inforce 6vx User manual

INFORCE®
©2011 EMISSIVE ENERGY Corp. An ISO9001:2008 Certified Company.
135 Circuit Drive, North Kingstown, RI 02852; Tel: [phone]; Fax: [phone]; www.inforce-mil.com
IINFORCE and EMISSIVE ENERGY are registered trademarks of Emissive Energy Corp. 9vx and the distinctive shapes, styles, packaging configurations and overall appearances
of INFORCE lighting systems are trademarks of Emissive Energy Corp. Designed and manufactured under one or more of the following U.S. and International patents: U.S.:
6,966,677; 7,121,680; 7,153,004; 7,226,183; 7,517,108; 7,652,303; 7,784,963; D526,730; D565,220; D579,201; D596,329; D619,283. European: 467295-0001; 467295-0002.
Other U.S. and International patents are pending.
Designed and assembled in the U.S.A. of domestic and foreign components. INFORCE products qualify as “American Made” under the Buy America Act.
The INFORCE 9vx 300-lumen lighting system features a new multifunction tailcap switch which provides constant, momentary, high, low, strobe
and lockout modes. In addition, this new switch offers the ability to disable the strobe feature and reverse the sequence of high/low setting to
low/high at the first press of the button. The fiber composite body is lightweight and durable. A patented venting system keeps the light cool,
even with prolonged use. O-rings seal out water, dust and dirt to protect it under extreme conditions.
Designed and engineered specifically for military and law enforcement use with the finest materials and precision manufacturing techniques.
Every engineered aspect, whether in optics, electronics, materials, thermal dissipation, power management, durability or usability has been
driven by performance criteria.
CAUTION: Do not use counterfeit or inferior-quality batteries, as
they do not meet safety and performance standards and have
been the cause of personal and property damage. To ensure
safety and performance, the purchase of established brands,
such as Duracell®, Energizer®or Panasonic®is recommended.
300
LUMENS
RUN TIME: 3h
LOW POWER SETTING
60 Lumens
RUN TIME: 15h
NEW MULTI-FUNCTION TAILCAP SWITCH:
• Constant, Momentary, High, Low, Strobe and Lockout
• Reversible High/Low to Low/High Capability
• Strobe Disable Option
Bezel Diameter: 1.25 in. / 3.175 cm.
Length: 6.15 in. / 15.621 cm.
Weight: 4.75 oz. / 134.6 g.
(3) Lithium 123A Batteries Included
ITEM NUMBER BODY COLOR LED
INF-9VX-B-W Black White
INF-9VX-S-W Desert Sand White
Features and Benefits:
FIBER COMPOSITE BODY is ultralight and durable.
SINGLE-HAND OPERATION simple, reliable, intuitive tailcap switch
operates programs and modes.
BELT CLIP W/BUILT-IN LANYARD HOLE accepts 550 cord.
SCALLOPED HEAD designed to let the light “spill out” to indicate
that the light is on while in an upright position.
PATENTED HEAT RELEASING VENTS maximize LED performance and
keep the light cool to hold.
HIGH EFFICIENCY EMITTERS provide longer run times and are
virtually immune to failure.
PRECISION OPTICS provide focused hot spot and balanced peripheral light.
HIGH-IMPACT GLASS WINDOW
MIL-STD-810F Certified
LIMITED LIFETIME WARRANTY
PM1047/111807
9vxTM LED FLASHLIGHT

INFORCE®
6vxTM and 9vxTM FLASHLIGHT
USER MANUAL AND WARRANTY
BATTERY REPLACEMENT
Your INFORCE 6vx flashlight comes with (2) high-efficiency 123A Lithium batteries;
the INFORCE 9vx with (3).
To insert the batteries, turn the multi-function tailcap counterclockwise to remove it from
the flashlight body. Insert the batteries into the open handle, negative (–) end first.
Re-thread the multi-function tailcap clockwise onto the flashlight handle.
Notes:
• Whenreplacingbatteries,nevermixbatterytypeoroldandnewbatteries.
• Batteriescanleakandmaycausedamagetotheinsideofthelight.Removethe
batteries if the flashlight will be stored for more than 2 weeks.
• Flashlightheadsarenon-removable;anyattempttoremovetheheadwilldamage
the light and void the warranty.
• Thelightoutputoftheflashlightwilldimovertimeasyourbatteries start to drain. At
some point, batteries that have been depleted substantially will not have enough
energy to sustain a full high power output. At that time, there will be little to no
distinction when attempting to cycle between high and low modes. However, there
will still be enough energy in the batteries to produce useful light for a period of time.
This is not an indication that the batteries have to be changed.
CAUTION: Lithium batteries can explode or cause burns if recharged, shorted,
disassembled or exposed to water, high temperatures or fire. Please
follow manufacturer’s guidelines for safe storage, use and disposal.
If the light has been submerged, dry the exterior of the light prior to
replacing the batteries. Fresh and salt water will damage internal
electronics and batteries. Do not use counterfeit or inferior-quality
batteries, as they do not meet safety standards and have been the
cause of personal and property damage. To ensure safety and
performance, the purchase of established brands, such as
Duracell®, Energizer®or Panasonic®is recommended.
4-FUNCTION SWITCH OPERATION
• Formomentary on mode, press and hold the button for more than 1/2 second;
when the button is released, the light will turn off.
• Forhigh power mode, press the button once. If high power is on for more than
2 seconds, the next press of the button will turn the light off.
• Forlow power mode, press the button twice within two seconds.
• Forstrobe mode, two quick clicks of the button when in high power,
low power or off mode will activate the strobe.
• Forlockout mode, twist flashlight tailcap one half turn (180 degrees) counterclockwise.
TO DISABLE THE WHITE STROBE FUNCTION
1. Unscrew the tailcap one half revolution to the lockout position.
2. Press and hold the button.
3. Whileholdingthebutton,tightenthetailcapandthenreleasethebutton.
4. To reactivate the strobe function, repeat steps 1, 2 and 3.
TO REVERSE THE WHITE LIGHT POWER SEQUENCE
The white light feature has been set to high/low power sequence as a default. To reverse
the order to low/high sequence:
1. Press the button twice to activate the low power setting.
2. Press and hold down the button for approximately 5 seconds. The light will turn
off and then blink three times; the default will change from high/low to low/high
sequence. Release the button.
3. To return the setting to high/low power sequence, return to the low power setting
and repeat step #2.
MAINTENANCE /CLEANING INSTRUCTIONS
Your INFORCE flashlight has been designed to provide maximum performance with
minimum maintenance. Occasionally clean threads with a clean cloth and apply a thin
coat of silicon-based lubricant to the rubber O-ring; see above illustration. Do not use a
petroleum-based lubricant. Should the flashlight become dirty from dust, sand or caked-
on mud, rinse fully assembled light with water and dry with a soft cloth.
NEW PATENT PENDING MULTI-FUNCTION SWITCH
PRODUCT WARRANTY
EmissiveEnergyCorp.(EEC)warrantsourproductsandaccessoriestobefreeofdefectinworkmanshipandmaterialsforthelifetimeoftheoriginalowner.Wewillrepairorreplacetheproduct,
at our discretion, if it is determined by us to be defective. In countries or jurisdictions in which specific restrictions exist on lifetime warranties, EEC provides a 10-year limited warranty. Damage
to the product from misuse, abuse, neglect, use of other than INFORCE brand accessories, disassembly, defective batteries or altering the product from its original state voids the warranty.
Batterypowerdepletionandbatteryexpirationisnotcovered.Thiswarrantyisinadditiontoanddoesnotaffectyourstatutoryrightswithrespecttofaultygoods.
THISCONSTITUTESEEC’SENTIREWARRANTY;WEMAKENOOTHERWARRANTIES,WHETHEREXPRESSORIMPLIED,WITHRESPECTTOTHEPRODUCTS,INCLUDINGANDWITHOUTLIMITATION
TOWARRANTIESOFMERCHANTABILITYANDFITNESSFORAPARTICULARPURPOSE.EXCEPTFORTHEEXPRESSWARRANTYTOREPAIRORREPLACETHEPRODUCTASSETFORTHABOVE,EEC
ISNOTRESPONSIBLEFORANYDIRECT,SPECIAL,INCIDENTAL,CONSEQUENTIAL,EXEMPLARYORINDIRECTCOSTSORDAMAGES,REGARDLESSOFTHEFORMOFACTION,WHETHERIN
CONTRACT,TORT(INCLUDINGNEGLIGENCE),STRICTLIABILITYOROTHERWISE,EVENIFEECHASBEENADVISEDOFTHEPOSSIBILITYTHEREOF,NORISEECLIABLEFORANYSUCHCOSTSOR
DAMAGESCAUSEDBYMISUSE,NEGLIGENCE,MALFUNCTION,ALTERATIONORMODIFICATIONOFANYINFORCEPRODUCTS.BECAUSESOMESTATESDONOTALLOWTHEEXCLUSIONOR
LIMITATIONOFLIABILITYFORCONSEQUENTIALORINCIDENTALDAMAGES,INSUCHSTATESEEC’SLIABILITYISLIMITEDTOTHEFULLEXTENTPERMITTEDBYLAW.
©2011 Emissive Energy Corp.
EmissiveEnergyCorp.,135CircuitDrive,NorthKingstown,RI02852USA;Tel:401-294-2030;Fax:401-294-2050;www.inforce-mil.com
INFORCEandEMISSIVEENERGYareregisteredtrademarksand6vxand9vxaretrademarksofEMISSIVEENERGYCORP.Thedistinctiveshapes,styles,packagingconfigurations and overall
appearancesofallINFORCEflashlightsandlightingproductsaretrademarksofEMISSIVEENERGYCORP.DesignedandmanufacturedunderoneormoreofthefollowingU.S.andInternational
patents: U.S.: 6,966,677; 7,121,680; 7,153,004; 7,226,183; 7,517,108; 7,652,303; 7,784,963; D526,730; D565,220; D579,201; D596,329; D619,283.
European: 467295-0001; 467295-0002. Other U.S. and International patents are pending.
DesignedandassembledintheU.S.A.ofdomesticandforeigncomponents.Thisproductqualifiesas“AmericanMade”undertheBuyAmericaAct.
PI-INF-ZF-6VX/9VX/111807
O-RING
THREADS