Inakustik 004245114 User manual

HDMI
HDMI
HDMI
HDMI
HDMI
FORMATS
CONTROL
SPECIALS
3D
Full HD
Deep Color
HDCP
EDID Engine
DESCRIPTION
This HDMI splitter simultaneously distributes the image and sound of an HDMI
source (such as a Blu-ray player, PS3 or similar devices) to up to four displays
(such as LED/plasma TVs or projectors). The splitter is compatible with HDMI 1.4
and supports all common HDMI formats with its high bandwidth of up to 10.2
Gbps. These include 3D and Full HD 1080p as well as the new high-resolution
4k x 2k format. The Intelligent EDID management system (EDID Engine)
automatically generates EDID datas that are neccessary for best picture & sound
of the connected screens. This ensures that all screens can play picture and
sound simultaneously.
SCOPE OF DELIVERY
1 x Splitter
1 x Power Supply
1 x User Manual
Cable length IN: 20m
TECHNICAL DATA
Data rate: 10,2 Gbps
Dimensions: 157 x 23 x 70mm
Operating voltage: 230VAC bzw. 5V / 12W
Cable length IN: 20m
Cable length OUT: 20m
* The indicated cable lengths refer to the TOTAL LENGTH between the
components (do not add!). The maximum cable length depends on the cable
quality, to be transmitted formats as well as the surrounding situation or
external influences.
CE-konform
RoHS-konform
IN 1
OUT 1
OUT 2
OUT 3
OUT 4
*
20m
*
20m
PREMIUM HDMI SPLITTER 1 -> 4 HIGH SPEED | 3D | 4K
004245114
ITEM-NO.:
EAN:
4001985509614
HDMI
CATEGORY:
4K

1. GENERAL
Read, observe and adhere to the following safety instructions. Please keep the operating manual. Observe all the warning notices on the components and in the operating manual.
2. PROPER USE
The components are solely designed for operation indoors. Connect them as specified in the operating manual. Only use accessories which have been recommended by the manufacturer.
3. HUMIDITY
Select an installation location for the components which does not have a high level of relative humidity and is free of moisture. Never use the components near water. Moisture can bypass the
electrical insulation and pose a lethal danger, as it can for all products not specially designed to be water-resistant. The components may not be exposed to dripping or sprayed water.
4. PRODUCT PROTECTION
Do not under any circumstances expose the components to high levels of humidity. Extreme temperature fluctuations, humidity and extended exposure to light can damage the components and
alter their appearance. Make sure that no foreign objects or liquids enter the components.
5. POSITIONING
The components are solely designed for use indoors.
Do not position the components near sources of heat, heaters, heating valves, ovens or other heat-producing devices. The components may only be stored and operated in the temperature
range stated. The components heat up during operation.
6. CONNECTION
The components must only be connected to the specified rated voltage! All cables must be positioned in such a way that there is no danger of them being damaged (e.g. being stepped on,
placed under furniture etc.). Never remove cables by pulling the cable; instead, always hold the plug when disconnecting. In stand-by mode, the components are not completely disconnected
from the mains supply. To avoid any unnecessary hazards or energy consumption during longer absences, the components should be disconnected from the mains supply.
7. MAINTENACE
Maintenance on the product may only be performed by persons qualified to do so. Maintenance is necessary in all cases of damage, i.e. in the case of damaged cables and plugs, as well as
after liquid spills or objects falling on the components, components falling down, foreign bodies entering the components, exposure of components to rain or humidity, or other influences
impairing the functioning of the components.
8. CARE
Disconnect the components from the power supply before cleaning them Always clean the components with a soft, dry and lint-free cloth, or with a brush. Do not under any circumstances use
scouring powder, alcohol, benzine, furniture polish or similar substances.
DOWNLOADS + SUPPORT
GENERAL INSTRUCTIONS
Note: All product pictures similar. Subject to
change.
in-akustik GmbH Co. KG
Untermatten 12-14
79282 Ballrechten-Dottingen
Germany
Tel.: [phone]
Fax: [phone]
E-Mail: [email protected]
Web: www.in-akustik.de
For our installation products, we also offer an after sales service. For technical questions regarding the product or the right cable connection, please contact our support team directly.
You can contact our experts Monday to Friday from 9–12 a.m. and 13–17 p.m. on the telephone number [phone].
On our website, www.in-akustik.de, you can download datasheets and user manuals.