Ingersoll-Rand ARO 651729 User manual

INGERSOLL RAND COMPANY LTD
P.O. BOX 151 yONE ARO CENTER yBRYAN, OHIO 43506-0151
[phone] yFAX [phone] © 2008 CCN 99711277
uids.ingersollrand.com
OPERATOR’S MANUAL 651729
INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE.
INCLUDE MANUALS: 253XX-XXX Heavy Duty Air Line Filter-Regulator-Lubricator (pn 103942).
RELEASED: 9-9-94
REVISED: 5-7-08
(REV. D)
651729
Air Manifold Assembly
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
8

7
76
11
11

4
4
15
153
5
5 
12
12
13
13
Figure 1 3/4 - 14 N.P.T. Air Outlet
9
10
10


Apply anaerobic pipe sealant to male threads at assembly.
PARTS LIST
Item Description (size) (Qty) Part No.
3 Filter (1) 25351-010
4 Nipple (3/4 - 14 N.P.T. x 2”) (2) Y27-55-C
5 Gauge (1) 29728
6 Lubricator (1) 26351-010
7 Nipple (3/4 - 14 N.P.T. x 5-1/2”) (1) Y44-48-C
8 Elbow (3/4 - 14 N.P.T.) (1) Y43-15-C
9 Hose (3/4 - 14 N.P.T.F. x 1.5 feet) (1) 622651-1-F
Item Description (size) (Qty) Part No.
10 Swivel (1) 75367
11 “U” Bolt (1/4” - 20) (2) 76254
12 Nut (1/4” - 20) (4) Y12-4-C
13 Lock Washer (1/4”) (8) Y14-416
14 Mounting Plate (see gure 2) (2) 90935
15 Air Regulator (1) 27354-000
16 Cap Screw (1/4”- 20 x 5/8”) (see gure 3) (4) Y6-42-C

Page 2 of 2 651729 (en)
PN 97999-610
INSTALLATION
Position the two (14) mounting plates on the two post lift
mounting arm (see gures 2 and 3).
Using four (16) cap screws and four (13) lock washers, fasten
the mounting plates to the four holes located on the top of the
mounting arm.
Place the air manifold assembly on the mounting plates and
secure using two (11) "U" bolts, four (13) lock washers and four
1.
2.
3.
(12) nuts (see gures 1 and 2).
NOTE: The regulator is rotated upward 90° for easier viewing of (5)
gauge.
4. Connect the (9) hose and (10) swivel to the pump air motor
inlet.
5. Connect 1/2" i.d. air line hose to (3) lter.
14
14
91350
91350
Figure 2
Figure 3
Y12-4-C Nut (2)
Y14-416 Lock Washer (4)
76254 “U” Bolt
Y6-42-C Cap Screw (2)
90935 Mounting Plate
Mounting plate and parts included with
assembly (1 mounting bracket shown).