Devices
• The speaker can remember multiple Bluetooth devices and will always try to
re-connect to the last device used.
• To re-connect to a dierent device, turn o Bluetooth on unwanted devices,
then access the Bluetooth settings menu on the device you wish to use and
select ISBW348.
Water Resistance Level IPX5
• Protection from jets of water and gentle splashing.
IMPORTANT: To ensure your speaker is prepared for use in a wet environment,
disconnect and remove any power cables, and tightly close the cover on the rear of
the unit. If the cover is not properly closed, water resistance will be compromised
and could result in damage to the speaker or personal injury.
Charging the Battery
Requires a Micro-USB to USB cable (included).
Using a Micro-USB to USB cable (included), connect to the USB port of a powered
on computer or USB power adaptor to charge the unit. Charge fully before use.
WARNING: DO NOT, UNDER ANY CIRCUMSTANCES,
CHARGE THE SPEAKER WHILE IT IS NEAR WATER. ALLOW
AMPLE TIME TO DRY AFTER BEING SPLASHED.
Aux In
Requires a 3.5mm audio cable (included).
1. Connect a 3.5mm audio cable to the Aux In on the unit and the audio
output/headphone jack on a media player or smartphone. The Aux input
will be detected and the unit will automatically switch to Aux In mode
(indicated by the green Aux In LED on the top of the speaker).
2. Use the controls on the connected device to select and play audio.
DC IN AUX IN
INDICATOR LIGHT BATTERY STATUS
Red light ON Charging battery
Red light OFF Charging complete
Red light ashing Low battery, charge soon
Using the Speakerphone
1. To accept a call, press the Speakerphone button or use the controls on the
connected phone.
2. To end a call, press the Speakerphone button or use the controls on the
connected phone.
3. To redial the last dialed number, press the Speakerphone button twice.
ISBW348-2050-01-IB.indd 2 24/01/2018 11:54:56 AM