Eco-Systems ECO-35C User manual

866.463.2611 •www.ecosystemsdisplays.com
Setups
Order #XXXXX - ECO-35C Sustainable Counter / Podium
Plan View

866.463.2611 •www.ecosystemsdisplays.com
General Info
7A
General Setup Instructions
•The setup instructions are created specifically for your configuration.
•Setup instructions are laid out sequentially in levels, including exploded
views and a logical series of steps for assembly. We encourage you to study
the instructions before attempting to assemble your exhibit.
Hex Tool for Assembling Exhibit Extrusion Lock Connectors
Numbering Instructions for Setups/Packing Inline Connection between Extrusions Baseplate Connection for Vertical Extrusions
Cleaning and Packing
•Use non-abrasive cleaners when cleaning extrusions or ECO Glass inserts.
•Use mild cleaners and soft materials such as cotton to clean all laminates.
•Keep exhibit components away form extreme heat and long exposure to
sun light. This will prevent warping and fading.
•Retain all packing material for ease of re-packing. This protects the exhibit
components and keeps each part organized.
Disassembling
•When disassembling exhibit, tighten all setscrews to prevent loss of hardware
in the shipping process.

866.463.2611 •www.ecosystemsdisplays.com
Step 1
1
6
2
73
8
5
6
4Infill
Infill
Infill
Infill
Infill
4A
9
10
6
7
Shelf Supports
attached using
velcro.
Item
1
2
3
4/4A
5
6/6A/6B
7/7A
8
9/9A
10/10A
Qty.
1
1
1
1/1
1
3/2/1
2/2
1
1/1
1/1
Description
38”h S44 Vertical Extrusion
38”h S44 Vertical Extrusion
38”h S44 Vertical Extrusion
47”h S44 Vertical Extrusion
38”h S44 Vertical Extrusion
18”w Z45 Horizontal Extrusion
16”w Z45 Horizontal Extrusion
Bottom Shelf
25”w Z45 Horizontal Extrusion
25”w S44 Horiozntal Extrusion
Steps:
1) Connect horiozntals [6] between vertcals [1 & 2], [3 & 4], & [4A & 5].
2) Attach horizontals [7] between assemblies [1/2/6] & [3/4/6].
NOTE: Vertical [2] has hinges and must face inward. Refer to detail below.
3) Connect horizontal [9] between verticals [3 & 5].
NOTE: Vertical [5] has hinges and must face inward. Refer to detail below.
4) Connect horizontal [10] between verticals [4 & 4A].
5) Insert side infill between [1 &2], [3 & 4], [4A & 5]
6) Insert large front infill between [4 & 4A] & small front infill between [1 & 4].
7) Secure infills with horizontals [6A], [6B], [7A], & [10A].
8) Attach horiozntal [7A] between verticals [2 & 3]
9) Attach horiozntal [9A] between verticals [3 & 5].
Steps Cont’d:
10) Insert Shelves and rest on pin on interior of kiosk.
11) Connect shelf supports to velcro on interior of kiosk;
place large interior shelf on supports.
12) Hang cabinet doors on hinges.
See Door Attachment detail.
7A
7A
6A
6B
6A
9A
10A
*
*
*
*
*
*
*
*
*
*
*
*
Door
Hinge
Hinge
Slide pin into
hinge attached
to vertical.
Slide door
hinge over pin.
Door Attachment
*
Pin

866.463.2611 •www.ecosystemsdisplays.com
Step 2
12
12
Counter Top
When assembled
Item
11
12
Qty.
1
2
Description
Counter Top
8.25”h Stand-Off Barrel Steps:
1) Attach Counter Top to assembled base. See Counter Top Attachment detail.
2) Attach stand-off barrels to threaded holes in the
counter top.
3) Connect Plex Counter to stand-offs and [10A] using screw caps.
See Upper Shelf to Counter Attachment detail.
Place countertop
onto frame
Align hole with pin Rotate pin. Spring
will push pin into hole.
Counter Top Attachment
Hole for lock
1 2 34
*Attach standoff barrels to counter
and secure in place. Secure upper
shelf to standoffs using screw caps.
Upper Shelf to Counter Attachment
Upper Shelf -
Clear Plex
Threaded hole
in counter top
Standoff
Barrel
Screw
Cap