Immergas MINI NIKE X 24 3 E Operating instructions

MINI EOLO
X 24 3 E
Instruction and
recommendation booklet
*1.048120ENG*
*1.048120ENG*
IE
STD.010251/000

STD.010251/000

Dear Client,
Our compliments for having chosen a top-quality Immergas product, able to assure well-being and safety for a long period of time. As an Immergas customer
you can also count on a qualied aer-sales service, prepared and updated to guarantee constant eciency of your boiler. Read the following pages carefully: you
will be able to draw useful suggestions regarding the correct use of the appliance, the respect of which, will conrm your satisfaction for the Immergas product.
For assistance and scheduled maintenance contact Authorised Immergas Aer-Sales centres: they have original spare parts and are specically trained directly
by the manufacturer.
General recommendations
All Immergas products are protected with suitable transport packaging.
e material must be stored in dry environments protected against bad weather.
e instruction book is an integral and essential part of the product and must be consigned to the new user also in the case of transfer or succession of ownership.
It must be stored with care and consulted carefully, as all of the warnings provide important safety indications for installation, use and maintenance stages.
is instruction manual provides technical information for installing the Immergas kit. As for the other issues related to boiler installation (e.g. safety in the
work site, environment protection, injury prevention), it is necessary to comply with the provisions specied in the current regulation and technical standards.
In compliance with legislation in force, the systems must be designed by qualied professionals, within the dimensional limits established by the Law. Installation
and maintenance must be performed in compliance with the regulations in force, according to the manufacturer's instructions and by professionally qualied
sta, intending sta with specic technical skills in the plant sector, as envisioned by the Law.
Improper installation or assembly of the Immergas appliance and/or components, accessories, kit and devices can cause unexpected problem to persons, animals
and objects. Read the instructions provided with the product carefully to ensure a proper installation.
Maintenance must be carried out by skilled technical sta. e Immergas Authorised Aer-sales Service represents a guarantee of qualications and
professionalism.
e appliance must only be destined for the use for which it has been expressly declared. Any other use will be considered improper and therefore potentially
dangerous.
If errors occur during installation, operation and maintenance, due to non compliance with technical laws in force, standards or instructions contained in this
book (or however supplied by the manufacturer), the manufacturer is excluded from any contractual and extra-contractual liability for any damages and the
appliance warranty is invalidated.
e manufacturer declines all liability due to printing or transcription errors, reserving the right to make any modications to its technical and commercial
documents without forewarning.
Product not intended for EU countries
STD.010251/000

INDEX
USER pageINSTALLER page MAINTENANCE TECHNICIAN page
1 Installation boiler......................................5
1.1 Installation recommendations.................5
1.2 Main dimensions.......................................6
1.3 Anti-freeze protection. .............................6
1.4 connections................................................ 7
1.5 Remote controls and room chrono-
thermostats (Optional).............................8
1.6 External probe (Optional). ......................8
1.7 Immergas ue systems..............................9
1.8 Tables of Resistance Factors and
Equivalent Lengths. ................................10
1.9 Outdoor installation in partially
protected area. .........................................11
1.10 Concentric horizontal kit installation. .12
1.11 Concentric vertical kit installation. ......13
1.12 Separator kit installation. .......................14
1.13 Conguration type B, open chamber and
forced draught for indoors.....................16
1.14 Flue exhaust to ue/chimney.................16
1.15 Ducting of ues or technical slots.........16
1.16 Flues, chimneys and chimney caps.......16
1.17 System lling............................................16
1.18 Gas system start-up.................................16
1.19 Boiler start up (ignition). .......................16
1.20 Circulation pump....................................17
1.21 Kits available on request.........................17
1.22 Boiler components..................................18
2 Instructions for use and maintenance..19
2.1 Cleaning and maintenance. ...................19
2.2 General warnings....................................19
2.3 Control panel...........................................19
2.4 Using the boiler........................................20
2.5 Fault and anomaly signals......................20
2.6 Boiler shutdown ......................................21
2.7 Restore heating system pressure............21
2.8 Draining the system................................21
2.9 Anti-freeze protection. ...........................21
2.10 Case cleaning...........................................21
2.11 Decommissioning. ..................................21
3 Commissioning the boiler
(initial check)...........................................22
3.1 Hydraulic Diagram. ................................22
3.2 Wiring diagram.......................................23
3.3 Troubleshooting ......................................23
3.4 Information Menu. .................................24
3.5 Programming the P.C.B..........................24
3.6 Converting the boiler to other types
of gas. ........................................................25
3.7 Checks following conversion to another
type of gas.................................................25
3.8 Possible adjustments...............................26
3.9 Automatic slow ignition function
with timed ramp delivery.......................26
3.10 "Chimney sweep function". ...................26
3.11 Pump anti-block function......................26
3.12 three-way anti-block system..................26
3.13 Radiators anti-freeze function...............26
3.14 P.C.B. periodical self-check....................26
3.15 Solar panels coupling function..............26
3.16 Casing removal........................................27
3.17 Yearly appliance check and
maintenance.............................................29
3.18 Variable heat output................................29
Fan power: 30W ......................................29
3.19 Combustion parameters.
Fan power: 30W ......................................29
3.20 Technical data.
Fan power: 30W ......................................30
3.21 Variable heat output.
Fan power: 33W / 39W ..........................31
3.22 Combustion parameters.
Fan power: 33W / 39W ..........................31
3.23 Technical data.
Fan power: 33W / 39W ..........................31
3.24 Data plate key............................................32
STD.010251/000

5
1-1
1INSTALLATION BOILER
1.1 INSTALLATION
RECOMMENDATIONS.
e Mini Eolo X 24 3E boiler has been designed
for wall mounted installation only; for heating
environments and production of domestic hot
water for domestic use and similar purposes.
e place of installation of the appliance and
relative Immergas accessories must have suitable
features (technical and structural) such to allow
(always in safety, eciency and easy conditions):
- installation (according to the provisions of
technical legislation and technical regulations);
- maintenance operations (including scheduled,
periodic, routine, special);
- removal (to outdoors in the place for
loading and transporting the appliances
and components) as well as the eventual
replacement of those with appliances and/or
equivalent components.
e wall surface must be smooth, without any
protrusions or recesses enabling access to the
rear part. ey are NOT designed to be installed
on plinths or oors (Fig. 1-1).
By varying the type of installation the
classication of the boiler also varies, precisely:
- Boiler type B22, if installed without the 2
intake caps and with the top cover kit.
- Boiler type C, if installed using concentric
pipes or other types of pipes envisioned for
the sealed chamber boiler for intake of air and
expulsion of fumes.
Only professionally enabled heating/plumbing
technicians are authorised to install Immergas
gas appliances. Installation must be carried
out according to regulation standards, current
legislation and in compliance with local
technical regulations and the required technical
procedures.
Attention: the manufacturer declines all liability
for damages caused by boilers removed from
other systems or for any non-conformities of
such equipment.
Before installing the appliance, ensure that it
is delivered in perfect condition; if in doubt,
contact the supplier immediately. Packing
materials (staples, nails, plastic bags, polystyrene
foam, etc.) constitute a hazard and must be kept
out of the reach of children. If the appliance
is installed inside or between cabinets, ensure
sucient space for normal servicing; therefore
it is advisable to leave clearance of at least 3
cm between the boiler casing and the vertical
sides of the cabinet. Leave adequate space above
the boiler for possible water and ue removal
connections.
Keep all flammable objects away from the
appliance (paper, rags, plastic, polystyrene, etc.).
Do not place household appliances underneath
the boiler as they could be damaged if the safety
valve intervenes with obstructed conveying
system (the safety valve must be conveyed away
by a draining funnel), or if there are leaks from
the hydraulic connections; on the contrary, the
manufacturer cannot be held responsible for any
damage caused to the household appliances. For
the aforementioned reasons, we recommend not
placing furnishes, furniture, etc.under the boiler.
In the event of malfunctions, faults or incorrect
operation, turn the appliance o immediately
and contact a qualified technician (e.g. the
Immergas Technical Aer-Sales Centre, which
has specically trained sta and original spare
parts) Do not attempt to modify or repair the
appliance alone. Failure to comply with the above
implies personal responsibility and invalidates
the warranty.
• Installation Standards:
- is boiler can be installed outdoors in a
partially protected area. A partially protected
area is one in which the appliance is not
exposed to the direct action of the weather
(rain, snow, hail, etc..).
- Installation in places with a fire risk is
prohibited (for example: garages, closed
parking stalls), gas appliances and relative ue
ducts, ue exhaust pipes and combustion air
intake pipes.
- Installation is prohibited on the vertical
projection of the cooking surface.
- Installation is also prohibited in places/
environments that constitute common parts
of oce condominiums such as stairs, cellars,
entrance halls, attics, los, escape routes,
etc. if they are not located inside technical
compartments under the responsibility of
each individual building and only accessible
to the user (for the features of the technical
rooms, see the regulation in force.
Attention: wall mounting of the boiler must
guarantee stable and ecient support for the
generator.
e plugs (standard supply) are to be used only in
conjunction with the mounting brackets or xing
template to x the appliance to the wall; they only
ensure adequate support if inserted correctly
(according to technical standards) in walls made
of solid or semi-hollow brick or block. In the
case of walls made from hollow brick or block,
partitions with limited static properties, or in any
case walls other than those indicated, a static test
must be carried out to ensure adequate support.
N.B.: the hex head screws supplied in the blister
pack are to be used exclusively to x the relative
mounting bracket to the wall.
ese boilers are used to heat water to below
boiling temperature in atmospheric pressure.
They must be attached to a heating system
suitable for their capacity and voltage.
They cannot be connected directly to low-
temperature systems.
YES NO
STD.010251/000

6
1-2
1.2 MAIN DIMENSIONS.
1.3 ANTIFREEZE PROTECTION.
Minimum temperature -5°C. Minimum
temperature -5°C. e boiler is supplied with
an anti/freeze function as standard that activates
the pump and burner when the system water
temperature in the boiler falls below 4°C.
e anti-freeze function is only guaranteed if:
- the boiler is correctly connected to gas and
electricity power supply circuits;
- the boiler is powered constantly;
- the boiler is not in 'no ignition block' mode
(Par. 2.5);
- the boiler essential components are not faulty.
In these conditions the boiler is protected against
freezing to an ambient temperature of -5°C.
Minimum temperature -15°C. If the boiler is
installed in a place where the temperature falls
below -5°C and in the event there is no gas (or
the boiler goes into ignition block), the appliance
can freeze.
To prevent the risk of freezing follow the
instructions below:
- protects the central heating circuit from
freezing by introducing a top quality anti-freeze
liquid into this circuit, which is not noxious to
health. e instructions of the manufacturer
of this liquid must be followed scrupulously
regarding the percentage necessary with
respect to the minimum temperature at which
the system must be kept. An aqueous solution
must be made with potential pollution class of
water 2.
e materials used for the central heating circuit
of Immergas boilers resist ethylene and propylene
glycol based antifreeze liquids (if the mixtures are
prepared perfectly).
For life and possible disposal, follow the
supplier's instructions.
- Protect the condensate drain trap and circuit
board against freezing by using an accessory
that is supplied on request (anti-freeze kit)
comprising two electric heating elements,
the relevant cables and a control thermostat
(carefully read the installation instructions
contained in the accessory kit pack).
Boiler anti-freeze protection is thus ensured only if:
- the boiler is correctly connected to electricity
power supply circuits;
- the main switch is on;
- the anti-freeze kit components are ecient.
In these conditions the boiler is protected against
freezing to temperature of -15°C.
The warranty does not cover damage due to
interruption of the electrical power supply and
failure to comply with that stated on the previous
page.
N.B.: if the boiler is installed in places where
the temperature falls below 0°C, the heating
attachment pipes must be insulated.
Key:
V - Electrical connection
G - Gas supply
RU - Cylinder unit return (optional)
MU - Cylinder unit ow (optional)
RR - System lling
R - System return
M - System ow
N.B.: connection group (optional)
Height
(mm)
Width
(mm)
Depth
(mm)
781 440 240
CONNECTIONS
GAS WATER SYSTEM
G RR R M
3/4” 1/2” 3/4” 3/4”
STD.010251/000

7
1-3
CAVO ALIMENTAZIONE
1.4 CONNECTIONS.
Gas connection
(Appliance category II2H3+).
Our boilers are designed to operate with methane
gas (G20) or LPG. Supply pipes must be the same
as or larger than the 3/4”G boiler tting. Before
connecting the gas line, carefully clean inside
all the fuel feed system pipes to remove any
residue that could impair boiler eciency. Also
make sure the gas corresponds to that for which
the boiler is prepared (see boiler data-plate).
If dierent, the appliance must be converted
for operation with the other type of gas (see
converting appliance for other gas types). e
dynamic gas supply (methane or LPG) pressure
must also be checked according to the type used
in the boiler, which must be in compliance, as
insucient levels can reduce generator output
and cause malfunctions.
Ensure correct gas cock connection. e gas
supply pipe must be suitably dimensioned
according to current regulations in order to
guarantee correct gas ow to the burner even
in conditions of maximum generator output
and to guarantee appliance eciency (technical
specifications). The coupling system must
conform to standards.
Fuel gas quality. The appliance has been
designed to operate with gas free of impurities;
otherwise it is advisable to fit special filters
upstream from the appliance to restore the
purity of the gas.
Storage tanks (in case of supply from LPG
depot).
- New LPG storage tanks may contain residual
inert gases (nitrogen) that degrade the mixture
delivered to the appliance casing functioning
anomalies.
- Due to the composition of the LPG mixture,
layering of the mixture components may occur
during the period of storage in the tanks. is
can cause a variation in the heating power of
the mixture delivered to the appliance, with
subsequent change in its performance.
Hydraulic connection.
Attention: In order not to void the warranty
before making the boiler connections, carefully
clean the heating system (pipes, radiators, etc.))
with special pickling or de-scaling products to
remove any deposits that could compromise
correct boiler operation.
A chemical treatment of the thermal system
water is required, in compliance with the
technical standards in force, in order to protect
the system and the appliance from deposits (e.g.,
lime scale), slurry or other hazardous deposits.
Water connections must be made in a rational
way using the couplings on the boiler template.
e boiler safety valve outlet must be connected
to a draining funnel. Otherwise, the manufacturer
declines any responsibility in case of ooding if
the drain valve cuts in.
Important: the manufacturer declines all liability
in the event of damage caused by the installation
of an automatic lling system.
Attention: to preserve the duration of appliance
eciency features, in the presence of water whose
features can lead to the deposit of lime scale,
installation of the “polyphosphate dispenser” kit
is recommended.
Electrical connection. e "Mini Eolo X 24 3E"
boiler has an IPX5D protection rating for the
entire appliance. Electrical safety of the appliance
is reached only when it is correctly connected
to an ecient earthing system as specied by
current safety standards.
Attention: the manufacturer declines any
responsibility for damage or physical injury
caused by failure to connect the boiler to an
ecient earth system or failure to comply with
the reference standards.
Also ensure that the electrical installation
corresponds to maximum absorbed power
specications as shown on the boiler data-plate.
Boilers are supplied complete with a special “X”
type power cable without plug. e power supply
cable must be connected to a 230V ±10% / 50Hz
mains supply respecting L-N polarity and earth
connection ; this network must also have a
multi-pole circuit breaker with class III over-
voltage category. When replacing the power
supply cable, contact a qualied technician (e.g.
the Immergas Aer-Sales Technical Assistance
Service). e power cable must be laid as shown
(Fig. 1-3).
In the event of mains fuses replacement on the
connection board, use a 3.15A quick-blow fuses.
For the main power supply to the appliance,
never use adapters, multiple sockets or extension
leads.
POWER CABLE
STD.010251/000

8
45
31
58
1-4
1-6
1-5
1.5 REMOTE CONTROLS AND
ROOM CHRONOTHERMOSTATS
OPTIONAL.
e boiler is prepared for the application of room
chrono-thermostats or remote controls, which
are available as optional kits (Fig. 1-4).
All Immergas chrono-thermostats are connected
with 2 wires only. Carefully read the user and
assembly instructions contained in the accessory
kit.
• On/O digital chrono-thermostat. e chrono-
thermostat allows:
- set two room temperature value: one for day
(comfort temperature) and one for night
(lower temperature);
- set a weekly programme with four daily
switch on and switch o times;
- selecting the required function mode from
the various possible alternatives:
- manual mode (with adjustable temperature).
- automatic mode (with set programme).
- forced automatic mode (momentarily
changing the temperature of the automatic
programme).
e chrono-thermostat is powered by two 1.5V
LR 6 type alkaline batteries.
• Comando Amico Remoto Remote Control
DeviceV2 (CARV2) with climate chrono-
thermostat function. In addition to the
functions described in the previous point, the
CARV2 panel enables the user to control all the
important information regarding operation
of the appliance and the heating system with
the opportunity of easily intervening on the
previously set parameters without having to
go to the place where the appliance is installed.
e panel is provided with self-diagnosis to
display any boiler functioning anomalies.
e climate chrono-thermostat incorporated
into the remote panel enables the system ow
temperature to be adjusted to the actual needs
of the room being heated, in order to obtain
the desired room temperature with extreme
precision and therefore with evident saving in
running costs. e chrono-thermostat is fed
directly by the boiler by means of the same 2
wires used for the transmission of data between
boiler and chrono-thermostat.
Comando Amico Remoto Remote ControlV2
or On/Off chrono-thermostat electrical
connections (Optional). The operations
described below must be performed aer having
removed the voltage from the appliance. Any
thermostat or On/Off environment chrono-
thermostat must be connected to clamps 40 and
41 eliminating jumper X40 (Fig. 3-2). Make sure
that the On/O thermostat contact is “dry”, i.e.
independent of the mains supply, otherwise the
P.C.B. would be damaged. Any Comando Amico
Remoto remote controlV2 must be connected to
clamps 40 and 41 eliminating jumper X40 on the
circuit board, paying attention not to invert the
connections (Fig. 3-2).
Important: if the Remote Friend Control, remote
controlV2 or any other On/O chrono-thermostat
is used arrange two separate lines in compliance
with current regulations regarding electrical
systems. No boiler pipes must ever be used to
earth the electric system or telephone lines.
Ensure elimination of this risk before making
the boiler electrical connections.
1.6 EXTERNAL PROBE OPTIONAL.
e boiler is designed for the application of the
Room ermostat (Fig. 1-5) which is available as
an optional kit. Refer to the relative instruction
sheet for positioning of the external probe.
e probe can be connected directly to the boiler
electrical system and allows the max. system
ow temperature to be automatically decreased
when the external temperature increases, in
order to adjust the heat supplied to the system
according to the change in outdoor temperature.
e external probe always acts when connected
independently from the presence or type of room
thermostat used. e correlation between system
flow temperature and outdoor temperature
is determined by the position of the selector
switch on the boiler control panel according to
the curves shown in the diagram (Fig. 1-6). e
electric connection of the external probe must be
made on clamps 38 and 39 on the boiler P.C.B.
(Fig. 3-2).
Position of the central heating temperature
user adjustment
STD.010251/000

9
1-7
2
1
1-8
1-9
1.7 IMMERGAS FLUE SYSTEMS.
Immergas supplies various solutions separately
from the boilers regarding the installation of air
intake terminals and ue extraction, which are
fundamental for boiler operation.
Attention: the boiler must only be installed
together with an original Immergas air intake
and ue gas exhaust system, in compliance
with the standards in force. is system can be
identied by an identication mark and special
distinctive marking bearing the note " not for
condensing boilers".
e ue exhaust pipes must not be in contact with
or be near to ammable materials. Moreover,
they must not pass through buildings or walls
made of ammable material.
See following paragraphs for the detailed
description of the kits available.
Positioning of double lip seals. For correct
positioning of lip seals on elbows and extensions,
follow the direction of assembly given in gure
(Fig. 1-7).
• Resistance factors and equivalent lengths.
Each ue component has a Resistance Factor
based on experimental tests and specified
in the table below. e Resistance Factor for
individual components is independent from
the type of boiler on which it is installed
and has a dimensionless size. It is however,
conditioned by the temperature of the uids
that pass through the pipe and therefore,
varies according to applications for air intake
or ue exhaust. Each single component has a
resistance corresponding to a certain length
in metres of pipe of the same diameter; the
so-called equivalent length, obtained from
the ration between the relative Resistance
Factors. All boilers have an experimentally
obtainable maximum Resistance Factor equal to
100. e maximum Resistance Factor allowed
corresponds to the resistance encountered with
the maximum allowed pipe length for each
type of Terminal Kit. is information allows
calculations to be made to verify the possibility
of setting up various ue congurations.
• Coupling of extension pipes. To install any
push-t extensions with other ue extraction
elements, it is necessary to do the following:
install the concentric pipe or elbow with the
male side (smooth) on the female section
(with lip seal) to the end stop on the previously
installed element. is will ensure the sealing
and joining of the elements correctly.
Attention: if the exhaust terminal and/or
extension concentric pipe needs shortening,
consider that the internal duct must always
protrude by 5 mm with respect to the external
duct.
Diaphragm installation.
Attention: based on the boiler model (checking
which type of fan is installed), use appropriate
diaphragms.
For correct functioning of the boiler it is
necessary to install a diaphragm on the outlet
of the sealed chamber and before the intake
and exhaust pipe. e appropriate diaphragm is
chosen based on type of pipe and its maximum
extension: this calculation can be made using
the tables below:
N.B.: the diaphragms are supplied together with
the boiler.
Key:
1 - Concentric
ue extraction
diaphragm
2 - Divided ue
extraction
diaphragm
Diaphragm
(ref. 1 g. 1-8)
Pipe extension in metres Ø
60/100 horizontal
Ø 85 From 0 to 0.5
Ø 83 From 0.5 to 1.5
WITHOUT Exceeding 1.5
Diaphragm
(ref. 1 g. 1-8)
Pipe extension in metres Ø
60/100 vertical
Ø 85 From 0 to 2.2
Ø 83 From 2.2 to 3.7
WITHOUT Exceeding 3.7
Diaphragm
(ref. 1 g. 1-8)
Pipe extension in metres Ø
80/125 horizontal
Ø 85 From 0 to 0.5
Ø 83 From 0.5 to 4.6
WITHOUT Exceeding 4.6
Diaphragm
(ref. 1 g. 1-8)
Pipe extension in metres Ø
80/125 vertical
Ø 85 From 0 to 5.4
Ø 83 From 5.4 to 9.5
WITHOUT Exceeding 9.5
Diaphragm
(ref. 2 g. 1-8)
Pipe extension in metres Ø
80 divided
intake exhaust
Ø 20.5 From 0.5 to 15 1
Ø 15 From 15 to 35 1
Diaphragm
(ref. 2 g. 1-8)
Pipe extension in metres Ø
80 divided
intake exhaust
Ø 20.5 1 From 0.5 to 8
Ø 15 1 From 8 to 16
WITHOUT 1 Exceeding 16
Diaphragm
(g. 1-9)
Pipe extension in metres Ø
60/100 horizontal
Ø 40 From 0 to 0.5
Ø 41.5 From 0.5 to 1.5
WITHOUT Over 1.5
Diaphragm
(g. 1-9)
Pipe extension in metres Ø
60/100 vertical
Ø 40 From 0 to 2.2
Ø 41.5 From 2.2 to 3.2
WITHOUT Over 3.2
Diaphragm
(g. 1-9)
*Extension in metres
horizontal pipe Ø 80 with
two bends
Ø 40 From 0 to 17
Ø 41.5 From 17 to 24
WITHOUT Over 24
Diaphragm
(g. 1-9)
*Extension in metres
vertical pipe Ø 80
without bends
Ø 40 From 0 to 22
Ø 41.5 From 22 to 29
WITHOUT Over 29
Diaphragm
(g. 1-9)
Pipe extension in metres Ø
80/125 horizontal
Ø 40 From 0 to 0.5
Ø 41.5 From 0.5 to 3.3
WITHOUT Over 3.3
Diaphragm
(g. 1-9)
Pipe extension in metres Ø
80/125 vertical
Ø 40 From 0 to 5.4
Ø 41.5 From 5.4 to 8.1
WITHOUT Over 8.1
DIAPHRAGM
* e values for maximum length are considered
with 1 metre of exhaust pipe and the remaining
on intake.
FAN POWER:
33W / 39W (Fig. 1-9).
FAN POWER: 30W (Fig. 1-8).
STD.010251/000

10
1.8 TABLES OF RESISTANCE FACTORS AND EQUIVALENT LENGTHS.
TYPE OF DUCT
Resistance
Factor
(R)
Equivalent length
in m of concentric pipe
Ø 60/100
Equivalent length
in m of concentric pipe
Ø 80/125
Equivalent length
in m of pipe
Ø 80
Concentric pipe Ø 60/100 m 1 Intake and
Exhaust 16.5 m 1 m 2.8 Intake m 7.1
Exhaust m 5.5
Concentric bend 90° Ø 60/100 Intake and
Exhaust 21 m 1.3 m 3.5 Intake m 9..1
Exhaust m 7.0
Concentric bend 45° Ø 60/100 Intake and
Exhaust 16.5 m 1 m 2.8 Intake m 7.1
Exhaust m 5.5
Terminal complete with intake-exhaust
horizontal concentric Ø 60/100 Intake and
Exhaust 46 m 2.8 m 7.6
Intake m 20
Exhaust m 15
Intake-exhaust terminal
horizontal concentric Ø 60/100 Intake and
Exhaust 32 m 1.9 m 5.3 Intake m 14
Exhaust m 10.6
Intake-exhaust terminal
vertical concentric Ø 60/100 Intake and
Exhaust 41.7 m 2.5 m 7
Intake m 18
Exhaust 14
Concentric pipe Ø 80/125 m 1 Intake and
Exhaust 6 m 0.4 m 1.0 Intake m 2.6
Exhaust m 2.0
Concentric bend 90° Ø 80/125 Intake and
Exhaust 7.5 m 0.5 m 1.3 Intake m 3.3
Exhaust m 2.5
Concentric bend 45° Ø 80/125 Intake and
Exhaust 6 m 0.4 m 1.0 Intake m 2.6
Exhaust m 2.0
Terminal complete with intake-exhaust
vertical concentric Ø 80/125 Intake and
Exhaust 33 m 2.0 m 5.5
Intake m 14.3
Exhaust m 11.0
Intake-exhaust terminal
vertical concentric Ø 80/125 Intake and
Exhaust 26.5 m 1.6 m 4.4
Intake m 11.5
Exhaust m 8.8
Terminal complete with intake-exhaust
horizontal concentric Ø 80/125 Intake and
Exhaust 39 m 2.3 m 6.5
Intake m 16.9
Exhaust m 13
Intake-exhaust terminal
horizontal concentric Ø 80/125 Intake and
Exhaust 34 m 2.0 m 5.6
Intake m 14.8
Exhaust m 11.3
Concentric adapter from Ø 60/100
to Ø 80/125 with condensate trap Intake and
Exhaust 13 m 0.8 m 2.2 Intake m 5.6
Exhaust m 4.3
Concentric adapter from
Ø 60/100 to Ø 80/125 Intake and
Exhaust 2 m 0.1 m 0.3 Intake m 0.8
Exhaust m 0.6
Pipe Ø 80 m 1 (with and without insulation)
Intake 2.3 m 0.1 m 0.4 Intake m 1.0
Exhaust 3 m 0.2 m 0.5 Exhaust m 1.0
Complete intake terminal Ø 80, 1 m
(with or without insulation) Intake 5 m 0.3 m 0.8 Intake m 2.2
Intake terminal Ø 80
Exhaust terminal Ø 80 Intake 3 m 0.2 m 0.5 Intake m 1.3
Exhaust 2.5 m 0.1 m 0.4 Exhaust m 0.8
Bend 90° Ø 80 Intake 5 m 0.3 m 0.8 Intake m 2.2
Exhaust 6.5 m 0.4 m 1.1 Exhaust m 2.1
Bend 45° Ø 80 Intake 3 m 0.2 m 0.5 Intake m 1.3
Exhaust 4 m 0.2 m 0.6 Exhaust m 1.3
Divided parallel Ø 80
from Ø 60/100 to Ø 80/80 Intake and
Exhaust 8.8 m 0.5 m 1.5 Intake m 3.8
Exhaust m 2.9
STD.010251/000