Innovo iE100A User manual

Quick Start Guide
Digital Infrared Ear Thermometer
Model iE100A
Measuring unit
(
1) Unit button (Celsius/Fahrenheit)
(
2) Mode button (Ear/Object measurement mode)
(
3) LED display
(
4) Power/Measure button (with color coded ring)
(
5) Memory button
(
6) Sound button (On/Off)
(
7) Sensor lens
(
8) Ear probe
(
9) Battery cover
B
utton and its function
Button
Function
Power/Measure
button
Press once to power on or to
take measurement.
Press for about 3-4 seconds
to power off.
Unit button
To switch unit of
measurement between
Celsius and Fahrenheit.
Measurement
mode button
To switch between Ear and
Object measurement mode.
Memory button
To enter Memory mode.
Sound button
To turn sound on and off.
Screen display and symbol
d
esignation
M
easuring Eardrum Temperature
Note: Make sure both user and thermometer have
remained at a constant ambient temperature for at
least 30 minutes.
Step 1: Press the
Power/Measure button to
turn the thermometer on.
Step 2: The Ear
measurement mode ( )
is selected by default.
Place a new probe cover
securely on the
thermometer ear probe.

Step 4:
Press the
Power/Measure button
once. Reading will be
displayed in about 1
second.
Step 5: To take next
measurement, wait until
color coded ring stops
glowing. Press the
Power/Measure button
once and screen will
show “- - - -” and
blinking unit (°F or °C).
Load a new probe cover on the thermometer
probe. Repeat Step 3 and Step 4 above to
continue with measurement.
Measuring Object Surface
Temperature
Step 1: Press the
Power/Measure button to
turn the thermometer on.
Step 2: Press the Mode
button ( ) to switch
to Object measurement
mode ( ).
Step 3: Point
thermometer at the
object (for example: milk
bottle) within 2” or 5cm
distance away from the
surface.
Press the
Power/Measure button
once. Reading will be
displayed in about 1
second.
Note: Probe cover is not
required for measuring
object surface
temperature.
Note: To measure ambient
temperature, press the Power/Measure button
once without pointing at any object.
QUESTIONS?
[email protected]
1-858-888-9781
Feel free to contact customer support via :
Support Hours: Monday-Friday 9:00AM to 5:00PM CST
Innovo Medical
10101 Stafford Centre Dr, Ste B
Stafford, Texas 77477
Step 4: To take next
m
easurement, wait until
c
olor coded ring stops
g
lowing. Press the
P
ower/Measure button
o
nce and screen will show
“
- - - -” and blinking unit (°F
o
r °C). Repeat Step 3
a
bove to continue with measurement.
S
tep 5: To power off, press the Power/Measure
b
utton for about 3-4 seconds. Alternatively, if no
activity is
detected, device will also power off
automatically in 30
seconds.
T
o download the latest manual for the
t
hermometer, simply scan the QR code below or
v
isit https://innovo-medical.com/products/innovo-
i
E100A-thermometer
Use only genuine
Innovo ear probe covers
to ensure accurate
results. To order refills,
please visit innovo-medical.com
Step 6: To power off, press the Power/Measure
button for about 3-4 seconds. Alternatively, if no
activity is detected, device will also power off
automatically in 30 seconds.
Step 3: Insert thermometer probe into the ear
canal. For accurate measurement, perform an ear
tug so that the probe is aligned with the eardrum.