Infineon EZ-USB FX3 USB3 Vision solution demo kit User manual

Quick start guide
EZ-USB™FX3 USB3 Vision solution demo kit
CY-RB4111
www.infineon.com/FX3
Kit contents
1. EZ-USB™FX3 USB3 Vision solution demo kit
2. SuperSpeed USB-C cable
3. HDMI cable
4. Quick start guide (this document)

Quick start guide
Step 1: Hardware setup
1.Connect the kit to the PC using the Super Speed
USB-C cable provided with the kit.
2. Connect any HDMI source, such as a camera,
TV set-top box, gaming console, or PC HDMI
OUT, to the HDMI IN port of the kit using the
supplied HDMI cable.
Boot mode switch in SPI mode
Connect kit to PC and HDMI source via SuperSpeed USB-C and HDMI cables respectively
Before you start
1. Ensure that you have a Windows 10 PC
with the following:
› One USB 3.x Type-C port
› 1.0 GHz or higher CPU clock
2. Download and install Pleora eBUS Player:
› For https://tinyurl.com/Window64Bit
› For https://tinyurl.com/Window32Bit
3. Set the boot mode switch SW1 to boot
from SPI flash (SW1.1 – ON, SW1.2 – OFF).

Quick start guide
Step 2: Select USB3 Vision device in
eBUS Player
1. On eBUS Player, click Select/Connect.
2. Check if FX3 is detected.
3. Click OK.
Selecting USB3 Vision device in eBUS
Player application
Step 3: View the video stream
1. Click Play.
2. Observe the streaming video in the display
pane.
3. View the streaming statistics in the status
pane below the display pane.
Note: If FX3 is not detected, go to
“C:\Program Files\Common Files\
Pleora\eBUS SDK\U3V\Certified”
and install the U3V driver.
Video stream
Installing driver for USB3 Vision player (eBUS player)

Quick start guide
See the kit guide available on the kit website for details.
Date: 10 / 2022 All rights reserved. ©2022 Infineon Technologies AG
Document number: 002-36119 Rev. *A
ECP5 FPGA from
Lattice Semiconductor (U10)
Boot mode
switch (SW1)
CY-RB4111 EZ-USB FX3™ USB3 Vision solution demo kit card (Top view)
EZ-USB™ FX3
device (U6)
SPI flash (U11)
USB-C
connector
(J1)
HDMI
connector
(J6)
HDMI receiver (U17)
JTAG connector (J12)
DDR3 RAM (U12)
CY-RB4111 EZ-USB FX3™ USB3 Vision solution demo kit card (Bottom view)