Inge Dizzer l series User manual

About these Instructions

dizzer®L Series –Assembly Instructions 2(2019-03) E inge.1(2019-01) E inge Page 1 of 60

Assembly Instructions

dizzer® L Series

UF Modules for Horizontal Systems

About these Instructions

dizzer®L Series horizontal –Assembly Instructions 2.2(2019-06) E inge Page 2 of 60

Legal Notice

Manufacturer Details

Product

Modules of the dizzer®L Series, parts and components for installation, assembly and disassembly

Manufacturer

inge GmbH

Flurstraße 27

86926 Greifenberg

Germany

Applies to

Modules of the dizzer®L Series, parts and components for installation, assembly and disassembly

Duplication and archiving in any form whatsoever –including of excerpts –is only permitted with the written

consent of the manufacturer.

All brand and company names in these process and design guidelines are registered trademarks of the

corresponding companies.

Change Policy

The manufacturer reserves the right to change this assembly manual or any part thereof at any time in the

interest of continuous product improvement.

The company/party responsible for the assembly of the system described in this manual should obtain the

current inge®assembly instructions:

Download at: http://www.inge.basf.com

By e-mail to [email protected]g

By telephone under +49 8192 997-700

Change History

Version

Version date

Author

History

V 0

10/2016

Initial creation

V 1.0

11/2016

MT/JP

General adjustment

V 2.0

02/2019

MH/GS

Editorial adjustments

V2.1

05/2019

Editorial adjustments

V2.2

06/2019

Editorial adjustments

About these Instructions

dizzer®L Series horizontal –Assembly Instructions 2.2(2019-06) E inge Page 3 of 60

Table of Contents

1About these Instructions............................................................................................................................6

1.1 Objective of these Instructions ...........................................................................................................6

1.2 Target Groups.....................................................................................................................................7

1.2.1 Qualified Persons ..................................................................................................................7

1.2.2 Skilled Persons with a Supervisory Capacity ........................................................................7

1.2.3 Involvement of Other Persons...............................................................................................7

1.2.4 Involvement of Multiple Persons............................................................................................7

1.3 Symbols in this Manual.......................................................................................................................8

1.3.1 Instructions.............................................................................................................................8

1.3.2 Symbols.................................................................................................................................8

1.4 Storage and Transfer to Another Party...............................................................................................8

2Safety ...........................................................................................................................................................9

2.1 Follow the Instructions!.......................................................................................................................9

2.2 Intended Use ......................................................................................................................................9

2.2.1 Residual Risks.....................................................................................................................10

2.2.2 Conversions and Modifications............................................................................................10

2.2.3 Repairs.................................................................................................................................10

2.3 Standards and Laws.........................................................................................................................11

2.4 Obligations of the System Integrator ................................................................................................11

2.5 Obligations of the Operator ..............................................................................................................11

2.6 General Information on Safety and Warning Instructions.................................................................12

2.6.1 Categories and Structure.....................................................................................................12

2.6.2 Warning Symbols.................................................................................................................13

2.6.3 Signs Giving Instructions .....................................................................................................14

2.6.4 Safety Instructions ...............................................................................................................15

2.6.5 Position of Warnings............................................................................................................17

3Device Description....................................................................................................................................18

3.1 dizzer®L 40 PB.................................................................................................................................18

3.1.1 Components.........................................................................................................................18

3.1.2 Functional Description .........................................................................................................19

3.1.3 Technical Data.....................................................................................................................20

3.2 dizzer®L 55 ......................................................................................................................................21

3.2.1 Components.........................................................................................................................21

3.2.2 Functional Description .........................................................................................................22

3.2.3 Technical Data.....................................................................................................................23

About these Instructions

dizzer®L Series horizontal –Assembly Instructions 2.2(2019-06) E inge Page 4 of 60

4Loading, Transport and Storage .............................................................................................................24

4.1 General Instructions..........................................................................................................................24

4.2 Warnings...........................................................................................................................................25

4.3 Loading.............................................................................................................................................27

4.4 Transport ..........................................................................................................................................28

4.4.1 Transport Conditions ...........................................................................................................28

4.4.2 Checking the Freight............................................................................................................28

4.5 Storage .............................................................................................................................................28

4.5.1 Suitability of the Location.....................................................................................................28

4.5.2 Stackability...........................................................................................................................28

4.5.3 Checking the Available Space.............................................................................................28

5Loading / Assembly..................................................................................................................................29

5.1 Warnings...........................................................................................................................................29

5.2 General Specifications......................................................................................................................31

5.2.1 Calculation of Personnel Requirements ..............................................................................31

5.2.2 Tools and Consumables......................................................................................................32

5.3 Preparing for Assembly ....................................................................................................................33

5.3.1 Checking the Available Space.............................................................................................33

5.3.2Protecting the Work Area.....................................................................................................34

5.4 Checking the Delivery.......................................................................................................................35

5.4.1 Moving the Packages to the Work Area ..............................................................................35

5.4.2 Checking for Damage..........................................................................................................35

5.4.3 Checking the Delivery for Completeness ............................................................................36

5.4.4 Unpacking the Parts ............................................................................................................36

5.5 Loading of dizzer®L 40 PB in a Pressure Vessel.............................................................................37

5.5.1 Preparation before Module Loading ....................................................................................37

5.5.2 Module installation...............................................................................................................39

5.6 Loading of dizzer®L 55 in a Pressure Vessel ..................................................................................43

5.6.1 Preparation before Module Loading ....................................................................................43

5.6.2 Module installation...............................................................................................................45

6Service and Maintenance.........................................................................................................................51

6.1 Warnings...........................................................................................................................................51

6.2 Checks during Operation..................................................................................................................53

6.2.1 Eliminating Leaks.................................................................................................................53

6.2.2 Exchanging Parts.................................................................................................................53

6.3 Returning Modules............................................................................................................................53

About these Instructions

dizzer®L Series horizontal –Assembly Instructions 2.2(2019-06) E inge Page 5 of 60

7Disassembly and Disposal ......................................................................................................................54

7.1 Warnings...........................................................................................................................................54

7.2 Disassembly .....................................................................................................................................55

7.3 Disposal............................................................................................................................................55

8Customer Service .....................................................................................................................................56

8.1 Service Hotline..................................................................................................................................56

8.2 Ordering Spare Parts........................................................................................................................56

9Technical Documentation ........................................................................................................................57

9.1 Other Applicable Documents............................................................................................................57

About these Instructions

dizzer®L Series horizontal –Assembly Instructions 2.2(2019-06) E inge Page 6 of 60

1 About these Instructions

NOTE

READ THE INSTRUCTIONS!

Read these instructions completely before assembling and

disassembling the equipment. The information contained herein

will help you perform the work properly.

It is important to follow the safety instructions to prevent injury and

property damage.

Keep these instructions in a readily accessible place close to the

modules of the dizzer®L Series. If you transfer the modules of the

dizzer®L Series to third parties, be sure to include all of these

instructions

1.1 Objective of these Instructions

The instructions enable you to install and disassemble the modules of the dizzer®L Series

perfectly, safely and quickly.

The instructions also contain important information about maintenance of the modules of the

dizzer®L Series.

The order in which these instructions are presented is designed for optimal learning, enabling

you to work your way into the subject matter step by step

Warranty Policy

NOTE

ADHERENCE TO ALL INSTRUCTIONS!

Full and proper compliance with the Assembly Instructions is a

prerequisite for making a claim under the warranty.

Only the English-language version of the assembly instructions for

modules of the dizzer®L Series are legally valid. In the event of

making a warranty claim, the customer agrees to automatically

provide inge GmbH with a complete set of documentation.

Please contact inge GmbH if you wish to deviate from any of the

guidelines or specifications provided in this document and request

written approval in advance. Otherwise you risk invalidating any

warranty claims that you may make in the future.

The aim of this manual is to help our customers to enjoy the full benefits of our products. If you should notice

any mistake or have other suggestions for improvements, please send an email to

[email protected]→

About these Instructions

dizzer®L Series horizontal –Assembly Instructions 2.2(2019-06) E inge Page 7 of 60

1.2 Target Groups

1.2.1 Qualified Persons

These instructions are intended for skilled persons with the following qualifications:

Technical education

The skilled person must have technical education as a mechanic or mechatronics technician, for

example.

Several years of experience with the installation of industrial systems

The skilled person must also have several years of experience with the installation of industrial

systems.

Good language skills

The skilled person must know the language of these instructions well enough to be able to apply

the contents of these instructions and to impart these to other persons under his/her supervision.

1.2.2 Skilled Persons with a Supervisory Capacity

Skilled persons that meet all requirements in section 1.2.1 are considered to be "skilled persons with a

supervisory capacity".

1.2.3 Involvement of Other Persons

Other persons may only participate in the assembly or disassembly if continuously supervised and instructed

by the skilled persons with a supervisory capacity.

1.2.4 Involvement of Multiple Persons

Some tasks need to be performed by two or more persons for worker protection and safety reasons.

In these cases, the number of persons required is specified in the first step of the procedure.

About these Instructions

dizzer®L Series horizontal –Assembly Instructions 2.2(2019-06) E inge Page 8 of 60

1.3 Symbols in this Manual

1.3.1 Instructions

Activities are described as numbered steps that are presented in a table.

The headings of the activity descriptions are primarily intended for personnel with extensive experience in the

application of these instructions. They make it possible for the personnel to assemble or disassemble the

equipment primarily by reading these headings and observing the graphics.

Notwithstanding this, the detailed description is always binding.

Always read the entire description of a step before beginning with the work it describes.

1.3.2 Symbols

The following symbols are used in this manual:

SYMBOL

DESCRIPTION (EXAMPLES)

IMPORTANT NOTE!

Failure to follow the instructions in this note may lead to problems

with the product.

INFORMATION!

Following this information will make it easier to assemble the

modules of the dizzer®L Series.

CROSS REFERENCE!

Detailed information on this topic can be found in other

documentation.

1.4 Storage and Transfer to Another Party

Keep these instructions in a readily accessible place close to the modules of the dizzer®L Series. If you

transfer the dizzer®L modules to third parties, be sure to include all of these instructions.

Safety

dizzer®L Series horizontal –Assembly Instructions 2.2(2019-06) E inge Page 9 of 60

2 Safety

2.1 Follow the Instructions!

The modules of the dizzer®L Series UF elements can only be installed or disassembled safely if you first read

the instructions, understand these and follow them when assembling and disassembling the equipment.

The manufacturer has designed and built the product according to the latest engineering knowledge, thereby

ensuring the best possible safety and preventing injury, property damage and/or environmental damage.

A certain residual risk remains, which can only be avoided by following the correct procedures. The correct

procedures and all points that need to be followed are described in these instructions.

2.2 Intended Use

These instructions describe the requirements and procedures for:

Installation/assembly of the modules of the dizzer®L Series

Disassembly of the modules of the dizzer®L Series

The completely installed dizzer®L modules are intended only for the commercial ultrafiltration of water.

The intended installation and disassembly includes adherence to all specifications in these instructions.

Any other method of installation or disassembly is considered to be unintended use. inge GmbH cannot be

held liable for damage that results from unintended use.

Safety

dizzer®L Series horizontal –Assembly Instructions 2.2(2019-06) E inge Page 10 of 60

2.2.1 Residual Risks

Despite the inherently safe design as per DIN EN ISO 12100, the following residual risks remain:

Danger of crushing from falling raised loads

Danger of crushing by industrial trucks and other equipment at the construction site

Danger of injury from faulty and incomplete assembly

Danger of falling when using ladders, scaffolding and other climbing aids

Danger of crushing and shearing from work in the danger zone

Cutting and impact injuries from sharp corners and edges

Danger of tripping and impact from pallets, packages and assembled parts at the construction

site

Danger of injury due to physical strain

Danger of injury due to constricted space

Danger of injury due to inadequate room height

Danger of injury and system damage due to exceeding the maximum permissible floor load

Danger of injury to bystanders, machines and devices in the work area

Danger of injury during operation due to the installation and use of damaged parts

NOTE

In these instructions, these residual risks are indicated by

appropriate safety and warning instructions.

2.2.2 Conversions and Modifications

Conversion or modification is only permissible with the written approval from the manufacturer.

2.2.3 Repairs

Repairs may only be performed by qualified personnel following consultation with the manufacturer.

Safety

dizzer®L Series horizontal –Assembly Instructions 2.2(2019-06) E inge Page 11 of 60

2.3 Standards and Laws

The modules of the dizzer®L Series of inge GmbH are subject to the EC pressure equipment

directive 2014/68/EU, Article 4, Sector 3.

The locally applicable normative and/or statutory requirements for the installation and

disassembly of the modules of the dizzer®L Series must be complied with.

For tools, equipment, machines and facilities that are not included in the delivery, the conditions

and instructions of the respective manufacturer apply.

2.4 Obligations of the System Integrator

Ensure that every skilled person with a supervisory capacity (= target group) has a printed copy

of these instructions available for the entire duration of the installation and disassembly.

The current instructions can be downloaded here:

http://www.inge.basf.com

On request, we can send you the desired number of printed instructions free of charge.

You can reach inge GmbH under info@inge.ag or by telephone +49 8192 997-700.

Make the necessary personal protective equipment available to all people involved for the

duration of the work.

In case of deficiencies or loss, immediately replace the personal protective equipment.

2.5 Obligations of the Operator

Ensure that all persons working on the modules of the modules of the dizzer®L Series use the

personal protective equipment (safety shoes and helmet) made available to them for the duration

of the work.

Ensure that you are immediately informed in case of deficiencies or loss of personal protective

equipment. Provide a replacement immediately and do not allow work to be performed without

complete personal protective equipment.

Ensure that all persons working on the dizzer®L modules have read the assembly instructions

and follow the safety instructions and procedures described herein.

WARNING

CONSIDERABLE DANGER OF INJURY!

If you begin work without having read the information on the

respective procedural step (including any potential warning

instructions), this may lead to accidents.

Ensure that the operating personnel has the necessary

qualification and is sufficiently trained.

Read the description of a procedural step completely and do not

begin implementing the step before having done so.

Safety

dizzer®L Series horizontal –Assembly Instructions 2.2(2019-06) E inge Page 12 of 60

2.6 General Information on Safety and Warning Instructions

2.6.1 Categories and Structure

Depending on the severity of the impending or potential danger, the following types of safety and warning

instructions are differentiated:

DANGER

DANGER TO LIFE!

Personal injury due to an imminently hazardous situation. If this

situation is not avoided, it will lead to serious injury or death.

Actions to avert danger.

WARNING

CONSIDERABLE DANGER OF INJURY!

Personal injury due to a potentially hazardous situation. If this

situation is not avoided, it may lead to serious injury or death.

Actions to avert danger.

CAUTION

DANGER OF INJURY!

Personal injury due to a potentially hazardous situation. If this

situation is not avoided, it may lead to minor or moderate injury.

Actions to avert danger.

NOTE

CAUTION, PROPERTY DAMAGE!

Property damage due to an improper procedure.

Actions to avert danger.

Safety

dizzer®L Series horizontal –Assembly Instructions 2.2(2019-06) E inge Page 13 of 60

2.6.2 Warning Symbols

The following warning symbols are used in this manual:

WARNING

SYMBOL

DESCRIPTION

GENERAL DANGER SIGN