Imagine Panacea Lite User manual

Edition J
Delivering the Moment
Installation, Configuration, and Operation Manual
Panacea™ Lite
(P-12×1) Routing Switcher Series
P-12X1 MAN
February 2010

Publicaon Informaon
© 2014 Imagine Communicaons Corp. Proprietary and Condenal.
Imagine Communicaons considers this document and its contents to be proprietary and condenal.
Except for making a reasonable number of copies for your own internal use, you may not reproduce this
publicaon, or any part thereof, in any form, by any method, for any purpose, or in any language other
than English without the wrien consent of Imagine Communicaons. All others uses are illegal.
This publicaon is designed to assist in the use of the product as it exists on the date of publicaon of this
manual, and may not reect the product at the current me or an unknown me in the future. This pub-
licaon does not in any way warrant descripon accuracy or guarantee the use for the product to which it
refers.
Imagine Communicaons reserves the right, without noce to make such changes in equipment, design,
specicaons, components, or documentaon as progress may warrant to improve the performance of
the product.
Trademarks
Panacea™ is a trademark of Imagine Communications or its subsidiaries. Microsoft® and
Windows® are registered trademarks of Microsoft Corporation. All other trademarks and
trade names are the property of their respective companies.
Contact Informaon
Imagine Communicaons has oce locaons around the world. For locaons and contact informaon see:
hp://www.imaginecommunicaons.com/contact us/
Support Contact Informaon
For support contact informaon see:
▪Support Contacts: hp://www.imaginecommunicaons.com/services/technical support/
▪eCustomer Portal: hp://support.imaginecommunicaons.com

Panacea™ Lite
Panacea 12×1 Routing Switcher
Series
Installation, Configuration, and
Operation Manual
Edition J
February 2010

iii
Copyright © 2004-2007, 2008, 2010, Harris Corporation
Contents
Preface
Manual Information ............................................................................................x
Audience ......................................................................................................x
Revision History ............................................................................................x
Applications .................................................................................................x
Writing Conventions ...................................................................................xi
Obtaining Documents .................................................................................xi
Service Information ...........................................................................................xii
Unpacking a Product ..................................................................................xii
Servicing a Panacea Lite Product .................................................................xii
Returning a Product ...................................................................................xii
Standards xiii
Product Standards ..................................................................................... xiii
Compliance and Safety Standards ............................................................. xiv
EU Compliances ........................................................................................ xiv
Product Naming Conventions ........................................................................... xvi
Safety ............................................................................................................. xvii
Safety Terms and Symbols in this Manual ................................................. xvii
Introduction
Product Description............................................................................................. 1
Frame Architecture ............................................................................................ 2
Features ............................................................................................................. 3
Signal Formats ............................................................................................. 4
Modules ...................................................................................................... 4
Control Features .......................................................................................... 8
Frame Configuration and Installation
Frame Configuration ........................................................................................ 12
DIP Switch Summary ................................................................................. 12
Back Panel Connections ............................................................................ 13
Installing a Frame ............................................................................................. 18
Siting Requirements .................................................................................. 18

Contents
iv
Copyright © 2004-2007, 2008, 2010, Harris Corporation
Mounting Requirements ............................................................................ 19
In-Frame Architecture ................................................................................ 19
Control Functionality ................................................................................. 20
Power Supply ............................................................................................ 20
Installing a Panacea Lite Router ................................................................. 20
Installing Other Equipment ............................................................................... 21
Analog Video Looping Input Submodule (P12×1-VL) ................................. 21
Audio Signal Adapter (P12×1-DTB) ............................................................ 21
Serial Communications and Control Submodule (P12×1-SP) ...................... 22
Local Control Panel (P12×1-CP) ................................................................. 22
Remote Control Panel (P12×1-RCP) ........................................................... 22
Field Upgrading a Panacea Lite Routing Switcher .............................................. 23
Frame Operation
Control Features .............................................................................................. 26
Front Panel Options ................................................................................... 26
Firmware-Based Control System ................................................................ 26
Software-Based Control Systems ............................................................... 26
Control Functionality......................................................................................... 27
P12×1-SP Installation, Configuration, and Operation
Installing a P12×1-SP Submodule ..................................................................... 30
Preparing the Frame .................................................................................. 30
Mounting the P12×1-SP Module ............................................................... 30
Connecting the Ribbon Cable .................................................................... 31
Setting the DIP Switches ............................................................................ 32
Setting the RS-232/RS-422 Jumper ............................................................ 32
Reassembling the Frame ............................................................................ 32
Configuring a P12×1-SP Submodule ................................................................ 33
Changing Configurations .......................................................................... 33
Jumper Configuration Reference Point ...................................................... 34
Operating a P12×1-SP Submodule ................................................................... 35
SPT Configurations .................................................................................... 35
GVG®20-TEN™Control of Harris Routers: GVG20TOLXY ................................ 36
References ................................................................................................ 36
RS-232/RS-422 Jumper Orientation ........................................................... 37
DIP Switch Settings .................................................................................... 37
X-Y Control of GVG®Horizon™Routers:
LXYTOHORIZ .................................................................................................... 39
References ................................................................................................ 40
RS-232/RS-422 Jumper Orientation ........................................................... 40
DIP Switch Settings .................................................................................... 41
Additional Serial Ports for Harris Routers:
LSERIAL ............................................................................................................ 42
References ................................................................................................ 43

Panacea Lite Routing Switcher Series
Installation, Configuration, and Operation Manual
v
Copyright © 2004-2007, 2008, 2010, Harris Corporation
RS-232/RS-422 Jumper Orientation ........................................................... 43
DIP Switch Settings .................................................................................... 44
X-Y to BARCO VIVALDI™: LXYTOBARC ........................................................... 45
References ................................................................................................ 47
RS-232/RS-422 Jumper Orientation ........................................................... 47
DIP Switch Settings .................................................................................... 48
X-Y Control of Datatek®Routers:
LXYTODATEK ................................................................................................... 50
References ................................................................................................ 51
RS-232/RS-422 Jumper Orientation ........................................................... 51
DIP Switch Settings .................................................................................... 52
X-Y Control of GVG®20-TEN™Routers: LXYTOGVG20 ................................... 54
References ................................................................................................ 54
RS-232/RS-422 Jumper Orientation ........................................................... 55
DIP Switch Settings .................................................................................... 55
X-Y Control of a Remote Router via Modem:
LXYTOMODEM ................................................................................................ 57
References ................................................................................................ 57
RS-232/RS-422 Jumper Orientation ........................................................... 58
DIP Switch Settings .................................................................................... 58
X-Y Control of Megahertz®Under Monitor Displays:
LXYTOMHzUMD .............................................................................................. 60
Editing Text Displayed on the Megahertz UMD .......................................... 64
LXYTOMHzUMD Monitoring Levels ........................................................... 66
References ................................................................................................ 66
RS-232/RS-422 Jumper Orientation ........................................................... 66
DIP Switch Settings .................................................................................... 66
X-Y to Under Monitor Display Using TSL®Protocol:
LXYTOTSLUMD ................................................................................................ 68
References ................................................................................................ 74
RS-232/RS-422 Jumper Orientation ........................................................... 74
DIP Switch Settings .................................................................................... 75
X-Y Control of V-LAN™ Systems: LXYTOVLAN ................................................. 77
References ................................................................................................ 77
RS-232/RS-422 Jumper Orientation ........................................................... 77
DIP Switch Settings .................................................................................... 78
X-Y Control of XPRESS Routers:
LXYTOXPRS ..................................................................................................... 80
References ................................................................................................ 80
RS-232/RS-422 Jumper Orientation ........................................................... 80
DIP Switch Settings .................................................................................... 81
X-Y Control of Another X-Y P12×1-SP: LXYTOXY ............................................ 83
References ................................................................................................ 83
RS-232/RS-422 Jumper Orientation ........................................................... 83
DIP Switch Settings .................................................................................... 84

Contents
vi
Copyright © 2004-2007, 2008, 2010, Harris Corporation
X-Y Control of Remote Router via Modem: LXYTO4800 (Special 4800 or 9600 Baud
Rate) ................................................................................................................ 86
References ................................................................................................ 86
RS-232/RS-422 Jumper Orientation ........................................................... 87
DIP Switch Settings .................................................................................... 87
X-Y Control of Lightwave®Matrix-Hub
Series 1000™ Switcher: LXYTOLIGHTWAVE ..................................................... 89
System and Matrix-Hub Discovery .............................................................. 89
Detecting and Reporting Alarm Conditions ................................................ 90
Protocol Commands Handled Between X-Y and LXYTOLIGHTWAVE .......... 91
Protocol Commands Issued Between LXYTOLIGHTWAVE and Matrix-Hub .. 93
Other Information ..................................................................................... 93
References ................................................................................................ 94
RS-232/RS-422 Jumper Orientation ........................................................... 94
DIP Switch Settings .................................................................................... 95
X-Y Control of Sierra®Routing Switchers :
LXYTOSIERRA .................................................................................................. 96
System and Matrix Discovery ..................................................................... 96
Protocol Commands .................................................................................. 97
Other Information ..................................................................................... 99
References ................................................................................................ 99
RS-232/RS-422 Jumper Orientation ......................................................... 100
DIP Switch Settings .................................................................................. 100
X-Y Control of Sony®Control System :
LXYTOSONY .................................................................................................. 102
Machine Control Commands ................................................................... 102
Status Updates ........................................................................................ 103
Error Messages ........................................................................................ 105
RS-232/RS-422 Jumper Orientation ......................................................... 105
DIP Switch Settings .................................................................................. 105
X-Y to McCurdy® Under Monitor Displays:
LXYTOMCUMD .............................................................................................. 107
References .............................................................................................. 108
RS-232/RS-422 Jumper Orientation ......................................................... 109
DIP Switch Settings .................................................................................. 109
X-Y Control of NVISION®Routers:
LXYTONVIS .................................................................................................... 111
References .............................................................................................. 112
RS-232/RS-422 Jumper Orientation ......................................................... 112
DIP Switch Settings .................................................................................. 112
Panasonic®MARC TYPE II™ SQC Control of Harris Routers:
PANMIITOLXY ................................................................................................ 114
References .............................................................................................. 114
RS-232/RS-422 Jumper Orientation ......................................................... 115
DIP Switch Settings .................................................................................. 115
DIP Switch Settings Notes ........................................................................ 116

Panacea Lite Routing Switcher Series
Installation, Configuration, and Operation Manual
vii
Copyright © 2004-2007, 2008, 2010, Harris Corporation
Pro-Bel™ Controller for Harris Routers: PROBELTOLXY ................................... 117
Configuration Control ............................................................................. 117
Configuration Application Notes ............................................................. 117
Protocol Commands ................................................................................ 117
References .............................................................................................. 118
RS-232/RS-422 Jumper Orientation ......................................................... 118
DIP Switch Settings .................................................................................. 118
X-Y Control of Sandar®Routers:
SANDARTOLXY .............................................................................................. 120
Configuration Control ............................................................................. 120
Protocol Commands ................................................................................ 121
References .............................................................................................. 123
RS-232/RS-422 Jumper Orientation ......................................................... 123
DIP Switch Settings .................................................................................. 123
Tandberg™ Controller for Harris Routers:
TANDBERGTOLXY .......................................................................................... 125
Configuration Control ............................................................................. 125
Protocol Commands ................................................................................ 127
References .............................................................................................. 128
RS-232/RS-422 Jumper Orientation ......................................................... 128
DIP Switch Settings .................................................................................. 129
GVG TEN-XL™ Control of Harris Routers:
GVG TEN-XL .................................................................................................. 130
GVG TEN-XL ASCII Protocol ..................................................................... 131
GVG TEN-XL SMPTE Protocol ................................................................... 132
References .............................................................................................. 136
RS-232/RS-422 Jumper Orientation ......................................................... 136
DIP Switch Settings .................................................................................. 136
Specifications
Frame Specifications ...................................................................................... 140
Module Specifications .................................................................................... 141
Analog Audio (P-12×1A2) ....................................................................... 141
600Analog Audio (P-12×1A2L) ............................................................ 142
AES Audio, Balanced (P-12×1AEB) ........................................................... 143
AES Audio, Coaxial (P-12×1AEC) ............................................................. 144
Analog Video (P-12×1V) .......................................................................... 145
Analog Video/Stereo Analog Audio (P-12×1VA2) ..................................... 146
Analog Video/600Stereo Analog Audio (P-12×1VA2L) ......................... 147
Standard Definition Video (P-12×1S) ........................................................ 149
Standard Definition Video/Balanced AES Audio (P-12×1SAEB) ................. 150
Standard Definition Video/Coaxial AES Audio (P-12×1SAEC) .................... 151
High Definition /Standard Definition Video (P-12×1HS) ............................ 153
HS Video/Balanced AES Audio (P-12×1HSAEB) ......................................... 154
HS Video/Coaxial AES Audio (P-12×1HSAEC) ........................................... 155

Contents
viii
Copyright © 2004-2007, 2008, 2010, Harris Corporation
Appendix: Safety Precautions, Certifications, and
Compliances
Safety Terms and Symbols in this Manual........................................................ 157
Safety Terms and Symbols on the Product ...................................................... 158
Preventing Electrostatic Discharge................................................................... 158
Injury Precautions............................................................................................ 159
Product Damage Precautions ......................................................................... 160
EMC and Safety Standards ............................................................................. 161
EMC Standards ....................................................................................... 161
Additional EMC Information .................................................................... 162
Safety Standards ..................................................................................... 163
Appendix: Control Panel Installation and Operation
Installing a P12×1-CP Control Panel ............................................................... 166
Installing a P12×1-RCP Control Panel ............................................................. 167
Installing Key Cap Labels ................................................................................ 168
Choosing the Appropriate Configuration Mode ............................................. 170
P12×1-CP DIP Switch Configuration ............................................................... 171
P12×1-RCP DIP Switch Configuration ............................................................. 172
Operation ...................................................................................................... 173
Source Select ........................................................................................... 173
Destination Lock ...................................................................................... 174
Panel Enable ............................................................................................ 174
Breakaway Operation .............................................................................. 175
Index
Keywords ....................................................................................................... 179

ix
Copyright © 2004-2007, 2008, 2010, Harris Corporation
Preface
Panacea is the remedy that the industry has long sought for the frustrating
compromises traditionally associated with meeting small routing needs:
Economical or flexible? Compact or multiformat? Affordable solution for today's
routing requirements or sizeable investment into future-proofed technology? You
couldn't have it all — until now.
The exciting Panacea Lite product line encompasses an entirely new family of
routing switchers.
It’s today’s routing platform for tomorrow’s next generation requirements.
It’s a future-proofed, economical and compact, easy to use, multi/
mixed-format router, offering flexible configurations/options for utility and
on-air applications.
It’s a piece of “glue” that fits your small routing needs today and provides you
with the tools you need to embrace the future.
The Panacea Lite routing switcher series is designed to add a new tier of up to
32×32 routing matrices.

Preface
x
Copyright © 2004-2007, 2008, 2010, Harris Corporation
Manual
Information
This manual details the features, installation, operation, maintenance, and
specifications for the Panacea Lite routing switcher series.
Audience This manual is written for technicians and operators responsible for installation,
setup, maintenance, and/or operation of the product, and is useful to operations
personnel for purposes of daily operation and reference.
Revision History
Applications The Panacea Lite platform is ideal for space-constrained operations demanding full
local and remote control capabilities in a routing solution.
Panacea Lite products are perfect for
Television production facilities
Cable operators
Production and post-production facilities
Outside broadcast vans/trucks
DBS satellite operations
Table P-1 Revision History of Manual
Edition Date Comments
A June 2004 Initial production release
B July 2004 Added information about audio signal adapter
option
C October 2004 Added cautionary information about X-Y bus
termination
D December 2004 Added locational information about serial
control commands; added index; added
information on labeling panel keys
E June 2005 Added information about P12×1-SP; removed
information referring to audio signal adapter
and P12×1-SP as options
F December 2005 Added specifications for P-12×1A2L and
P-12×1VA2L; added information about
installation of P12X1-VL analog video looping
submodule
G January 2006 Added information about P-12×1AEB and
P-12×1AEC options
H May 2006 Formatting changes
I September 2007 Updated P12×1-CP DIP switch configuration
J February 2010 Removed return loss information from
P-12×1HS specification

Panacea Lite Routing Switcher Series
Installation, Configuration, and Operation Manual
xi
Copyright © 2004-2007, 2008, 2010, Harris Corporation
Webcasters
Telcos where professional end-users require a small, flexible, high quality
routing matrix with the ability to mix and match signal formats and/or signal
processing functions within the same frame
Writing
Conventions
To enhance your understanding, the authors of this manual have adhered to the
following text conventions:
Obtaining
Documents
Technical documents can be viewed or downloaded from our website.
Alternatively, contact your Customer Service representative to request a document.
Table P-2 Writing Conventions
Term or
Convention Description
Bold Indicates dialog boxes, property sheets, fields, buttons,
check boxes, list boxes, combo boxes, menus, submenus,
windows, lists, and selection names
Italics Indicates email addresses, the names of books or
publications, and the first instances of new terms and
specialized words that need emphasis
CAPS Indicates a specific key on the keyboard, such as ENTER,
TAB, CTRL, ALT, or DELETE
Code Indicates variables or command-line entries, such as a DOS
entry or something you type into a field
> Indicates the direction of navigation through a hierarchy of
menus and windows
hyperlink Indicates a jump to another location within the electronic
document or elsewhere
Internet address Indicates a jump to a website or URL
NOTE: Indicates important information that helps to avoid and
troubleshoot problems

Preface
xii
Copyright © 2004-2007, 2008, 2010, Harris Corporation
Service
Information
Unpacking a
Product
This product was carefully inspected, tested, and calibrated before shipment to
ensure years of stable and trouble-free service.
1Check equipment for any visible damage that may have occurred during
transit.
2Confirm that you have received all items listed on the packing list.
3Contact your dealer if any item on the packing list is missing.
4Contact the carrier if any item is damaged.
5Remove all packaging material from the product and its associated
components before you install the unit.
Keep at least one set of original packaging, in the event that you need to return a
product for servicing.
Servicing a
Panacea Lite
Product
The Panacea Lite product line is not designed for extensive field service. Return
your Panacea product to the service center for most hardware upgrades,
modifications, or repairs.
You can install and configure these options on-site. Contact Customer Services for
more information about ordering these options.
Analog video looping input submodule (P12X1-VL) (see page 7 for a
description)
Local control panel (P12X1-CP) (see page 8 for a description)
Remote control panel (P12X1-RCP) (see page 8 for a description)
Serial communications and control submodule (P12X1-SP) (see page 7 for a
description)
Returning a
Product
In the unlikely event that your product fails to operate properly, please contact
Customer Service to obtain a Return Authorization (RA) number, then send the
unit back for servicing.
Keep at least one set of original packaging in the event that a product needs to be
returned for service. If the original package is not available, you can supply your
own packaging as long as it meets the following criteria:
The packaging must be able to withstand the product’s weight.
The product must be held rigid within the packaging.
There must be at least 2 in. (5 cm) of space between the product and the
container.
The corners of the product must be protected.

Panacea Lite Routing Switcher Series
Installation, Configuration, and Operation Manual
xiii
Copyright © 2004-2007, 2008, 2010, Harris Corporation
Ship products back to us for servicing prepaid and, if possible, in the original
packaging material. If the product is still within the warranty period, we will return
the product prepaid after servicing.
Standards There are three different types of standards listed: product standards, compliance
standards, and safety standards.
Product
Standards
Product standards for each routing switcher type are listed below.
Analog Audio ANSI/SMPTE RP120
For Analog Audio Inter-Modulation Testing (IMD)
Analog Video SMPTE170M
Composite Analog Video Signal-NTSC for Studio Applications
SMPTE240M
Signal Parameters 1125-Line High-Definition Production Systems
ITU-R BT.470-6
Conventional Television System
SMPTE PR168
Definition of Vertical Interval Switching Point for Synchronous Video Switching
AES Audio, Balanced
Configuration
AES3-2003
AES Recommended Practice for Digital Audio Engineering — Serial
Transmission Format for Two-Channel Linearly Represented Digital Audio Data
AES Audio, Coax
Configuration
AES3id-2001
AES Information Document for Digital Audio Engineering — Transmission of
AES3 Formatted Data by Unbalanced Coaxial Cable
SMPTE 276M-1995
SMPTE Standard for Television — Transmission of AES-EBU Digital Audio
Signals Over Coaxial Cable
HS/S SMPTE 259M
SMPTE Standard for Television - 10-Bit 4:2:2 Component and 4fsc Composite
Digital Signals - Serial Digital Interface
SMPTE 292M
SMPTE Standard for Television - Bit-Serial Digital Interface for High Definition
Television Systems
SMPTE 344M
SMPTE Standard for Television - 540 Mb/s Serial Digital Interface

Preface
xiv
Copyright © 2004-2007, 2008, 2010, Harris Corporation
DVB-ASI
Digital Video Broadcasting Interfaces for CATV/SMATV Headends and Similar
Professional Equipment
Compliance and
Safety Standards
Appendix A, Safety Precautions, Certifications, and Compliances contains
product compliance and safety standards.
EU Compliances
Restriction on
Hazardous
Substances (RoHS)
Compliance
Directive 2002/95/EC—commonly known as the European Union (EU) Restriction
on Hazardous Substances (RoHS)—sets limits on the use of certain substances
found in electrical and electronic equipment. The intent of this legislation is to
reduce the amount of hazardous chemicals that may leach out of landfill sites or
otherwise contaminate the environment during end-of-life recycling. The Directive,
which took effect on July 1, 2006, refers to the following hazardous substances:
Lead (Pb)
Mercury (Hg)
Cadmium (Cd)
Hexavalent Chromium (Cr-V1)
Polybrominated Biphenyls (PBB)
Polybrominated Diphenyl Ethers (PBDE)
According to this EU Directive, all products sold in the European Union will be fully
RoHS-compliant and “lead-free.” (See our website for more information on dates
and deadlines for compliance.) Spare parts supplied for the repair and upgrade of
equipment sold before July 1, 2006 are exempt from the legislation. Equipment
that complies with the EU directive will be marked with a RoHS-compliant emblem,
as shown in Figure P-1.
Figure P-1 RoHS Compliance Emblem
Waste from
Electrical and
Electronic
Equipment (WEEE)
Compliance
The European Union (EU) Directive 2002/96/EC on Waste from Electrical and
Electronic Equipment (WEEE) deals with the collection, treatment, recovery, and
recycling of electrical and electronic waste products. The objective of the WEEE
Directive is to assign the responsibility for the disposal of associated hazardous
waste to either the producers or users of these products. Effective August 13,
2005, producers or users will be required to recycle electrical and electronic
equipment at end of its useful life, and may not dispose of the equipment in
landfills or by using other unapproved methods. (Some EU member states may
have different deadlines.)

Panacea Lite Routing Switcher Series
Installation, Configuration, and Operation Manual
xv
Copyright © 2004-2007, 2008, 2010, Harris Corporation
In accordance with this EU Directive, companies selling electric or electronic devices
in the EU will affix labels indicating that such products must be properly recycled.
(See our website for more information on dates and deadlines for compliance.)
Contact your local Sales representative for information on returning these products
for recycling. Equipment that complies with the EU directive will be marked with a
WEEE-compliant emblem, as shown in Figure P-2
Figure P-2 WEEE Compliance Emblem

Preface
xvi
Copyright © 2004-2007, 2008, 2010, Harris Corporation
Product
Naming
Conventions
Throughout this manual, Panacea Lite series products are referred to by specific
names; for example., P-12×1V, P-12×1VA2. Table P-3 lists each product
description and its corresponding specific name.
Table P-3 Panacea Lite Product Naming Conventions
Product Description Product Name
Analog audio - standard
Analog audio - 600
P-12×1A2
P-12×1A2L
AES audio - balanced
AES audio - coax
P-12×1AEB
P-12×1AEC
Analog video
Analog video / stereo analog audio -
standard
Analog video / 600stereo analog audio
P-12×1V
P-12×1VA2
P-12×1VA2L
Standard definition (S) video
S video / balanced AES
S video / coaxial AES
P-12×1S
P-12×1SAEB
P-12×1SAEC
High definition (HS) video
HS video / balanced AES
HS video / coaxial AES
P-12×1HS
P-12×1HSAEB
P-12×1HSAEC

Panacea Lite Routing Switcher Series
Installation, Configuration, and Operation Manual
xvii
Copyright © 2004-2007, 2008, 2010, Harris Corporation
Safety Carefully review all safety precautions to avoid injury and prevent damage to this
product or any products connected to it. You will find a complete list of safety
precautions in Appendix A. Any user-serviceable components (such as fuses or
batteries) are only replaceable by those components listed in the manual.
IMPORTANT! Only qualified personnel should perform service procedures.
Safety Terms and
Symbols in this
Manual
WARNING: Statements identifying conditions or practices that may
result in personal injury or loss of life. High voltage is present.
CAUTION: Statements identifying conditions or practices that can
result in damage to the equipment or other property.

Preface
xviii
Copyright © 2004-2007, 2008, 2010, Harris Corporation

1
Copyright © 2004-2007, 2008, 2010, Harris Corporation
1Introduction
This chapter includes the following topics:
Control Features on page 8
Features on page 3
Modules on page 4
Product Description on page 1
Features on page 3
Product Description
The Panacea Lite series consists of dual- or single-format routing switchers with the
capability to meet the multiple format signal switching requirements of today’s
market. Panacea Lite routing switchers are available in a 1RU frame size. The frame
architecture provides both front and rear rack attachment capabilities, which
allows for complementary front-racked local control in the same rack space, as
well as more flexible systemization.