INNOSILICON A9-ZMASTER User manual

A9-ZMASTER
USER MANUAL
INNOSILICON CONFIDENTIAL

Table of Contents
1. OVERVIEW 1
2. ASSEMBLE THE MINER 2
2.1 Check the miner before power on 2
2.2 Connect the PSU 3
3. OPERATE THE MINER 4
3.1 Enter the miner console 4
3.2 Set up the pool 4
3.3 Check the hashrate of the miner 5
3.4 Network configuration 5
3.5 Other pages 6
3.5.1 Overview 6
3.5.2 Upgrade 6
3.5.3 Modify the password 7
3.5.4 Reboot 7
3.5.5 Factory reset 7
INNOSILICON CONFIDENTIAL
INNOSILICON A9 ZMaster
INNOSILICON CONFIDENTIAL

1
1. OVERVIEW
INNOSILICON CONFIDENTIAL
A9 ZMaster
Part Number A9
Algorithm Equihash
Hash Rate 50Ksol/s (+-8% )
Power 620W +/-8%
Size (L×W×H) (L)360mm*(W)125mm*(H)155mm
Net Weight 5.13KG (without PSU)
Operating Temperature 0-40 ℃
Required rated PSU 1000W or above, 7 * PCI-E 6Pin
Network Connection Ethernet
INNOSILICON CONFIDENTIAL

2
2. ASSEMBLE THE MINER
2.1 CHECK THE MINER BEFORE POWER ON
·Check the warranty sticker is well or not, especially the hashboards PSU port side. If the warranty sticker
is damaged when you received the miner, please contact our After-sales.
·Before you power on the miner, shake the miner softly, if you can hear the sound of metal banging on
metal, please contact our After-sales.
·Check if the fan work well, if you find the fans broken please contact our After-sales.
INNOSILICON CONFIDENTIAL
A9 ZMaster
INNOSILICON CONFIDENTIAL

3
2.2 CONNECT THE PSU
Every hash board needs to be inserted with 2 PSU cable, controller only needs 1 PSU cable according to
the following image .
Note: Please contact out after-sales team if there is a hashboard not work.
2.3 CONNECT THE ETHERNET CABLE
Insert one end of the Ethernet cable into the router and the other end into the slot shown in the following
image.
IP SET button:
Press it 1—4 seconds, it will (1) show the IP of the miner in the “Set IP” tool; (2) change the miner to Static
IP mode and modify the IP to the IP range you set in the “Set IP” tool
Press it 4—15 seconds, the miner will become to DHCP and the settings of the miner should be restore to
default.
Press it more than 20 seconds to switch the Dynamic (Static) IP to Static (Dynamic)
RESET button: Your miner will restart if you press it. It wont recover your settings to the default.
INNOSILICON CONFIDENTIAL
A9 ZMaster
INNOSILICON CONFIDENTIAL

4
3. OPERATE THE MINER
3.1 ENTER THE MINER CONSOLE
DHCP(the Normal led on the control board should be blinking) is the default IP mode of the miner, find the
IP via the router or the IP scanner.Enter the IP of the miner on the browser and press the Enter button.
The chrome is the suggested browser.
INNOSILICON CONFIDENTIAL
A9 ZMaster
INNOSILICON CONFIDENTIAL
3.2 SET UP THE POOL
Note: Please don’t use the Default pool.

5
INNOSILICON CONFIDENTIAL
A9 ZMaster
3.3 CHECK THE HASHRATE OF THE MINER
After set up the pool, the miner will mine for you.
3.4 NETWORK CONFIGURATION
INNOSILICON CONFIDENTIAL

6
3.5 OTHER PAGES
3.5.1 OVERVIEW
3.5.2 UPGRADE
INNOSILICON CONFIDENTIAL
A9 ZMaster
INNOSILICON CONFIDENTIAL

7
INNOSILICON CONFIDENTIAL
A9 ZMaster
3.5.3 MODIFY THE PASSWORD
3.5.4 REBOOT
3.5.5 FACTORY RESET
INNOSILICON CONFIDENTIAL