Ink Bird IBBQ-4T User manual

IBBQ-4T
Thermometer

󾙓 󾙔
󾙕󾙖
℃
Indicates the USB Type-C
Charging Port
Indicates the
Battery Life
Indicates Wi-Fi
connection status
Indicates the
Current Tempera-
ture Value
Indicates the But-
ton
H
L
℉
Indicates the
Centigrade Degree
Indicates the
Fahrenheit Degree
Iindicates Probes
H
L
H
L
H
L
Indicates the Low
Temperature Alarm
Indicates the High
Temperature Alarm
Indicates the Probe
Port
Probe with cable USB Charge Cable
(Length: 50cm)
Get to know the device
01

Press the power button for 1 second to turn on the device,
press the power button for 3 seconds to turn it off.
Insert probes into the device when the power is turned on,
then the device will display readings of the instant tempe-
rature.Please make sure probes are inserted into the center
of the food to get accurate temperature readings.
Search the Inkbird Pro app from Google Play or App Store
to download it for free, or you can scan the QR code to do-
wnload it directly.
Quick Start Guide (Turn ON/OFF)
02
Probe Installation
03
Free App Download
04

Android
ios
Please make sure all following requirements are met to do-
wnload the app smoothly:
Scan QR code to download
Inkbird Pro APP
Your iOS device must be running iOS 10.0 or above to dow-
nload the Inkbird Pro app.
Your Android device must be running Android 4.4 or above
to download the Inkbird Pro app.

Connect With Your Phone
05
Register before using the Inkbird Pro app. Select your
Country/Region, enter your phone number or e-mail, then
a verification code will be sent to you, enter it to confirm
your identity and the registration is done.
Press the power button of the thermometer quickly for 3
times, then the Wi-Fi icon of the device will blink rapidly,
which means the thermo- meter is available to connect.
Open the app and click “+”or “add device” to start the
connection.
Confirm the rapidly blink on your app and enter your Wi-Fi
password to connect to wireless network, click OK to co-
nnect the device.
Connection succeed.

If you have registered an account before, just log in directly.
Set
Instant
Temperature
Connection
Status
Preset
Probe Number
/Calibration
graph
Preset
Temperature
Doneness
Maximum Preset
Temperature
Minimum Preset
Temperature
Timer
Specification
06
Dimensions: 88mmx88mmx39mm/3.46"x3.46"x1.54"
Weight: 165g/5.82oz
Battery: 2000mAh built-in lithium battery
Short Time Measurement Range : from 0℃ to 300℃(32℉
~572℉)

Continuous Monitoring Range: from 0℃ to 250℃(32℉~
482℉)
Temperature Accuracy: ±1℃/±1.8℉
Wireless Connection: Wi-Fi Connection. Requires 2.4GHz
Wi-Fi (Support IEEE 802.11b/g/n)
Compatibility: iOS 10.0 or above, Android 4.4 or above
Display Type: Black-and-white LCD
Dimensions of LCD Display: 53mmx35mm
Waterproof Grade: IPx3 Rated
Data Storage: free App storage
Battery
07
Battery Type: Rechargeable built-in lithium battery
Capacity: 2000mAh/7.4Wh
Adapter: 5V/1A
Battery Charging
08
The empty battery icon flashes when the battery goes

below 20%.
The charging battery icon flashes when the battery is un-
der charging.
The battery icon stays still when charging is done.
The battery takes about 4 hours to refill and it will last ab-
out 26 hours without backlight once fully charged.
Please use a 5V/1A adapter to charge the product.
Warning
09
The maximum temperature for short time measurement
is 300℃/572℉ and the maximum temperature for long
time measurement is 250℃/482℉, the probe and the me-
tal wire will be burned out if the temperature go beyond
the maximum number.
Do not put probes or metal wire into fire or contact the
heating tube directly.
Do not put probes or the metal wire into water, it may lead
to inaccurate measurements.
Do not press probes and the metal wire too hard, it may
damage the the plastic film of the wire and lead to short
circuit.
Please take off the silicon case before using the probe.

Teflon cable
With stainless steel mesh
(Length: about 120cm/3.9ft)
Sensor
Non water-proof
Inkbird will provide 12 months warranty for all users since
the purchasing date, please contact us if you need supp-
ort or meet problems.
Warranty
10
Item List
11
Thermometer ×1
1Probe ×4
2
USB Cable ×1
3Probe Clip Holder ×2
4
Use’s Manual ×1
5Warranty Card ×1
6