JWA Luca 71438 User manual

1
Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please refer to your receipt
ASSEMBLY INSTRUCTION
Luca
ITEM CODE:71438
Coffee table

Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage
the product
2. Take care when lifting. Product should be assembled as near as possible to the point of
use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
7. Assembly is to be carried out by a competent adult(s) ONLY
8. During assembly, children should be kept away from the product due to possible risk to
injury.
9. Do not use this item if any components are missing or damaged.
10. Please keep the instructions for future reference.
2
PRE-ASSEMBLY PREPARATION
Allow 30 min For 1 person

3
PARTS LIST
①Table top
②Frame
③Bottom-connection bar
④Top-connection bar

•Insert the two Bottow-connection bar ③and two
Top-connection bar ④with the two frame ②.
•Insert bolt B into Flat Washer A with Allen Key C to
connect the Top-connection bar ④and Bottom-
connection bar ③with the table frame ②. Loosely
tighten for now.
4
STEP 1:
③
③
④
④
②②

•Insert bolt B into Flat Washer A with Allen Key C to
connect the Top-connection bar ④with the Table
top ①. Loosely tighten for now.
5
STEP 2:
•Stand the table, top side up. Place is on a level
surface. Adjust the legs until the table is level. Now
go around and firmly tighten all the bolts.
STEP 3:
③
③
④
④
②②
①

6
ASSEMBLY IS COMPLETE

7
PRODUCT CARE:
As our timber is supplied from sustainable forests there will be natural variations in
surface texture and grain like knots, mineral streaks and sap runs that may affect
the finish. These differences in character are not defects, but distinctions that
make each piece of furniture unique
Our furniture is built to last. Following these steps for basic care should protect
your investment for years to come
•Dust frequently with a clean damp lint-free cloth. This will help remove
abrasive build up which can damage a finish over time
•Do not place hot objects on any furniture surface. Always use a hot plate
or placemat. Laminate and lacquer finishes on table tops provide added
scratch and heat resistance to our furniture, but they can still be damaged
without proper care
•Avoid exposing your furniture to strong sunlight, heat outlet, open
windows or dampness. Prolonged exposure to direct sunlight can fade the
finish of your furniture, while extreme temperature and humidity changes
can cause cracking or splitting
•Do not expose your furniture to any liquids. Never allow water to sit on
your furniture. Alcohol, nail polish and perfume are also dangerous as
they will dissolve the lacquer finish on contact and may require
professional repairs
•Do not allow plastic to come in direct contact with your furniture.
Chemicals in the plastic of placemats etc. may soften and mark the finish if
left in contact with the furniture for a period of time