Impulse Rr700 User manual

RR700RR700

11X

RECUMBENT BIKE

Table Of Contents

Read all precautions and instructions in this manual before using this

equipment.

! CAUTION

Important Safety Information -------------------------------------------------------------------- 3

Warm Up Exercises ---------------------------------------------------------------------------------- 4

Parts List ----------------------------------------------------------------------------------------------- 5

Exploded View --------------------------------------------------------------------------------------- 7

Usage And Maintenance -------------------------------------------------------------------------- 9

Console Panel Functions ------------------------------------------------------------------------- 10

Troubleshooting Guide -------------------------------------------------------------------------- 15

─ 3 ─

Impor tant Safety Instructions

Warning

The safety of the product can be maintained only if it is examined regularly for

damage and wear. See preventive maintenance section for details.

1. Keep the area around the product clear of any obstructions, including

walls and furniture. Provide at least three feet of clearance behind

the unit.

2. Do not use the product outdoors, near swimming pools, or in areas of

high humidity.

3. Do not allow other people to interfere in any way with the user or

equipment during workout.

4. Supervise closely any children or disabled persons using the product.

Save these instructions for future reference

1. Always follow the console instructions for proper operation.

2. Do not reach into, or underneath, the unit; and do not tip the unit on its

side during operation.

3. Never insert objects into any opening of the Bike. If any object fall into

this equipment, carefully retrieve it while the unit is not in use. If the

object can't be reached, please contact customer services.

4. Never place any containers filled with liquids on the unit, except in

the accessory tray or water bottle holder. Containers should be covered

with lids.

5. Wear shoes with rubber or high-traction soles. Do not wear shoes with

high heels, leather shoes, slippers, or spikes. Make sure no sharp stuff is

embedded in the soles.

6. Do not use the bike with bare feet.

7. Keep all loose clothing, shoelaces, and towels away from moving parts.

8. Take extra caution when stepping on or off the bike.

9. Never face backward while using the bike.

Location

Operation

─ 4 ─

War m Up Exercises

EXERCISE GUIDELINES

WARNING! Before beginning this or any exercise program, you should consult your

physician. This is especially important for individuals over the age of 35 or individuals

with pre-existing health problems.

Warming up prepares the body for the exercise by increasing circulation, supplying more

oxygen to the muscles and raising body temperature. Begin each workout with 5 to 10

minutes of stretching and light exercise to warm up. The photos on this page show

several forms of basic stretching you may perform before your workouts. In order to

achieve an adequate warm-up, perform each stretch three times.

TOE TOUCH STRETCH

Stand, bending your knees slightly and slowly bend forward

from your hips. Allow your back and shoulders to relax as you

reach down toward your toes as far as possible. Hold for 15

counts, then relax. This will stretch your hamstrings, back of

knees, and back.

HAMSTRING STRETCH

Sit with one leg extended. Bring the sole of the opposite foot

toward you and rest it against the inner thigh of your

extended leg. Reach toward your toes as far as possible. Hold

for 15 counts, then relax. This will stretch your hamstrings,

lower back, and groin.

CALF/ACHILLES STRETCH

With one leg in front of the other, reach forward and place

your hands against a wall. Keep your back leg straight and

your back foot flat on the floor. Bend your front leg, lean

forward and move your hips toward the wall. Hold for 15

counts, then relax. To cause further stretching of the achilles

tendon, bend your back leg as well. This will stretch your

calves, achilles tendons, and ankles.

QUADRICEPS STRETCH

With one hand against a wall for balance, reach back and

grasp one foot with your other hand. Bring your heel as close

to your buttocks as possible. Hold for 15 counts, then relax.

This will stretch your quadriceps and hip muscles.

INNER THIGH STRETCH

Sit with the soles of your feet together and your knees

outward. Pull your feet toward your groin area as far as

possible. Hold for 15 counts, then relax. This will stretch your

quadriceps and hip muscles.

─ 5 ─

Par ts List

Item No. Description QTY Item No. Description QTY

1 Main Frame 1 35 Water Bottle Holder 1

2 Upright Frame 1 36 Water Bottle Holder Bracket 1

3 Adjustable Bracket 1 37 Shaft 1

4 Seat Pad Support Frame 1 38 Plug For Crank 2

5 Handlebar 1 39 Tightener 1

6 Leader 1 40 Spacer For Tightering 3

7 Adjustable Handle 1 41 Rubber Washer 2

8 Pull Spring 1 42 Leveler Foot 5

9 Nylon Idler Wheel 6 43 Pressure Plate 1

10 Bushing 4 44 Spacer 1

11 Dentoid Iron 1 45 Plastic Spacer 2

12 Net Back Pad 1 46 Adhesive Tape 1

13 Pull Spring 1 47 Poly-V Belt 1

14 Adjustable Shaft 2 48 PU Wheel 2

15 Adjustable Iron 2 49 Left Pedal 1

16 Bearing End Cover 2 50 Right Pedal 1

20 Left Cover 1 51 Left Crank 1

21 Right Cover 1 52 Right Crank 1

22 Top Cover 1 53 Seat Pad 1

23 Front Cover 1 54 Belt Pulley 1

24 Rear Cover 1 55 Tightening Nut 1

25 Plug 1 56 Tension Spring 1

26 Prevent Stepped Covering 1 57 To Slow Down Plate 2

27 Back Cover 1 58 Bundle Line 0.55

28 Decoration Cover 1 59 Undee Washer Φ20 2

29 Set-up Box 1 60 Hex Flange Screw 2

30 Front Base 1 61 Allen Screw M6*15 15

31 Rear Base 1 62 Washer Φ6.6*Φ15*2 5

32 Front Base Cover 1 63 Adjustable Washer 2

33 Rear Base Cover 1 64 Rivet Φ3.2*15 4

34 Crank Ring 2 65 Rivet Nut M5 4

─ 6 ─

Par ts List

Item No. Description QTY Item No. Description QTY

66 Rivet Nut M6*16.5 1 99 Allen Pan Bolt M6*12 2

67 Bearing 6203 2 100 Allen Pan Bolt M8*25 2

68 Bearing 6204 2 101 Allen Pan Bolt M8*45 2

69 Allen Nut M6 1 102 Allen Pan Bolt M8*60 2

70 Allen Nut M8 1 103 Nut 6

71 Allen Nut M10 5 104 Allen Pan Bolt 1/4"-20*19 4

72 Hex Head Bolt M8*20 4 105 Pules Plate 1

73 Hex Head Bolt M8*70 1 106 Pules Plate 1

74 Hex Head Bolt M10*25 12 108 Spanner 1

75 Hex Head Bolt M10*40 4 109 Spanner 1

76 Allen Bolt M5*15 3 110 Hex Key S=5 1

77 Allen Bolt M6*20 5 111 Hex Key S=6 1

78 Allen Bolt M6*20 5 200 Console Bracket 1

79 Allen Bolt M6*25 1 201 Console 1

80 Allen Bolt M8*20 2 E1 Console overlay 1

81 Allen Bolt M8*55 2 E1.1 Console LOGO Sticker 1

82 Pillip Screw M5*12 20 E2 Console Cable 1

83 Pillip Screw ST2.9*9.5 4 E3 Stopwatch 1

85 Pillip Screw ST4.2*9.5 8 E4 Wireless Receiver 1

86 Pillip Screw ST4.2*16 9 E5 Magnet Cord 1

87 Shaft Clip Φ10 2 E6 Controllor PCB 1

88 Shaft Clip Φ17 1 E7 Switching Cable 1 1

89 Shaft Clip Φ20 2 E8 Switching Cable 2 1

90 Spring Washer Φ6 8 E9 Console Cable 1

91 Spring Washer Φ8 12 E10 Stopwatch 1

92 Spring Washer Φ10 12 E11 EKG 1

93 Washer Φ5.5*Φ10*1 8 E12 Hand Pules Cable 1

94 Washer Φ9*Φ16*1.6 16 E13 Resistance Cable 1

95 Nylon Nut M6 5 E14 Control Cable 1

96 Nylon Nut M8 2 E15 Hybird 1

97 Nylon Nut M10 6 E16 Magnet Cord 2

98 Nylon Nut M12 4

─ 7 ─

Exploded View

─ 8 ─

Exploded View

─ 9 ─

Usage And Maintenance

Instruction

1. Max. User Weight is 180 Kg.

2. When moving the machine, grab the Rear Base to lift, then move it.

3. When using the machine, you must ensure it stand steadily on the . If it

isn't steady, you must adjust the Leveler Foot.

4. Adjusting the Seat Pad of the machine. Front and back, you must pull up the

Adjustable Handle, and move the Seat Pad down along the tube of the machine.

When it is ok, you can release the handle.

5. The machine has self-generating system (no power required).

Maintenance

1. Tighten the pedals every 3 months.

2. If the Bolts and Screws have the trend of losing, please lock them timely.

ground

Rear Base

Adjustable Handle

Leveler Foot

Seat Pad

─ 10 ─

Console Panel Functions

─ 11 ─

Console Panel Functions

CONSOLE PANEL FUNCTIONS

1. CALORIES WINDOW

Indicates estimated calories burned, based on user's weight, speed, resistance,

and time.

2. WATT WINDOW

Indicates user's current power ( Watt).

3. DISTANCE WINDOW

Indicates Kilometers or Miles traveled in 0.01 increments up to 9.99 and 0.1

increments starting at 10.0 (Range 0.01---999).

4. SPEED WINDOW

Indicates workout laps per minute on pedal.

5. TIME WINDOW

Indicates elapsed time after press Start in minutes and seconds (0-99minutes,

0-59seconds).

6. HEART RATE WINDOW

Indicates user's current heart rate (BPM).

7. RESISTANCE WINDOW

Indicates workout in degree of force L1—L20 in 1 increments.

8. DOT MATRIX

8.1 Indicates Welcome message when turn on power.

8.2 Indicates message when enter value.

8.3 Indicates workout curve in Program mode.

8.4 Indicates workout 400m track when manual.

CONSOLE BUTTONS

1. START

This button is used to start the current program.

2. RESET

This button is used to stop the current program.

3. + and -

These buttons are used to adjust the degree of Resistance of the machine during

workout.

These buttons are also used to adjust the values when entering up your workout.

─ 12 ─

Console Panel Functions

4. COOL DOWN

This button is used to select workout "cool down mode".

5. NUMERIC KEYPAD

These buttons are used to enter values.

6. OK

This button is used to confirm user seletion.

7. SELECTION BUTTON

This button is used to delete value entered.

8. MANUAL ONE TOUCH

This button is used to select workout "manual mode".

9. INTERVAL ONE TOUCH

This button is used to select workout "interval mode".

10. FAT BURN ONE TOUCH

This button is used to select workout "fat burn mode".

11. CARDIO ONE TOUCH

This button is used to select workout "cardio mode".

12. WEIGHT LOSS ONE TOUCH

This button is used to select workout "weight loss mode".

13. HEART RATE ONE TOUCH

This button is used to select workout "heart rate mode".

CONSOLE OPERATION

1. QUICK START/MANUAL MODE

1.1 Start the pedal

1.2 Indicates "PRESS QUICKSTART OR SELECT PROGRAM", "ENTER WEIGHT" in

dot matrix, '68' will flash in degree of force window. Use degree of force +

or – button to adjust user's weight.

1.3 Press "OK", indicates "PRESS QUICK START OR SELECT PROGRAM" in dot matrix.

(1) If press QUICK START button through manual mode;

(2) If press FAT BURN button through fat burn mode;

(3) If press INTERVAL button through interval mode;

(4) If press CARDIO button through cardio mode;

(5) If press HEART RATE button through heart rate mode;

(6) If press WEIGHT LOSS button through weight loss mode.

1.4 If press RESET button will be reset.

─ 13 ─

Console Panel Functions

2. PROGRAM MODE

2.4 PROGRAM

2.4.1 FAT BURN

Press FAT BURN button

(1) Indicates FAT BURN MODE in dot matrix, Time window will flash "30:00”.

Use degree + or – button to adjust value;

(2) Indicates workout curve in dot matrix after 5 seconds;

(3) Indicates ENTER TIME in dot matrix after 5 seconds;

(4) Indicates PRESS QUICK START in dot matrix after press OK button.

2.4.2 INTERVAL

Press INTERVAL button

(1) Indicates INTERVAL MODE in dot matrix, Time window will flash "30:00”.

Use degree + or – button to adjust value;

(2) Indicates workout curve in dot matrix after 5 seconds;

(3) Indicates ENTER TIME in dot matrix after 5 seconds;

(4) Indicates PRESS QUICK START in dot matrix after press OK button.

2.4.3 CARDIO

Press CARDIO button

(1) Indicates CARDIO MODE in dot matrix, Time window will flash "30:00”. Use

degree + or – button to adjust value;

(2) Indicates workout curve in dot matrix after 5 seconds;

(3) Indicates ENTER TIME in dot matrix after 5 seconds;

(4) Indicates PRESS QUICK START in dot matrix after press OK button.

2.4.4 HEART RATE

User must wear chest belt when through HEART RATE mode;

HR1: Target pulse is 65% of Max. pulse;

HR2: Target pulse is 75% of Max. pulse;

HR3: Target pulse is 85% of Max. Pulse.

─ 14 ─

Console Panel Functions

2.4.4.1 HEART RATE 1

Press HEART RATE button to cycle through HEART RATE 1, HEART RATE 2, HEART

RATE 3

(1) Indicates HEART RATE 1 in dot matrix, Time window will flash "30:00”. Use

degree + or – button to adjust value;

(2) Indicates ENTER TIME in dot matrix after 5 seconds;

(3) Indicates ENTER AGE in dot matrix after press OK button, Pulse window will

show target pulse;

(4) Indicates PRESS QUICK START after press OK button.

2.4.4.2 HEART RATE 2 - HEART RATE 3

Press HEART RATE button to cycle through HR2, HR3, the same with HR1.

2.4.5 WEIGHT LOSS

Press WEIGHT LOSS button

(1) Indicates WEIGHT LOSS PROGRAM in dot matrix, Time window will flash

“30:00”. Use degree + or – button to adjust value;

(2) Indicates workout curve after 5 seconds;

(3) Indicates ENTER TIME after 5 seconds;

(4) Indicates PRESS QUICK START in dot matrix after press OK button.

─ 15 ─

Troubleshooting Guide

Malfunction Probable Cause Corrective Action

Belt transmitter electrodes are not

wet enough to pick up accurate

heart rate readings.

Wet the belt transmitter electrodes.

Belt transmitter electrodes are not

laying flat against the skin.

Ensure the belt transmitter

electrodes are laying flat against the

skin.

Belt transmitter needs cleaning. Wash the belt transmitter with mild

soap and water.

Belt transmitter is not within 3 feet

(one meter) of the heart rate

receiver.

Make sure the chest strap

transmitter is within three feet (one

meter) of the heart rate receiver.

Chest strap battery is depleted.

Contact Customer Support Services

for instructions on how to have the

chest strap replaced.