Infiniton PAC-CS75 User manual

PAC-CS75
Portable Air Conditioner
Instruction Manual
Thanks for choosing this superb air conditioner.
Please read carefully this manual before using.
Any problems, please consult professional serviceman for help.

Contents
Users Know-how
Precautions.........................................................................................1
Safety Warnings................................................................ 3
Tips................................................................................................... 6
Product Overview
Main Components........................................................................
7
Control Panel and Remote Control............................................
8
Operation
PlaceandInstall..........................................................................
9
How to Operate..................................................................... 14
Clean and Maintenance
Drainage......................................................................................
15
Care.............................................................................................15
Common Failures and Diagnosis
Intelligent Error Detection.........................................................18
Repair..........................................................................................18
Technical Data
FuseParameter....................................................................................
18
Appearance andSize...........................................................................
19
Warranty Card.................................................................................. 20

1
Precaution
For household use only
For indoor use only; please
place the A/C in a dry
environment.
In case of a blocked air
exchange, never stack any
items around the machine.
To avoid damages, never
place any heavy items on the
machine.
USER KNOWLEDGE
The meaning of this user manual is shown below.
Please avoid such operations, in case of any safety and health risks.
Such instructions are to be followed, for safety and health concerns.

2
Clean the filter once every two
weeks
For your health, never drink
condensed water discharged
from the machine.
Please unplug the power cord, if
the machine will not be used for
a long time.
Nonprofessionals are not
allowed to dismantle or repair
themachine.
Please wipe the machine with a
soft cloth, instead of wax,
diluent or irritant detergent.
Do not operate the machine
with wet hands or in a humid
environment.

3
Safety Warnings
Damaged power cord or plug
shall not be used. Never plug
to a loosesocket.
Never damage the power
cord, or use unlicensed power
cord. Make sure voltage is
right.
Do not modify or extend the
power cord.
A grounded outlet is
suggested for the machine.
In case of electric shock,
never plug/unplug with wet
hands.
To unplug, pull the plug end
instead of wires.

4
Please turn off the machine
before unplugging.
Never control on/off status by
directly plugging/unplugging.
Never overload the socket.
Keep away from heat sources
or direct sunlight exposure.
If there is any actue noise,
smell or smoke, turn off and
unplug for diagnosis.
In case of electric shock, never
damage the power cord by
placing heavy objects on it.

5
Keep electrical parts away
from water.
Never insert fingers or any
hard objects into the louver.
If water enters, turn off and
unplug in time; and call for
checkandrepair from a
professional serviceman.
Please turn off and unplug
before wiping, cleaning or
replacing components.
If gas leakage happens, open
the window for ventilation
before plugging the machine.
The appliance can be used by
children of or above 8 years old
and persons with reduced physical,
sensory or phycological
capabilities, if they have been
given supervision and instruction
concerning proper use and hazards
of the appliance.

6
Tips
For a proper work of
compressor, place the
machine vertically on an even
ground.
For a proper ventilation, keep
the machine at least 50cm
from objects nearby.
Never use the appliance near
gasoline or other flammable
objects.
Keep the appliance from
spraying agent or any
solvent，or plastics may
deform and electrical parts may
even be damaged.
50cm

7
Product Overview
Main Components
3
1 Handle
02
2 Air Inlet Grille (Up)
6
3 Control Panel 7
8
4 Casters 4
5 Louver
6 Air Outlet Grille
7 Drainage Hole
8 Air Inlet Grille (Down)
9 Air Exhaust Duct Assembly
10 Window Sealing Kit
9
10
1
5

2
3
4
56
1
9
5
7
8

9
Operation
Place
Place the machine on the horizontal floor
near the window.
For proper ventilation and best machine performance,
keep the appliance at least 50cm from objects nearby.
Install Air Exhaust Duct Assembly
Connector Air exhaust duct Flat nozzle
Screw-fixture Type
Optional Window Sealing Kit
Clip-fixture Type
Plate#1
Plate#2
Plate#1
Plate#2
Screw Clip
Place & Install
Best Install
Installatio
50cm
90cm

1
0
Step 1:
Screw-fixture type
1.Measure window size;
2.Adjust Length of the plate according to
window size;
3. Fix the plate with a screw
Fix the screw Firmly Clip-fixture Type
1.Measure window size;
2.Adjust Length of the plate according to
window size;
3. Lock the plate
Step 2:
Fix the plate to window
Step 3:
Swirl the exhaust pipe assembly (exhaust fitting end)
into the rear panel outlet (counterclockwise).

1
1
Step 4:
Insert the exhaust pipe assembly (exhaust port end) into the window seal panel
assembly and screw it up.
Impression Drawing of Completion
螺钉
小缺口
先插入

12
Incorrect installation
It‟s important to keep the exhaust duct smooth. Incorrect installation will affect work of the A/C.
Prevent the exhaust duct from sharp bending.
Ensure air can flow smoothly in the duct.
Warning
The exhaust duct is designed especially for this model. Don‟t replace or lengthen it; otherwise, it
will result in failure.
Notice:
The air exhaust duct can stretch up to 1500mm. To avoid bending, stretch it as
short as possible
REMOTE CONTROL
Please install the battery correctly before using the remote control. The specific
steps are as follows:
1 Slide to open the battery cover on the back；
2 Insert 2*AAA（DC1.5V) new batteries and install electrodes
correctly when inserted;
3 Fit the batteries in place.
Warning:
1 Only AAA DC 1.5V batteries are allowed, never use chargeable batteries or
other types of batteries.
2 Replace both batteries; never mix new battery with old one.
3 Please remove batteries if the appliance is not to be used for a long time.

13
Warning:
1 Never use leaked batteries;
2 Chemicals in batteries could result in such health hazards as burns. If liquid
in batteries splashes to skin or clothes, please wash with clean water in
time. If batteries are swallowed, please rinse mouth immediately with clean
water and then go to the doctor.

14
Cooling
Mode
Operation
· Under cooling mode, cooling indicator will light on.
· Temperature Setting is from 16℃to 30℃.
· Press Fan Speed Button to choose from low/ high fan speed.
Fan Mode
· Under Fan mode, indicator will be on.
· Press Fan Speed Button to choose from low/ high fan speed.
· Temperature cannot be set under this mode.
Dry Mode
· Dry indicator will be on under this mode.
· Remove water plug (see right), insert one end of pipe to
drainage hose，the other end would be in water tank or
water channel.
· If ambient Temp. ≥17℃（or 62℉）compressor starts and
follow below sequence: if ambient Temp. ≤15℃(or 59℉）
compressor stops；when it reaches ≥17℃，compressor
starts again.（There would be a 3-min delay for
Compressor protection）
· Fan runs with a fixed low speed.
· Temp. is fixed.
(Notes：Under dry mode，please dismantle air exhaust duct，or
performance will be affected and water full alarm“FL”will buzz.)
Heating Mode (not available for cooling only model)
· Under this mode, heating indicator will light up.
· Press UP/DOWN button to select Temp. between 16℃and 30℃.
· Press Fan Speed button to set low/ high speed.

15
Timer Mode
· In standby mode, press Timer button to set ON time. A range of 0 to 24 Hours
could be set with UP/DOWN button. Timer indicator will light up in this mode.
· Under running state ， press Timer button to set OFF time. A range of 0 to 24
Hours could be set with UP/DOWN button. Timer indicator will light up in
this mode.
Clean and Maintenance
Drainage
With self-evaporating system, the appliance could perform better and save energy
in a way of cooling down condensor by reusing condense water.
The appliance would display „FL‟ with buzz sound, if built-in water container is full.
After compressor stops, please drain water as follows:
1 Unplug and dismantle air exhaust duct;
2 Move the appliance to a right place;
3 Pull out the water plug，and drain all water;
4 Re-insert the water plug;
5 Re-install the air exhaust duct, restart the appliance.
Maintenance
Warning: In case of electric shock, turn off and unplug before repair or maintenance.
Body Clean
1 Unplug before cleaning.
2 Clean with soft and half-wet cloth. In case of damage to
appearance or the appliance, never use chemical reagent,
such as benzene, alcohol and gasoline.
3 Never let splash water enter the appliance.

16
Filter is to be cleaned once every two weeks. If air quality indoor is poor, it has to be
washed more often, or performance of the appliance would be lowered due to
blocked filter screen. Please follow below instructions for cleaning:
Take off air-inlet grille as indicated in the photo;
pull out the filters.
Clean the filter in 40℃warm water or water with neutral detergent；
dry the filter in a cooling area.
Re-install the filter and grille after drying completed; restart the appliance.
If filter is dirty, clean in 40℃warm
water or in water with neutral
deterget.
1
If filter is not that dirty, clean the
dust with a vacuum cleaner.
Warning:
Do not wash with filter in water above 40℃， or with irritating detergent such as
alcohol, gasoline and benzene.
In case of deformation, filters are to be kept away from heat sources and dried
naturally in a cooling area.
Never operate the appliance when filter is not installed.
2

17
1
1
Seasonal Maintenance
If the appliance will not be in use for along time, please maintain by following below steps：2
Pull out water plug for drainage.
Run in Fan mode for at least 2 hours to dry internal parts.
Turn off and unplug.
Clean the filter and reinstall.
Dismantle the air exhaust duct and keep it well。
Take off batteries.
Wrap the appliance in a plastic bag and
keep in a dry and cooling place
If the appliance haven't been used for along time, please pay attention to the
following when to be used again：
Make sure water plug and filter are installed.
Never use damaged power cord; Check before use.
Insert batteries.
Assemble other parts according to the instruction.
2
4
3
5
6
7
2
3
4

18
Common Failures and Diagnosis
Error-detecting code
Multi-functional defection
E1
Error of the coil‟s temperaturesensor
E2
Error of indoor temperature sensor
E4
Anti-freezing protection: temperature of the coil is too low and the whole A/C is
off. When temperature excesses 8℃,the protection is released and previous
working state is recovered.
TROUBLE-SHOOTING
The following table lists the common faults and maintenance methods of this series of portable
A/C. When the machine is in abnormal operation, the following
table can be used for simple diagnosis and maintenance. If it still can not be solved, please contact
professional maintenance personnel.
TROUBLE
CAUSE
SOLUTION
TheA/C
doesn‟t work
No display
Reset circuit breaker on AC cord
Thedisplay“panel”displays“FL”
Restart the A/C after power off and
draining, then it will become normal
Time OFF function is started
The A/C can be restarted 3 minutes
after being turningoff
The A/C
starts frequently
Direct sunlight
Draw the curtain
Doors and windows keep open; there
are lots of people or heat source in
room
Close doors and windows,
remove heat source
Filter screen is very dirty
Clean or replace it
Air inlet or air outlet is blocked
Remove the stem
Big noiseof
the A/C
The A/C is placed unevenly
Place it at even and firmground, avoid
shaking
Thecompressor
doesn‟t work
Its delay protection is started
Wait for 3min, turn on after
temperature decreases
Intelligent Error Detection