IMC EL-USB-1 User manual

Another solution from The IMC Group Ltd.
Pendle House, Jubilee Road, Letchworth, Hertfordshire SG6 1SP
Tel: [phone] | Email: [email protected] | Visit: www.the-imcgroup.com
USB DATALOGGERS QUICK START GUIDE
EASYLOG
EASYLOG USB DATA
LOGGERS
QUICK START GUIDE
Windows™ XP/VISTA/7/8
(32 & 64bit)
Visit www.easylogusb.com and click ‘Begin Software Download’.
• Insert the data logger into an available USB port on your PC.
• Double click on the EasyLog USB icon on your Windows™
desktop. This will load the configuration software. Set up the data
logger for a new session, download a data logger that has been
recording, view previously saved data in graph format and check
the current status of the attached data logger.
• When setup is complete, the data logger should be removed from
the USB port. Do not leave your data logger in the USB port
for extended periods as this will cause some of the battery
capacity to be lost (with the exception of EL-USB-1-RCG).
• Full specifications on your EasyLog product, including LED and
LCD status indication (where applicable), can be found on the
product’s datasheet at www.the-imcgroup.com
• If you would like advice on how best to use the data logger
for a particular application, please contact your nearest IMC
representative. Further information can also be found in the Help
Topics with in the EasyLog software.
DOWNLOAD AND INSTALL
SOFTWARE
USING THE SOFTWARE
Follow the instructions found in ‘Installing EL-WIN-USB on Windows’
(link on website).

Another solution from The IMC Group Ltd.
Pendle House, Jubilee Road, Letchworth, Hertfordshire SG6 1SP
Tel: [phone] | Email: [email protected] | Visit: www.the-imcgroup.com
USB DATALOGGERS QUICK START GUIDE
Your data logger is provided with a 3.6V 1/2AA battery already installed.
You can change the battery by following the instructions below.
Replacement batteries are available from www.the-imcgroup.com
EL-USB-1 PRO
Before using the data logger you will need to insert the 3.6V
2/3AA High Temperature battery provided, following the
instructions below. Replacement batteries are available from
www.the-imcgroup.com.
11 22
33 44
EL-USB
Simple Low Cost Data Logging
• USB interface for configuration and
download
• Easy to use Windows control
software
REPLACING YOUR DATA
LOGGER’S BATTERY

Another solution from The IMC Group Ltd.
Pendle House, Jubilee Road, Letchworth, Hertfordshire SG6 1SP
Tel: [phone] | Email: [email protected] | Visit: www.the-imcgroup.com
USB DATALOGGERS QUICK START GUIDE
For a full product data sheet for your data logger
or for more information on the rest of the EasyLog range visit
www.the-imcgroup.com
IMPORTANT SAFETY INFORMATION
Repairing or Modifying
Never attempt to repair or modify EasyLog
products. Dismantling them, other than
for the purpose of changing replaceable
batteries, may cause damage that is not
covered under the warranty. Servicing should
only be provided by an authorised supplier.
Disposal and Recycling Information
You must dispose of EasyLog products
in accordance with relevant laws and
regulations. They contain electronic
components and lithium batteries and
therefore must be disposed of separately
from household waste.
Need help with your data logger?
The IMC Group Ltd
Pendle House,
Jubilee Road,
Letchworth,
Hertfordshire,
SG6 1SP,
United Kingdom
Tel: [phone]
Email: [email protected]