InCarTec 27-574 User manual

27-574—CAMERA INTEGRATION FOR BMW ID7/MGU IDRIVE SYSTEMS (WITH 10.2 OR 12.3 INCH SCREENS)

27-574—CAMERA INTEGRATION FOR BMW ID7/MGU IDRIVE SYSTEMS (WITH 10.2 OR 12.3 INCH SCREENS)
DIP SWITCH SETTINGS
Please disconnect & reconnect interface power aer changing any DIP seng
Shortcuts for DIP Sengs:
1. Add aermarket backup camera (CAN reverse)
4 OFF, 5 OFF, 6 OFF, 7 OFF, 8 OFF
2. Add aermarket backup camera (Reverse detect)
4 OFF, 5 OFF, 6 OFF, 7 OFF, 8 ON
Long press MENU for 2 seconds to switch to DVR.

27-574—CAMERA INTEGRATION FOR BMW ID7/MGU IDRIVE SYSTEMS (WITH 10.2 OR 12.3 INCH SCREENS)
INSTALLATION GUIDE
Please ensure the car is switched o to avoid damaging the interface/ vehicle
1. MGU plaorm system 2. Use a panel tool to li the le and
right interior away.
3. Remove the screws on the le and
right bezels.
4. Use a panel tool to lt down the
enre control panel
5. Remove the centre
control panel
6. Remove the two
screws as shown
7. Remove the dual
plasc box

27-574—CAMERA INTEGRATION FOR BMW ID7/MGU IDRIVE SYSTEMS (WITH 10.2 OR 12.3 INCH SCREENS)
8. Make the power
connecons (As shown in
the installaon diagram)
9. Use a panel tool to lt
down the xed bezels on
the display and remove
the screws on both sides
10. Remove the central display 11. Make the LVDS
connecons (As Shown in
the installaon diagram